Thingiverse
Froggy 150 micro FPV racer by janmittner
by Thingiverse
Last crawled date: 3 years ago
This is my final design of indoor micro FPV quadcopter. It's based on my previous designs, but with some new features:
fits 3.5" propellers, which seem to be the best for indoor quad with 1306 3100kv motors
reinforced arms and base
LED plates between arms in front and rear part (30x7 mm, e.g Diatone led for ZMR250 will fit this space)
thicker spacers
Froggy 150 is a micro 150 size FPV indoor/outdoor racing quad which is easy to print & build and very funny to fly due to its size and agileness. You can squeeze it through every hole :) It is designed to be one of the smallest and lightest frames that accommodate 3.5" propellers and standard size components like 1306 motors or CC3D atom flight controller board.
Here is a sample video from one of my flights to show that it really flies very good: https://www.youtube.com/watch?v=_XaYZakmYcA. It's capable to carry HD camera for recording like Mobius/Foxeer Legend or even Gopro/SJCam. We also do some indoor racing: https://www.youtube.com/watch?v=Qn6DaZgi6AA.
When printed in ABS with 100% infill it's also rigid and will survive many crashes.
Total frame weight is about 35 grams (ABS, 100% infill, M2 self-tapping screws), AUW with FPV gear and 3s lipo 500 mAh is about 200 grams.
My recommended setup:
motors: 4x 1306 3100kv (http://www.banggood.com/DYS-1306-3100KV-BX-Series-Brushless-Motor-For-Multicopter-CW-CCW-p-962149.html)
ESCs: 4x DYS SN16A (or similar size and amps) (http://www.banggood.com/ZTW-Spider-Series-18A-OPTO-ESC-With-SimonK-Oneshot-Program-p-983660.html)
flight controller: CC3D Atom (http://www.banggood.com/OpenPilot-CC3D-Atom-Mini-CC3D-FPV-Flight-Controller-CC3D-EVO-p-970762.html)
propeller: 3545 bullnose (buy 5030 and cut it to 3.5") (http://www.banggood.com/2-Pairs-Gemfan-3545-3_5X4_5-Inch-ABS-Propeller-Prop-CWCCW-For-Multicopter-p-1001334.html)
battery: 3S LiPo 500-900 mAh (http://hobbyking.com/hobbyking/store/__25505__ZIPPY_Compact_500mAh_3S_35C_Lipo_Pack.html)
FPV camera: mini PZ0420 (or Eachine700tvl) (http://www.banggood.com/Eachine-700TVL-2_6mm-Lens-1-3-CMOS-110-Degree-FPV-Mini-Camera-p-991027.html)
video TX: FT951 25mW (http://www.banggood.com/Eachine-ET25-5_8G-32CH-25mW-7-24V-Super-Light-Transmitter-p-991026.html, http://www.banggood.com/5_8G-Circular-Polarized-LHCP-Antenna-Short-SMA-RP-SMA-p-965219.html)
This 3S setup has very high power to weight ratio and flies really well even with HD cam.
Software:
BLHeli14.1 firmware for ESCs + Damped Light mode + Oneshot125
Cleanflight 1.10 Luxfloat controller PIDs:
roll/pitch: 2, 0.040, 30
yaw: 6, 0.040, 5
looptime: 1600
There is also a bigger version for 4" propellers (http://www.thingiverse.com/thing:1003801) and 5" propellers (http://www.thingiverse.com/thing:1069161).
Have fun!
fits 3.5" propellers, which seem to be the best for indoor quad with 1306 3100kv motors
reinforced arms and base
LED plates between arms in front and rear part (30x7 mm, e.g Diatone led for ZMR250 will fit this space)
thicker spacers
Froggy 150 is a micro 150 size FPV indoor/outdoor racing quad which is easy to print & build and very funny to fly due to its size and agileness. You can squeeze it through every hole :) It is designed to be one of the smallest and lightest frames that accommodate 3.5" propellers and standard size components like 1306 motors or CC3D atom flight controller board.
