Thingiverse
FreeCAD Gears by rockpaperlizardspock
by Thingiverse
Last crawled date: 4 years, 2 months ago
Not a model for anything in particular, nor is it meant for directly printing, but just an easy way to make gears.
Contains a spreadsheet where you can enter the number of teeth you want, how far apart the gears are, and how thick they should be.
Holes for shafts and keyways can then be made using sketches and cut out of the gears.
Made with FreeCAD 0.17 (build 12643), may not work with other/earlier versions.
Ignore the STL file, thingiverse apparently wants some sort of model file for the thing to be valid and doesn't recognise FreeCAD files as being valid design files.
DISCRIMINATION@!$ Come on thingiverse, FreeCAD has been around forever. Get it together.
Contains a spreadsheet where you can enter the number of teeth you want, how far apart the gears are, and how thick they should be.
Holes for shafts and keyways can then be made using sketches and cut out of the gears.
Made with FreeCAD 0.17 (build 12643), may not work with other/earlier versions.
Ignore the STL file, thingiverse apparently wants some sort of model file for the thing to be valid and doesn't recognise FreeCAD files as being valid design files.
DISCRIMINATION@!$ Come on thingiverse, FreeCAD has been around forever. Get it together.