FT-5 R4 Mod 06 - Printer Head Carriage Mount E3D Hemera + BLTouch

Last crawled date: 4 years, 3 months ago

Update - 2020 Jan. 10
Deleted original parts and uploaded new parts - these parts were tested with a Hemera extruder on my FT-5 R2 printer (for fit.) Added version with lower mount for BL-Touch for the Volcano heat block (8.5mm lower BL-Touch mount).
This is a mount for the E3D Hemera Extruder for the FT-5 Printer that mounts the extruder under the X Axis Rail.
BL-Touch mount moved to the left side. Hemera mount offset to the right by 9mm to allow for full bed coverage.
Two versions for Hemera with V6 heat block, one for the Hemera with the Volcano heat block. For the V6 heat block version, one has the mount for the BL-Touch flush with the "front" of the mount (side on print bed when printing mount) and the second with the BL-Touch mount pushed back 8mm (PushedBack in the file name.)
The V6 Pushed Back BL-Touch mount, and Volcano version, leave room free around the manual feed on the Hemera extruder.
Each of the above is available with a tab for mounting the cable chain to, or without the tab for mounting the cable chain (NoChain in file name.)
Two holes at the top of Part A are to mount a 4mm ID/6 mm OD tubing to feed the filament to the extruder.
.STEP versions of all the files are included.
Only need support for the Cable Chain tab and for the BL-Touch mount if not pushed back 8mm.
Nozzle_To_Probe_Offset (-24, 23.25, ??) for V6 mount, flush to front
Nozzle_To_Probe_Offset (-24, 31.25, -2.80) for Pushed Back V6 BL-Touch or Volcano.