Here is a sample video from one of my flights to show that it really flies very good: https://www.youtube.com/watch?v=_XaYZakmYcA. It's capable to carry HD camera for recording like Mobius/Foxeer Legend or even Gopro/SJCam. We also do some indoor racing: https://www.youtube.com/watch?v=Qn6DaZgi6AA.
When printed in ABS with 100% infill it's also rigid and will survive many crashes.
Total frame weight is about 35 grams (ABS, 100% infill, M2 self-tapping screws), AUW with FPV gear and 3s lipo 500 mAh is about 200 grams.
My recommended setup:
motors: 4x 1306 3100kv (http://www.banggood.com/DYS-1306-3100KV-BX-Series-Brushless-Motor-For-Multicopter-CW-CCW-p-962149.html)
ESCs: 4x DYS SN16A (or similar size and amps) (http://www.banggood.com/ZTW-Spider-Series-18A-OPTO-ESC-With-SimonK-Oneshot-Program-p-983660.html)
flight controller: CC3D Atom (http://www.banggood.com/OpenPilot-CC3D-Atom-Mini-CC3D-FPV-Flight-Controller-CC3D-EVO-p-970762.html)
propeller: 3545 bullnose (buy 5030 and cut it to 3.5") (http://www.banggood.com/2-Pairs-Gemfan-3545-3_5X4_5-Inch-ABS-Propeller-Prop-CWCCW-For-Multicopter-p-1001334.html)
battery: 3S LiPo 500-900 mAh (http://hobbyking.com/hobbyking/store/__25505__ZIPPY_Compact_500mAh_3S_35C_Lipo_Pack.html)
FPV camera: mini PZ0420 (or Eachine700tvl) (http://www.banggood.com/Eachine-700TVL-2_6mm-Lens-1-3-CMOS-110-Degree-FPV-Mini-Camera-p-991027.html)
video TX: FT951 25mW (http://www.banggood.com/Eachine-ET25-5_8G-32CH-25mW-7-24V-Super-Light-Transmitter-p-991026.html, http://www.banggood.com/5_8G-Circular-Polarized-LHCP-Antenna-Short-SMA-RP-SMA-p-965219.html)
This 3S setup has very high power to weight ratio and flies really well even with HD cam.
Software:
BLHeli14.1 firmware for ESCs + Damped Light mode + Oneshot125
Cleanflight 1.10 Luxfloat controller PIDs:
roll/pitch: 2, 0.040, 30
yaw: 6, 0.040, 5
looptime: 1600
There is also a bigger version for 4" propellers (http://www.thingiverse.com/thing:1003801) and 5" propellers (http://www.thingiverse.com/thing:1069161).
Have fun!
Similar models
thingiverse
free
Red Dwarf 135/155 micro FPV Quadcopter by janmittner
...4x 1306 3100kv (http://www.banggood.com/dys-1306-3100kv-bx-series-brushless-motor-for-multicopter-cw-ccw-p-962149.html) escs: 4x dys sn16a (or similar size and amps) (http://www.banggood.com/ztw-spider-series-18a-opto-esc-with-simonk-oneshot-program-p-983660.html) flight controller: cc3d atom (http://www.banggood.com/openpilot-cc3d-atom-mini-cc3d-fpv-flight-controller-cc3d-evo-p-970762.html)...
thingiverse
free
Elite Bomber by ps915
... photo of your make.
this design is not for commercial use or selling!
