Thingiverse
Forend Bracket, Crosman 2240 by wt808
by Thingiverse
Last crawled date: 3 years, 1 month ago
Mounting bracket for attaching a 2250 forend to a Crosman 2240. Improved support hold when configured as a carbine. Allows removal of the PowerMax-HiPAC adapter and installation of a CO2 cartridge and cap without removing the forend. Covers the opening at the front of the forend.
You will need the forend, barrel band, and metal bracket for a 2250, plus one 3/4"L and two 3/8"L 6-40 or 8-32 pan head or socket head screws.
If you use 8-32 screws, you will need to tap the metal bracket, barrel band lug, and the front hole of the 3D-printed forend bracket.
See the photos for the installation sequence. Note that the barrel band is installed with the lug facing forward and flush with the front of the tube.
You will need the forend, barrel band, and metal bracket for a 2250, plus one 3/4"L and two 3/8"L 6-40 or 8-32 pan head or socket head screws.
If you use 8-32 screws, you will need to tap the metal bracket, barrel band lug, and the front hole of the 3D-printed forend bracket.
See the photos for the installation sequence. Note that the barrel band is installed with the lug facing forward and flush with the front of the tube.
Similar models
thingiverse
free
Crosman 1322 Scope mount by 1gregdammit1
...will need removed to install, as the front mount slips around the barrel. it's surprisingly sturdy and has worked quite well.
thingiverse
free
Front sight support for HW977 compatible with IRON Sight for Crosman steel Breech 2240 2250 1377 by daslowafast
...40 2250 1377 by daslowafast
thingiverse
hw977 front sight support adapter for iron sight for crosman steel breech 2240 2250 1377
grabcad
free
CROSMAN 2240 – 2250 Barrel Scope Mount - 11 mm Prisma/Dovetail
...2260-2300 and all barrels with 11 mm outer diameter. can also be used as a base for a
<br />prisma-to-weaver adaptor rail.
thingiverse
free
Front grip for Crosman 2240 by Andersi
...front grip for crosman 2240 by andersi
thingiverse
a front grip for crosman 2240, use m5 stop screws for fastening.
grabcad
free
CROSMAN 2240 - 2250 Custom Trigger Adjustment
...ed to the tension on the hammer release you will notice, depending on the setting, a change in force needed to pull the trigger.
thingiverse
free
Crosman 2240 Suppressor
...ve front sight and push onto barrel and just align the sight with the rear. if its shooting to high shave off the sight a little.
grabcad
free
CROSMAN 2240 - 2250 Custom Long Steel Breech(Righthand) with Endcap
... by two. that way the barrel will be kept in place much better/thighter and shots will be more accurate for sure(!).
<br />
thingiverse
free
Pump Arm Forend Liner, Crosman 1322 1377 by wt808
...sert the liner into the forend. slide the pump arm into the groove in the liner, line up the screw holes, and replace the screws.
grabcad
free
CROSMAN 2240 - 2250 Custom Power Adjustor
... valve opened longer or less long.
<br />
<br />ps: adjustment will have an effect on co2 use per shot.
<br />
grabcad
free
CROSMAN 2240 - 2250 Standard & Custom Probes
...n)
<br />- custom probehandle
<br />- o-ring for probe
<br />can be used in 2240-2250b-2250xt-2260-2300, etc.
Wt808
thingiverse
free
Li'l Crenellated Pumpkin Puncher by wt808
...li'l crenellated pumpkin puncher by wt808
thingiverse
scale up or down to fit snugly, ie. on 7/16" - 1/2" od
thingiverse
free
Dust Cap, Crosman 22xx PowerMax-HiPAC Fill Nipple Cover by wt808
...rse
dust cap for the integral 8mm foster fill nipple of a powermax-hipac pcp conversion kit for crosman 22xx pistols and rifles.
thingiverse
free
Single Shot Tray, Benjamin Marauder .22 Rifle by wt808
....
i modified these trays to fit tighter than the original. sand the back and bottom sides as needed to get the fit that you want.
thingiverse
free
Dust Cover/Cap, Battery Charger SAE Connector by wt808
...out of connectors that are exposed to the elements. lanyard loop for keeping the cover tethered to the cord or for wall mounting.
thingiverse
free
Single Shot Tray, Benjamin Marauder .22 Pistol by wt808
....
i modified these trays to fit tighter than the original. sand the back and bottom sides as needed to get the fit that you want.
thingiverse
free
Single Shot Tray, Benjamin Marauder .25 Rifle by wt808
....
i modified these trays to fit tighter than the original. sand the back and bottom sides as needed to get the fit that you want.
thingiverse
free
Single Shot Tray, Benjamin Marauder .177 Rifle by wt808
....
i modified these trays to fit tighter than the original. sand the back and bottom sides as needed to get the fit that you want.
thingiverse
free
Single Shot Tray, Benjamin Marauder .30 Rifle by wt808
....
i modified these trays to fit tighter than the original. sand the back and bottom sides as needed to get the fit that you want.
thingiverse
free
Single Shot Tray, Benjamin Marauder .357 Rifle by wt808
....
i modified these trays to fit tighter than the original. sand the back and bottom sides as needed to get the fit that you want.
thingiverse
free
Single Shot Tray, Benjamin Marauder .177 Pistol by wt808
....
i modified these trays to fit tighter than the original. sand the back and bottom sides as needed to get the fit that you want.
