Frame hanger by Raptr117

... paintings impossible. this hook is designed to stick to the painting side of the command strip and hook onto any frame hardware.

...o be mounted using command strip for picture frame. there is cut-out on the back that command strip goes into to be mounted flat.

...e hook to hang ikea ribba picture frames with 3m command adhesive strips. have used medium and large sized strips successfully.

...ds it to the window, which is much easier to manage. tinkercad model is available at https://www.tinkercad.com/things/i00umo2zs22

...3m command strip shelf by jeremyg58 thingiverse this is a simple shelf that uses large 3m command strips to hang.

... a t5 light bar with command strips. the mount slides over the light bar and then can be mounted to the wall using command strips

...holes. my panel pins were 2mm diameter and 1.5mm holes worked fine, i made the holes 3-5mm shallower than the length of the pins.

...command hook by pahe1004 thingiverse hook made for command strips

... hook by stonequest4551 thingiverse this hook is designed for large frames, to be used with the strips which support up to 4 lb.

...strips-20-strips-17022-es/dp/b000fdlfbk/ref=sr_1_3?ie=utf8&qid=1531313370&sr=8-3&keywords=command+small+refill+strips

...dy. it's based on the one in gundam dynames in gundam 00. it has a 10mm square at the bottom if you want to mount it somehow.

... made because i had a spare m.2 ssd that i don't use all the time (from a dead pc), and i wanted something cool to put it in.

...mall, prints in under half an hour, but should securely hold onto the hot wheels and the bar. inner dimensions of top hook: 7.5mm

...ference between the scifi knife and this one, for some reason i cannot see the scifi knife in my designs so i just reuploaded it.

...t much sturdier and a little easier to grab as well, so i recommend thickening the one part knife to about 22mm if you upsize it.

...he holes, that is if you make it at 100% scale. the holes are much too small and would only work if you drilled into the plastic.

...hanger 3dexport hanger

...hanger archibase planet hanger coat hanger holder hanger n260612 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...hanger archibase planet hanger rack hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...hanger 3dexport old-fashioned hanger of georgia

...hanger 3ddd вешалка classic black hanger

...hanger archibase planet hanger hall-stand rack hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...hanger archibase planet hanger rack peg hanger n210712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...hanger archibase planet hanger rack sanitary ware hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...hanger archibase planet hall-stand rack hanger hanger n250711 - 3d model (*.3ds) for interior 3d visualization.

...hanger archibase planet hanger hall-stand rack hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...frame archibase planet frame photo frame frame n190813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...frame archibase planet frame photo frame frame n071113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...frame 3ddd frame

...frame 3ddd frame

...frame archibase planet frame mirror frame ornament frame n260113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...frame archibase planet frame photo frame frame photo n190813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...frame archibase planet frame window window frame frame 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...frame archibase planet frame window frame window frame 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...frame archibase planet frame wall frame decoration frame 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...frame archibase planet frame window window frame frame 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.