unterstützte meine arbeit / support my work:
thanks! =)
thingiverse
free
yellow bee 160 copter racer by ZiegeOne
...306 3100kv motor cw/ccw
openpilot cc3d atom mini cc3d fpv flight controller
eachine et25 5.8g 32ch
gemfan 4x4,5 4045 propellers
thingiverse
free
V PRO STEF263 by Stef263
...r-fpv-p-980860.htmlhttp://www.banggood.com/fr/cc3d-flight-controller-5v-12v-bec-output-power-distribution-board-pcb-p-973352.html
thingiverse
free
FPV Micro 125 by Bongo_1st
...tps://www.banggood.com/eachine-flyingfrog-q90-micro-fpv-racing-quadcopter-spare-parts-micro-1000tvl-hd-coms-camera-p-1129846.html
thingiverse
free
F160tubz alum shafts by crysis_ps
...ragonfly 1306 3100kv motors
banggood small 170° camera
10-25mw video transmitter module
4040 bn propellers
3s battery 800-1000mah
thingiverse
free
FPV Nano 85 by Bongo_1st
...tenna: https://www.banggood.com/eachine-5_8g-3dbi-brass-antenna-omnidirectional-ipex-port-for-vtx01vtx02vtx03atx03-p-1147689.html
thingiverse
free
Flying Peach - 1407 by Babouch
...ir precious help and printing of the prototype
https://www.thingiverse.com/microdure/about
https://www.thingiverse.com/brax/about
thingiverse
free
Realacc KT100 canopy by _MFer_
...alntsc-p-984345.html
any 1103/1104/1105 motors
up to 65 mm propellers...
weight of canopy is about 4,5 grams when printed in abs.
thingiverse
free
Folding drone 300mm by Valsorimkubin
...it-6-dof10-dof-flight-controller-for-multicopter-p-1020774.html?rmmds=myorder
the bonnet will have to be done with a vacuum form.
Janmittner
thingiverse
free
QAV210 motor protector by janmittner
...qav210 motor protector by janmittner
thingiverse
i designed this light protector to save my cobra motors on qav 210.
thingiverse
free
QAV210 motor protector (rounded) by janmittner
...qav210 motor protector (rounded) by janmittner
thingiverse
i designed this light protector to save my cobra motors on qav 210.
thingiverse
free
BDX Racer FPV mini quad motor protector by janmittner
...bdx racer fpv mini quad motor protector by janmittner
thingiverse
simple motor guard for red20rc bdx racer
thingiverse
free
Johnybee180 FPV Quadcopter by janmittner. "SKY Version" by skydge
...actualización placa superior.
con xt60 macho y soporte para antena a 45º
special thanks to janmittner by those very good designs.
thingiverse
free
ZMR250 motor protector 2204 2206 2208 by janmittner
...50 has quite narrow arms, any 220x motor is not very well protected. so i created this motor protection to have the motors safer.
thingiverse
free
ZMR250 Low Rider modification by janmittner
...hardware:
2x 35mm spacer
6x 20mm spacer
2x 13mm spacer
of course you can change the height of spacers to adjust it to your needs.
thingiverse
free
SJ4000 - 20 degree tilted mount for FPV quadcopter by janmittner
... any fpv quad. simply attach the mount to the frame with double-sided tape, put the camera on it and wrap with some velcro strap.
thingiverse
free
Xiaomi Yi - 20 degree tilted mount for FPV quadcopter by janmittner
... any fpv quad. simply attach the mount to the frame with double-sided tape, put the camera on it and wrap with some velcro strap.
thingiverse
free
Rotorama Mefisto / Morfeus HD camera mount by janmittner
...er of the frame.
no supports or rafts needed, very easy to print. recommended to print with tpu but also abs or pla should work.
thingiverse
free
Johnybee180 FPV Quadcopter by janmittner
...ttp://www.thingiverse.com/thing:1069161) and smaller for 3" propellers (http://www.thingiverse.com/thing:1091279).
have fun!
Froggy
turbosquid
$25
Froggy
...id
royalty free 3d model froggy for download as fbx and gltf on turbosquid: 3d models for games, architecture, videos. (1691687)
3d_export
free
Froggy
...froggy
3dexport
3ddd
$1
Lucide FROGGY 77272-03-85
...roggy
артикул - 77272/03/85
цвет - зеленый
цоколь - e14
длина см - 71
ширина см - 21
высота см - 15,5
арматура - металл, зеленый
3ddd
$1
Горшок детский Fisher-Price Froggy Potty
...fisher-price froggy potty
3ddd
горшок , лягушка
горшок детский fisher-price froggy potty
turbosquid
$15
Lucide Froggy 77272-03-85
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Sconce 3D Model
...sconce 3d model archive3d sconce lamp-bracket lantern sconce lucide froggy n150217 - 3d model (*.gsm+*.3ds) for interior 3d...
