FR7 v5.x Frame Cut Files

Last crawled date: 4 years, 3 months ago

NOT FOR COMMERCIAL USE
FR7 v5 - Hero8 Bi Blade Raw, No Hypersmoothhttps://www.youtube.com/watch?v=zzgDLzRcTTE
Frame and prints soon to be available at AirbladeUAV!
Link to v4https://www.airbladeuav.com/products/fr7-7-inch-long-range-frame-kit?_pos=1&_sid=c22726d74&_ss=r
FR7 v5.x Frame Files
Only the latest and greatest cut files will be posted. Old files will be removed.
Two sets of cut files can be found in the files section:
v5: Latest and greatest, Hero 8, Hero 7, and Session 5 Superview compatible.
v5 OG: OG/v4 arm shape and Front/Top plate lengths, Hero 7 and Session 5
Superview compatible.

Changes:
v5 is roughly 50 grams lighter (carbon) than the v4 frame.
Arms narrowed down, arm ends reshaped, lightening cutouts added at plate
interface.
Rear plate has incorporated the lessons learned from the FRH design.
Front and Top Plate lengths have been increased by 12mm in order to accommodate
the Hero 8 Superview FOV, eliminating props from view. Plates are still compatible
with v4 prints.
Added a second set of rear standoffs.
Updates rear plate geometry (created flats) to accommodate a battery strap running
under the stack.
Rear lower battery strap slot moved fwd in order to eliminate routing issues when
using the rear stack.
Backwards compatible with v4 arms.
Backwards compatible with all v4 prints with the exception of the arm ends and skids,
unless using the OG v5 arms.

7" Arms
No Props In View, No Cropping Required
Recommended Plate Thicknesses:
Front Plate: 2.5mm
Rear Plate: 2.0mm
Top Plate: 2.0mm
Front Arm: 6mm
Rear Arm: 6mm
Hardware BOM:
Description; Qty; Notes
3mm Standoff, Round (5mm OD), 10mm; 2; Front
3mm Standoff, Round (5mm OD), 20mm; 2; Rear
3mm Standoff, Round (5mm OD), 28mm; 2; Cam Uprights
3mm Standoff, Round (5mm OD), 30mm; 2; HD Camera Holder
Button Head Screw, M3 x 5; 2; Front Standoffs
Button Head Screw, M3 x 8; 14; Standoffs
Button Head Screw, M3 x 12; 8; Arms (may opt to use a single washer at the center clamp fastener in order to ensure stack clearance.
3mm Press Nuts; 9; https://www.mcmaster.com/94100a110 or equivalent
3D Print files: https://www.thingiverse.com/thing:3601947