GrabCAD
Fresh water fog challenge - 01 - Telespar frame
by GrabCAD
Last crawled date: 1 year, 12 months ago
A simple structure using Telespar square tube.
Can bolt together at any point along the tube, so quite versatile in uneven ground, or if you need to bolt on additional things later on. (solar panel, sensor, guylines )
Fog Mesh is folded over and sandwiched between stainless strips at the top and bottom. Spring tension keeps it taught.
Mesh and strip set-up can be done offsite, then rolled up for easy transport. Mesh length is not critical as the anchor points can easily be changed.
Bottom of the mesh is well below the water guttering level, so less water lost with high winds. (gutter rendered transparent green for clarity)
Easy to remove the water gutter to clean the leaf filter, quick release nut (not shown)
Easy to assemble, (can do it horizontal, then raise )
Needs no special tools.
Long tubes split in the middle for easy transport.
Lots of common bases for Telespar tubing, for concrete, gravel, loose soil etc.
Galvanized for outdoor use and all within 70mph wind load limits for that size mesh.
The wire on the top is to stop birds roosting.
Can bolt together at any point along the tube, so quite versatile in uneven ground, or if you need to bolt on additional things later on. (solar panel, sensor, guylines )
Fog Mesh is folded over and sandwiched between stainless strips at the top and bottom. Spring tension keeps it taught.
Mesh and strip set-up can be done offsite, then rolled up for easy transport. Mesh length is not critical as the anchor points can easily be changed.
Bottom of the mesh is well below the water guttering level, so less water lost with high winds. (gutter rendered transparent green for clarity)
Easy to remove the water gutter to clean the leaf filter, quick release nut (not shown)
Easy to assemble, (can do it horizontal, then raise )
Needs no special tools.
Long tubes split in the middle for easy transport.
Lots of common bases for Telespar tubing, for concrete, gravel, loose soil etc.
Galvanized for outdoor use and all within 70mph wind load limits for that size mesh.
The wire on the top is to stop birds roosting.
Similar models
grabcad
free
Water collecting device
...s posible to use telescopic perfored tubes, telespar,telestrut, etc . water fog net is easy for setup and compact for transport.
grabcad
free
Compact Fog net Mesh Collector
...a minimum of cost and time to build.
challenge result : https://grabcad.com/challenges/the-fresh-water-fog-nets-challenge/results
grabcad
free
The Fresh Water Fog Nets Challenge
...be secured to the ground with a screw and extra sandbags for increased stability. this same principle applies to the tripod legs.
grabcad
free
Tube bracket for fog collectors
...uce the mass thanks to solid edge 10)
• cheap, it can be used in remote and poor areas
• the obtained water is suitable for drink
thingiverse
free
Fog Harvester Prototypes for Wind Tunnel Testing (Curved) by lulucia
...arts can be used to construct prototypes of curved fog harvesting devices to do experiments concerning the water collection rate.
grabcad
free
INFLATABLE FOG NET
...le frame is a simple purchased parts, just need a little modification. the iglu shape is perfect to resist up to 70 mls/hrs wind.
thingiverse
free
Fog Harvester Prototypes for Wind Tunnel Testing by lulucia
...ypes for wind tunnel testing by lulucia
thingiverse
these prototypes can be used for wind tunnel experiments of fog harvesters.
grabcad
free
Fog/dew collector
...ate some type of energy to pump water to other places like to a home. so this way someone does not have to come up and get water.
grabcad
free
High Capacity Fog Collector
...es several iterations to achieve a manufactuablity status. thank you, hope you understand my design intent.
good luck to all!!!
thingiverse
free
Bowden tube mount or holder by sveske
..., with room for zipties.
the 2 bolt holes for 5mm bolts, is so i can mount it to 20x20 extruded nut.
seems to work like i planed.
