Thingiverse
FPV Quadcopter - Tinycopter95, SciSky FlightController, 8,5mm Motors by Drese
by Thingiverse
Last crawled date: 3 years, 1 month ago
This frame was inspired by the Micro 105 FPV Quadcopter by punkkills - http://www.thingiverse.com/thing:1221911. I am using the same components (flightcontroller, videoTX, camera, similar motors). My intension was, to have the camera tiltable before flight, so I can adjust it upwards for fast forward flight and straight or even downwards, if I am flying indors.
The size is 95mm and the overall weight is ~54g with battery (~32g without). The frame itself (including the caps to protect the motor wires) is less than 6g (ABS).
I have tried to save weight and make mounting / dismounting easier by using snap-joints
The Flight Controller and the TX snap to their Frames, Camera slides into the mounting and will be snapped in the frame, frame parts snap together...
As every 3D printer has different tolerances, this might need some tweaking.
The size is 95mm and the overall weight is ~54g with battery (~32g without). The frame itself (including the caps to protect the motor wires) is less than 6g (ABS).
I have tried to save weight and make mounting / dismounting easier by using snap-joints
The Flight Controller and the TX snap to their Frames, Camera slides into the mounting and will be snapped in the frame, frame parts snap together...
As every 3D printer has different tolerances, this might need some tweaking.
Similar models
thingiverse
free
FPV Mini Quadcopter SciSky Brushed FlightController by rmorrow50
...i am using the same components (flightcontroller, videotx, camera, similar motors). my intension was, to have the camera tiltable...
thingiverse
free
Micro FPV Quadcopter Mash-up by Ralex02
...re to show how they will fit.
i haven't been able to print it out yet, but i attached a picture of my current fpv setup! lol
thingiverse
free
T4 Quadcopter fpv camera mount by moose4621
...sing the existing mounting hole available when the gopro mount is also in use.
this allows fpv flights with or without the gopro.
thingiverse
free
Multirotor flightcontroller adapter 45mm to 30mm (NanoWii, Naze32 etc.) by Nilz
...t have 30mm spacing and the naze32 version is for 30.5mm spacing.
if there is interest i will try to make a customizer version.
thingiverse
free
Minimal frame for 65mm props and 8.5mm motors by KevinKuwata
...e the mass to be roughly 11 grams. which is a 40% weight reduction from my other fpv microquad frame. i will update with results.
thingiverse
free
S3 Pattycake FPV Hovercraft / Tiny Whoov by nickleyw
...e... this will keep your s3 pattycake from spinning out of control
piloting:
use your throttle/yaw stick for everything!
enjoy :p
thingiverse
free
Skitzo quadcopter flight camera mount guard bumper by PointDeckster
...with the runcam swift, but should work with most similar cameras to the...
thingiverse
free
DroSign - Quadcopter by MakerHenry
... 65 mm (smaller ones will also work e.g. 60 mm)
fpv camera: eachine tx03 /tx01
receiver: fr.sky
thingiverse
free
DroSign - Quadcopter by MakerHenry
... 65 mm (smaller ones will also work e.g. 60 mm)
fpv camera: eachine tx03 /tx01
receiver: fr.sky
thingiverse
free
FPV250 Quadcopter Camera Mount by Sdconnell
...fpv250 quadcopter camera mount by sdconnell
thingiverse
camera mount for the hobby king fpv 250 quadcopter frame.
Tinycopter95
thingiverse
free
FPV Quadcopter - Tinycopter95 Remix (stronger frame) by punyviking
...strengthening so the standoffs doesn'n break off as easy.
also printed a new frame out of carbonfibre pla, feels unbreakable!
thingiverse
free
SOSx Micro X V3 Banggood Camera Mount by maxdefeijter
...by maxdefeijter thingiverse based on the mount on the tinycopter95 (http://www.thingiverse.com/thing:1307116) by drese. by the way, man, i love...
Drese
archive3d
free
Dresing table 3D Model
...g table dresser table
dresing table s n150412 - 3d model (*.3ds) for interior 3d visualization.
thingiverse
free
Revell Control GLOWEE Landing Skids by Drese
...ct on the flight characteristics.
depending on the tolerances of your 3d printer, the holes need to be drilled to fit the screws.
thingiverse
free
Diff Outdrive Tunigy 118B Stadium Truck by Drese
...will make them even stronger
this version works fine, if i makle it on my 3d printer - needs maybe some customizations on yours?!
thingiverse
free
SOSx Micro X V3 Banggood Camera Mount by maxdefeijter
...based on the mount on the tinycopter95 (http://www.thingiverse.com/thing:1307116) by drese by the way, man, i love your camera mount...
