Thingiverse
Frnkendrone by erniepike
by Thingiverse
Last crawled date: 3 years ago
This is a mashup of two cheap drones with the addition of some 8mm carbon tube (hunting arrow shaft)
I had a HS110 drone (Syma X5C RC knock off) that had spent some time in a tree due to a bad barometer. and a F36 (Eachine 010) with a broken frame. Initially I replaced the flight controller from the HS110 with the one from the F36. After more learning to fly that frame was finished so I built this.
I had a HS110 drone (Syma X5C RC knock off) that had spent some time in a tree due to a bad barometer. and a F36 (Eachine 010) with a broken frame. Initially I replaced the flight controller from the HS110 with the one from the F36. After more learning to fly that frame was finished so I built this.
Similar models
thingiverse
free
Racer Frame Eachine E010 - JJRC H36 - FuriBee F36 by Portalintec
... racer frame to this mini drones,
print in 2mm 50% infill
i use the original case for the batery.
3-3-2018 edit
added new design.
thingiverse
free
SPACE OPNE GALAXY FPV FREESTYLE AND RACING DRONE by KaTZWorld
...ount that had the strap tethered in
only had the drone frame few a few days and i will be working up some more parts for it soon
thingiverse
free
Whoop / F36 / H36 - Case middle remix for frame support by XXXMan
...hing.
i included only the middle part, you can download other parts from original thing.https://www.thingiverse.com/thing:2795264
grabcad
free
S500 sprayer drone
...dified s500 drone for spraying. thanks to velimir at https://grabcad.com/library/s500-frame-1. i got some parts from his assembly
grabcad
free
Agriculture Drone - Concept Design
...ient few months ago, so i thought i would just model it and see how it comes up.
would love to get some nice inputs from you. :)
thingiverse
free
Rbird DMS240 to F330 conversion by gastontheroad
...mount dji phantom propellers you will need some m3 screws and double-sided tape. i removed the leds from the arms and the switch.
grabcad
free
drone frame with some component
...drone frame with some component
grabcad
lidar, fan, frame, battery, arm of drone are attached.
thingiverse
free
Drone Stand 10° by Woodbird
...hingiverse
drone stand for ak47 frame (fpv drone)
tilt : 10 degrees
i recommand to use some glue to consolidate the two parts ;)
grabcad
free
RED-SPY
...nd user free and this model can be manufacture with minimal cost and which the frame protecting fan from some colloidal accident.
thingiverse
free
2s to 1s Battery Adapter by DaSummit
...t that it was meant to hold 2s batteries. this was my solution.
this is my first upload so please leave feedback! happy flying :)
Erniepike
thingiverse
free
Belt clip by erniepike
...belt clip by erniepike
thingiverse
belt clip thing.
thingiverse
free
DoorKnob by erniepike
...to adjust the size of the hole in the rose, every printer is different. this is for the type of latch that has a crescent action.
thingiverse
free
Phone holder by erniepike
...phone holder by erniepike
thingiverse
cellphone holder for desk and dash. this works with my lgl62vl (5.3")
thingiverse
free
Micro Quad Box by erniepike
...micro quad box by erniepike
thingiverse
storage / transport box for micro drons
thingiverse
free
meter holder by erniepike
...a multimeter and probes on a wall.
i actually put them on the edge of a shelf, the thicker/ solid back ones work better for that.
thingiverse
free
PIKE Crest by erniepike
...r by john pike in 1635, adopted by the pike family association in 1902. this the just the shield, the entire coa is more complex.
thingiverse
free
32mm deck by erniepike
...acers.
print the "32mm deck #2" straps on edge to avoid long bridging and layer separation
actual hole spacing is 30.5.
thingiverse
free
32 tooth mini lathe gear by erniepike
...32 tooth mini lathe gear by erniepike
thingiverse
32 tooth gear for mini lathe change gears.
thingiverse
free
adjustable desk crank by erniepike
... has these desks, the handles are probably missing. not any more. i've made several from pla work fine, abs should be better.
thingiverse
free
Tiny Quad Box by erniepike
...kong q25 5.8g 25mw 16ch micro av transmitter with 600tvl camera.
modified lid to make room for antenna without tucking it inside.