Telespar
grabcad
free
Water collecting device
...changes it is posible to use telescopic perfored tubes, telespartelestrut, etc . water fog net is easy for setup...
grabcad
free
Fog Net - Joshua Chung
...ideas https://www.youtube.com/watch?v=4gctjkktnbi post part options http://www.s-squaretube.com/portals/0/documents/techspec/squarepost_productspecs-data_112513.pdf post anchor options http://www.atc-mechanical.com/telesparbrochure/#?page=6 i would try to avoid the one that needs...
3dwarehouse
free
4-foot, 2-inch, 12-guage telespar
...ojects involving perforated tubular square metal, especially grid beam building #fencepost #galvanized_steel #grid_beam #telespar
3dwarehouse
free
2 Inch Grid Beam Sticks - Large Set A
...in the grid beam book. #framing #grid_beam #gridbeam #modular_building #telespar ...
3dwarehouse
free
2 Inch Grid Beam Sticks - Small Set
...in the grid beam book. #framing #grid_beam #gridbeam #modular_building #telespar ...
3dwarehouse
free
2 Inch Grid Beam Sticks - Large Set B
...in the grid beam book. #framing #grid_beam #gridbeam #modular_building #telespar ...
Fog
3ddd
$1
fog light
...fog light
3ddd
fog
fog light model with chain, no light bulb,
turbosquid
$20
In-the-fog
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$27
Fog Kendall Sofa
...fog kendall sofa
designconnected
fog kendall sofa computer generated 3d model.
3ddd
$1
Полки In the Fog
... корпус каждого предмета мебели изготовлен из листового металла. а эффект «растворения» в воздухе создается с помощью перфорации.
3ddd
$1
Morosini Fog Plisse
...morosini fog plisse
3ddd
morosini
светильники fog plisse из италии фабрики morosini. цвета: белый, черный, слоновая кость, мокко
3ddd
$1
FOG panel
...fog panel
3ddd
панель
гипсовая панель модели fog1.
фри по желанию автора
3d_export
$18
poison fog forestevil buddhagold iron buddha
...
poison fog forest_evil buddha_gold iron buddha<br>max 2015 v-ray 3 max 2015<br>textures<br>all files in zip...
3ddd
$1
Гипсовая 3d панель Fog от Artpole
...ль fog от artpole
3ddd
панель
официальная модель от компании artpole.
производитель № 1 гипсовых панелей в россии.
www.artpole.ru
3d_ocean
$25
HDRI spherical sky panorama -0805- fog & mist
...r morning with a beautiful light play and magical colour shades (time: 08:05). this is a very rare real fog scenario with a mi...
3ddd
$1
Restoration Hardware/Linen Office Storage Accessories Fog
...х76h
small hanging file box:w330х180dх280h
large hanging file box:w405х180dх280h
в архиве присутствует 2010, 2012 версий 3ds max
Fresh
design_connected
$27
Fresh Peonies
...fresh peonies
designconnected
fresh peonies computer generated 3d model.
3ddd
$1
Fresh Futon
...fresh futon
3ddd
edge natural with natural frame
fresh futon
turbosquid
$2
Fresh Bananas
...id
royalty free 3d model fresh bananas for download as blend on turbosquid: 3d models for games, architecture, videos. (1523143)
3ddd
$1
Raw fresh fish
...raw fresh fish
3ddd
рыба
this is a fresh raw fish
turbosquid
$20
Fresh zombie
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Edelform Fresh 80
...fresh 80
3ddd
edelform , fresh
тумба с раковиной: 450x780x55
шкаф-колонка : 350x1800x320
3d_export
$8
fresh chicken leg
...fresh chicken leg
3dexport
3d_export
$7
fresh bread
...e file contains 21,131 vertices. pbr textures. albedo, normal, ao, bump, diffuseness, glossiness, height, roughness, specularity.
turbosquid
free
fresh juicy grapes
...
