FPV Racer Frame (~200 Doubledecker) Quadrocopter by headsho111

Last crawled date: 3 years ago

Hello,
I created a frame which I could print on a 200x200mm printer bed.
This frame has a mount for a 30x30mm FC and a 30x30mm PDB.
Underneath you can assemble a receiver and FPV transmitter perfectly. On top there is enough space for the battery.
A mounting place for a cam is there as well.
The ESCs are hidden under the arms and like this, a pretty nice build emerges.
For the feet I chose a pretty easy solution and you need some clue to fixate them. I think about another solution. I will add a motor protection later on.
For the assembly you need somer spacers. I bought this amazon set: https://www.amazon.de/INIBUD-Abstandhalter-Schrauben-Muttern-Schwarz/dp/B01CG9KATS/ref=sr_1_1?s=diy&ie=UTF8&qid=1481625564&sr=1-1&keywords=INIBUD+180+Stk+M3+Nylon+Hex+Abstandhalter+Schrauben+Muttern+Kit+Schwarz+Drohn
//EDIT:
I had a first flight (and a second) and I am pretty new to FPV, so I had a rather rough landing (you could say crash) and instantly found some weak points of the construction. I will rework it and bring a new version with 4 seperate arms to assemble, and reinforced arms etc.
The feet are rather bad positioned... because of the lever between the weight and the contact point to the ground. I will rework this as well.
Have a good print
Carsten