thingiverse
free
froggy by caractere
...froggy by caractere
thingiverse
froggy
thingiverse
free
Froggy by Gustafson_k
...froggy by gustafson_k
thingiverse
rainforest cafe frog
unity_asset_store
$5
Froggy Chairs
... your workflow with the froggy chairs asset from meowvorty. find this & other furniture options on the unity asset store.
thingiverse
free
Froggy Chair by ZachHanze
...froggy chair by zachhanze
thingiverse
the froggiest chair.
Racer
3ddd
$1
CILEK (Racer)
...cilek (racer)
3ddd
cilek
набор детской мебели cilek (серия racer)http://www.cilek.com/ru/sl-racer
turbosquid
$36
racer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Lego Racers
...lego , racers , конструктор
8667 action wheelie
turbosquid
$80
RACER 7
...turbosquid
royalty free 3d model racer 7 for download as c4d on turbosquid: 3d models for games, architecture, videos. (1417228)
turbosquid
$80
RACER 9
...turbosquid
royalty free 3d model racer 9 for download as c4d on turbosquid: 3d models for games, architecture, videos. (1417297)
turbosquid
$80
RACER 8
...turbosquid
royalty free 3d model racer 8 for download as c4d on turbosquid: 3d models for games, architecture, videos. (1415462)
turbosquid
$8
Spacecraft Racer
...d
royalty free 3d model spacecraft racer for download as fbx on turbosquid: 3d models for games, architecture, videos. (1298320)
turbosquid
$20
Pod Racer
...
royalty free 3d model pod racer for download as jpg and fbx on turbosquid: 3d models for games, architecture, videos. (1156525)
turbosquid
$59
Spaceship Racer
...ty free 3d model space craft racer for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1408093)
turbosquid
$80
lego Racer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.
150
3ddd
$1
МООН 150
...моон 150
3ddd
moon
модель 150
3d_export
$5
f 150
...f 150
3dexport
f 150 formats max 3ds obj stl
3ddd
free
Тема 150
... акватика , ванна , угловая
ванна тема 150
design_connected
$11
Bolero 150
...bolero 150
designconnected
bolero 150 computer generated 3d model. designed by lazzeroni, roberto.
turbosquid
$25
Earrings 150
...alty free 3d model earrings 150 for download as stl and sldpr on turbosquid: 3d models for games, architecture, videos. (1203665)
turbosquid
$25
Ring 150
...royalty free 3d model ring 150 for download as stl and sldpr on turbosquid: 3d models for games, architecture, videos. (1203661)
turbosquid
$15
Cornice 150
...y free 3d model cornice 150 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1537239)
turbosquid
$15
Curtain 150
...e 3d model curtain 150 for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1707882)
turbosquid
$15
TZ-150
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Table 150
...d model table 150 for download as max, max, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1592365)
Micro
3ddd
$1
Micro
...micro
3ddd
автобус
turbosquid
$80
MICRO
...ty free 3d model micro for download as max, c4d, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1700743)
3ddd
$1
JBL Micro Wireless
... micro , колонка , плеер
jbl micro wireless
turbosquid
$10
Suppressor Micro
...quid
royalty free 3d model suppressor micro for download as on turbosquid: 3d models for games, architecture, videos. (1380433)
turbosquid
$20
Micro Meter
...osquid
royalty free 3d model micro meter for download as fbx on turbosquid: 3d models for games, architecture, videos. (1350448)
turbosquid
$7
NIghtstand Micro
...d
royalty free 3d model nightstand micro for download as max on turbosquid: 3d models for games, architecture, videos. (1248117)
3ddd
$1
Micro wind turbine
...micro wind turbine
3ddd
турбина
micro wind turbine for your green building projects
turbosquid
$29
Micro Speakers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Micro Servo.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Micro cells
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.