royalty free 3d model fresh juicy grapes for download as max on turbosquid: 3d models for games, architecture, videos. (1436144)
3d_export
$7
living room fresh
...living room fresh
3dexport
sitting room
Challenge
turbosquid
$120
Challenger 2 and challenger 2 TES
...e 3d model challenger 2 and challenger 2 tes for download as on turbosquid: 3d models for games, architecture, videos. (1430319)
3d_export
$59
dodge challenger srt8
...dodge challenger srt8
3dexport
dodge challenger srt8
3d_export
$20
dodge challenger 1970
...dodge challenger 1970
3dexport
dodge challenger 1970
3d_export
$15
Dodge Challenger Hellcat
...dodge challenger hellcat
3dexport
dodge challenger hellcat
turbosquid
$80
challenger-2
...rbosquid
royalty free 3d model challenger-2 for download as on turbosquid: 3d models for games, architecture, videos. (1498848)
3d_export
$5
dodge challenger car
...dodge challenger car
3dexport
3d model dodge challenger!
turbosquid
$99
Dodge Challenger
...
royalty free 3d model dodge challenger for download as blend on turbosquid: 3d models for games, architecture, videos. (1489358)
turbosquid
$49
Dodge Challenger
...
royalty free 3d model dodge challenger for download as blend on turbosquid: 3d models for games, architecture, videos. (1698375)
turbosquid
$10
dodge challenger
...
royalty free 3d model dodge challenger for download as blend on turbosquid: 3d models for games, architecture, videos. (1405948)
3d_export
free
dodge challenger srt8
...dodge challenger srt8
3dexport
dodge challenger srt8 free model
01
3d_export
$5
cup 01
...cup 01
3dexport
cup 01
3ddd
$1
01
...01
3ddd
kartina
turbosquid
$6
Dry Stone Wall 01 01
... model dry stone wall 01 01 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1713793)
design_connected
free
Stool 01
...stool 01
designconnected
free 3d model of stool 01
turbosquid
$10
New York skyscraper #01-01
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
dustbin 01 trash can 01
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
01
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$13
Barstool 01
...barstool 01
designconnected
barstool 01 computer generated 3d model.
design_connected
$11
Vases 01
...vases 01
designconnected
vases 01 computer generated 3d model.
evermotion
$20
Male 01 3dpeople vol 01
... poses highly detailed and shadered model of human body. every model is shadered and ready to render.. evermotion 3d models shop.
Water
turbosquid
$2
water bin water tank
...e 3d model water bin water tank for download as blend and obj on turbosquid: 3d models for games, architecture, videos. (1594026)
archibase_planet
free
Water purifier
... purifier water purification water treatment
water purifier n050914 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
3d_ocean
$6
glass water
...glass water
3docean
clear glass glass water
glass filled with water
3ddd
$1
Watering pot
...watering pot
3ddd
watering pot лейка поливалка , лейка
watering pot
3d_ocean
$12
Water Dispenser
...dispenser furnishings lowpoly water
this is a water dispenser hot water for tea is winter and summer is cold for souls. have fun!
3d_ocean
$2
Water
...water
3docean
this is a tile able, hand painted water texture tile. included is one versions at 512×512 pixels in .tga format.
3d_export
$6
water tanker
...water tanker
3dexport
water tanker
3d_export
$6
water bottle
...water bottle
3dexport
water bottle
3d_export
$5
water bottle
...water bottle
3dexport
water bottle
3d_export
$5
water thermos
...water thermos
3dexport
water thermos
Frame
archibase_planet
free
Frame
...frame
archibase planet
frame photo frame
frame n190813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame photo frame
frame n071113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Frame
...frame
3ddd
frame
3ddd
free
Frame
...frame
3ddd
frame
archibase_planet
free
Frame
...frame
archibase planet
frame mirror frame ornament
frame n260113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame photo frame
frame photo n190813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame window window frame
frame 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame window frame window
frame 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame wall frame decoration
frame 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame window window frame
frame 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.