sketchfab
$10
Victorian Dressing Table
...some feedback. i hope that it will be of a good use to you. - victorian dressing table - buy royalty free 3d model by mattruszala
thingiverse
free
FPV Quadcopter - Tinycopter95 Remix (stronger frame) by punyviking
...remix/modification of the very nice quadcopter frame from user drese i have made the frame a lot stronger than...
grabcad
free
Dresing table
...dresing table
grabcad
dresing table
cg_trader
$7
Dresing table with mirror
...cg trader
dresing table
cosmetic cabinet asset.
super for archvizz or games.
game ready model with taxtures.
blender 2.9 modeled
cg_trader
$6
Dresing table with seat
...
dresing table with seat
cosmetic cabinet asset.
super for archvizz or games.
game ready model with taxtures.
blender 2.9 modeled
Scisky
thingiverse
free
Micro Scisky Board by kolergy
...micro scisky board by kolergy
thingiverse
open scad model of the naze32 based micro scisky board
thingiverse
free
Micro Scisky FPV Quad by gibo
...d based on naze32 for multirotor)
motors: 8520 coreless motors.
prop: 75mm (0.97motor shaft id).
battery: 3.7 850mah 1s battery
thingiverse
free
Scisky plate for Rolling Spider by magictex
...ix a scisky flight controller on a parrot rolling spider frame.
for mode details, please visit www.texfpv.com (in french, sorry).
thingiverse
free
110 quad 8.5 scisky board by hkrug
...0 quad 8.5 scisky board by hkrug
thingiverse
simple frame to hold 8.5 brushed motors and scisky/quanum pico fc. weighs about 5g.
thingiverse
free
eachine e010 scisky tx01 by yoannwyffels
...versions less weight
adding "elevator" to rise up a little bit scisky mount and avoid any interferences with propellers
thingiverse
free
Quanum pico (SciSky board) Cover by ixxe
... to fit smaller x shaped frames. use adhesive tejp to stick it to frame.
top cover is somewhat tight to keep it holding together.
thingiverse
free
Scisky Case (Mounting Plate and Cover) by BrainFever
...commercial frame.
there are two versions... the regular plate and cover as well as a "lightened" version of both parts.
thingiverse
free
Y4 micro scisky 7mm motors multi rotor experimental by Braaping_Pirate
... pusher on the rear motor counter rotating
motors are 7mm
designed to use the scisky board
and fx798t cam
model is glued together
thingiverse
free
Scisky 32bits Brushed Flight Control case by Ipoc78
...2bits brushed flight control case by ipoc78
thingiverse
i need a way to mount the little fc, so i came put with this, works well
thingiverse
free
FunQ Mini FPV Quad - Quanum Pico / Scisky 32 by m4RT1n
...ponents yet to try it out so stay tuned for updates :)
have fun...
if you like it please follow me or/and give it a like :) , thx
Flightcontroller
thingiverse
free
Adapterboard for naze32 flightcontroller by bitfex
...holes at 30,5 mm, like cc3d, naze32, mini kk, mini apm and other.
it adapts 30.5mm flightcontroller mounts to 45mm frame mounts.
thingiverse
free
cover plates for flightcontroller stack by jubidev
...plates for flightcontroller stack by jubidev
thingiverse
a little basic cover plate for 30.5mm * 30.5mm flightcontroller stacks.
thingiverse
free
flightcontrol - adapterplate by maulwurfpauli
...flightcontrol - adapterplate by maulwurfpauli
thingiverse
45mm adapterplate for sticked flight controls
material thickness 1.0mm
thingiverse
free
Standoff for F3 Flightcontroller case by NitzscheModellbau
... a capacitor on the bottom side of the board for protection. the case i use is this one: http://www.thingiverse.com/thing:1363351
thingiverse
free
20x20mm to 30x30mm Flightcontroller Adapter for CherryCraft Sprout Frame by cherrywalter
...adapter is screwed on the flightcontroller with countersunk screws and then stacked into the 20x20mm mounting holes in the frame.
thingiverse
free
20x20 Flightcontroller Mount by Scavanger
...nt by scavanger
thingiverse
super simple 20x20mm fc mont.
i use it for the whitenoise nano mounting board in my zohd dart 250g.
thingiverse
free
Flightcontroller FC Softmount TPU by replikateur
...plikateur
thingiverse
print in flexible filament
should be self explanatory, comment if something is unclear
have fun with it :)
thingiverse
free
Omnibus F4 V3 Pro housing for flightcontroller by mrtv
...d foam tape.
the design can be easyly adapted to any 36x36 fc with 30,5mm hole spacing.
let me know if it works or not. have fun.
thingiverse
free
Removable Flightcontroller mount by AnandNL
...ou can remove the fc tray and leave the mount in the model.
the screws are m3. the holes in the mount are for hot glue mounting.
thingiverse
free
Multirotor flightcontroller adapter 45mm to 30mm (NanoWii, Naze32 etc.) by Nilz
...t have 30mm spacing and the naze32 version is for 30.5mm spacing.
if there is interest i will try to make a customizer version.
Quadcopter
3d_export
$5
quadcopter
...quadcopter
3dexport
futuristic quadcopter design.<br>original design davidflo 77
turbosquid
$19
quadcopter
...lty free 3d model quadcopter for download as max, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1591426)
turbosquid
$25
QuadCopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Quadcopter 3D Model
...quadcopter 3d model
3dexport
quadcopter studio shaders
quadcopter 3d model vortex333 93968 3dexport
3d_export
$5
Quadcopter 3D Model
...quadcopter 3d model
3dexport
quadcopter aircraft helicopter
quadcopter 3d model greatghost 94019 3dexport
3d_export
$18
passenger quadcopter
... a multicopter is an aircraft built according to a helicopter scheme, with three or more rotors. previews rendered with redshift.
turbosquid
$159
Quadcopter Animated.
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Drone Quadcopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Drone Quadcopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$29
Quadcopter
...
questions about the continuation of the collection or the model can be asked here:<br>https://www.artstation.com/evgen_beg
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.
5Mm
3d_export
$25
5mm Explosive Flechette 3D Model
...xplosive flechette 3d model
3dexport
assault rifle grenade launchers
5mm explosive flechette 3d model awnonbhowmik 74565 3dexport
turbosquid
$15
engagement simple ring with diamond (5mm)
...engagement simple ring with diamond (5mm) for download as 3dm on turbosquid: 3d models for games, architecture, videos. (1157278)
turbosquid
$1
Flexible shaft coupling 5mm x 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$7
Tiny bracelet clasp lock 20mm X 5mm
... your bracelet parts to the clasp, also there is the original file in the files so you can change it on your own simply. enjoy it
3d_export
$5
cross with text jesus
...the text jesus is in an contur offset with 5mm ...
3d_export
$5
ring
...ring 3dexport lovely ring, adopt for print, one stown 5mm material : white / yellow gold/ silver. stl,...
3d_export
$11
crescent ring
...ring size is 17mm.<br>ring rail size is 53.4<br>stone size 5mm ...
3d_export
$5
Hex Spacers M3 Male-Female
...male-female 3dexport hex spacers m3 male-female with length from 5mm to 60mm for printed circuit boards. step...
3ddd
$1
LOOP RACK
...вешалка the clothes rack’s elegant frame is made of 5mmthick steel. it creates simple shapes, that vary depending on...
3d_export
free
solar rechargeable single led flashing light
...ties onto a pole etc, i used a single 5mm red/blue alternating flasher that pushes snugly into the 5mm...
Motors
archibase_planet
free
Motor
...base planet
motor motor engine engine electric motor
motor wagner n250213 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Motor
...motor
archibase planet
motor motor engine engine
motor n151112 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Motor
...motor
archibase planet
motor motor engine engine
motor n150615 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
turbosquid
$15
Motor
...otor
turbosquid
royalty free 3d model motor for download as on turbosquid: 3d models for games, architecture, videos. (1639404)
3d_ocean
$5
Electric motor
...electric motor
3docean
car electric engine industry motor phase train vehicle
an electric motor enjoy!
3d_ocean
$18
Electric Motor
...electric motor
3docean
electric motor engine machine mover parts
3d model electric motor for hoist crane
turbosquid
$29
Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
electric motor
...electric motor
3dexport
electric motor use for industrial purposes
3d_export
$5
servo motor
...tor
3dexport
it's a simple part of servo motor 0.75kw for used in machines assembly to show specified motor in own project.
8
turbosquid
$6
Rock 8-8
...urbosquid
royalty free 3d model rock 8-8 for download as obj on turbosquid: 3d models for games, architecture, videos. (1659393)
3ddd
$1
Italamp 387/8+8
...italamp 387/8+8
3ddd
italamp
люстра italamp 387/8+8
размеры 92x71h
3ddd
$1
8 марта
...8 марта
3ddd
8 марта
кресло 8 марта
design_connected
$16
No 8
...nected
photo-realistic 3d models of the sibast no 8 armchair from sibast for 3d architectural and interior design presentations.
3d_export
$5
hinge 8
...hinge 8
3dexport
hinge 8
3d_export
$5
iphone 8
...iphone 8
3dexport
iphone 8
turbosquid
$69
iPhone 8 and iPhone 8 Plus
... free 3d model iphone 8 and iphone 8 plus for download as max on turbosquid: 3d models for games, architecture, videos. (1202442)
turbosquid
$12
Calligraphic Digit 8 Number 8
...hic digit 8 number 8 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389341)
3ddd
free
PLANTS 8
...plants 8
3ddd
цветок , горшок
plant 8,,, hope u all like it
3ddd
$1
8 Марта / Amadey
...8 марта / amadey
3ddd
8 марта
8 marta amadey