Forend
3d_export
$28
Forestock 3D Model
...forestock 3d model 3dexport rifle stock fore-end forestock forend forearm ak ak-74 74 1974 part item weapons forestock...
thingiverse
free
MAXIS Remixed Forend by TheGeek001
...maxis remixed forend by thegeek001
thingiverse
added a secondary rail to the rear for a grip.
thingiverse
free
MAXIS MK1 Forends by EvolvingExtrusions
...od and mlok coming soon.
for more up to date info please subscribe to my patreon here -https://www.patreon.com/evolvingextrusions
thingiverse
free
Pump Arm Forend Liner, Crosman 1322 1377 by wt808
...sert the liner into the forend. slide the pump arm into the groove in the liner, line up the screw holes, and replace the screws.
thingiverse
free
Magpul Saiga 12 forend adapter by ReductiveNut
...version i ended up using is forearm for the receiver interface, forearmff_2hole_10-32 for the under forearm and picatinny custom.
thingiverse
free
PP700W Forends by Qyuubi786
...a table.
it simply slides over the main tube.
i would print with 4 outer layers and 30% infill for rigidity and to save filament.
thingiverse
free
BLACK ACES TACTICAL PRO S MINI FOREND by mechpilotz
...ic. this is so if anything were to happen to the forend, like getting scratched, dinged, nicked, or broke, a fix is a print away.
thingiverse
free
Remington 870 12 GA Shotgun Forend Nut Removal Tool
...ertically, out of pla and used the default support settings (which made a concentric circle around the tool to support the tabs).
thingiverse
free
AKS-74u 1:4
...aks-74u 1: 4 with additional equipment, movable elements, various forend ...
Crosman
thingiverse
free
cargador monotiro crosman pumpmaster by ROROCHAS
...cargador monotiro crosman pumpmaster by rorochas
thingiverse
cargador monotiro crosman
thingiverse
free
Crosman 1377 abs breech by ch12o4n2p
...crosman 1377 abs breech by ch12o4n2p
thingiverse
editing crosman 1377 abs breech
thingiverse
free
Crosman 3357 drum / cylinder by namtrax
...crosman 3357 drum / cylinder by namtrax
thingiverse
drum for a paintball crosman 3357 spotmarker
thingiverse
free
Crosman dovetail rail by mdellen
...ed this: http://www.thingiverse.com/make:140778
and this: http://www.thingiverse.com/make:140780
to mount a scope on a crosman.
thingiverse
free
Crosman 2240 Suppressor
...ve front sight and push onto barrel and just align the sight with the rear. if its shooting to high shave off the sight a little.
thingiverse
free
Shoulder stock for crosman 2240 by Andersi
...shoulder stock for crosman 2240 by andersi
thingiverse
a cheek stock for crosman 2240 and other models, not sure witch.
thingiverse
free
Crosman 1377 игрушка крюгер by xm32
...crosman 1377 игрушка крюгер by xm32
thingiverse
игрушка по мотивам pcp crosman 1377 рср крюгерган
thingiverse
free
Crosman 1377 soundmoderator (silencer) by Hinfa
...????? ??
6 - ??????????? , ?????????? ????? ?? (?????? ?? ????????, ??? ???????? ???????)
??????????? ? ?????? "??????"
thingiverse
free
Front grip for Crosman 2240 by Andersi
...front grip for crosman 2240 by andersi
thingiverse
a front grip for crosman 2240, use m5 stop screws for fastening.
thingiverse
free
DIY Crosman Transfer Port by k19k19
...n. works super great! no leak. tested on crosman challenger modified to push pellet at 20fpe
printed using tpu flexible filament.
2240
turbosquid
$15
human-2240
...bosquid
royalty free 3d model human-2240 for download as obj on turbosquid: 3d models for games, architecture, videos. (1209128)
turbosquid
$19
Soviet Sedan 2240
... soviet sedan 2240 for download as max, fbx, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1334357)
3ddd
$1
PUSHE | Дьюкс
...3ddd pushe , дьюкс диванчик pushe модель дьюкс. размеры 2240980*910*. ...
3ddd
$1
Римские шторы #3
...римские производитель: - модель: римские шторы размеры: w-820mm, d-80mm, h-2240260mm анимированная модель римской...
3ddd
free
Twils Camelia model 32
...производства фабрики twils (италия). габариты (ш + в +г) 2240900*1130 ...
3ddd
$1
Silik Minerva
...сервант , silik сервант silik minerva (art. 991) ширина: 2240 мм глубина: 590 мм высота: 2520 мм сервант без...
3ddd
$1
Буфет Bric 69 Gervasoni
...navone размеры / мм ширина x глубина x высота 2240 x 490 x...
3d_export
$5
amongus dead crewman
...eevee.<br>high-quality model perfect for 3d illustrations and animations<br>model rigged<br>details<br>vertices: 2240lt;br>edges: 4388<br>faces: 2204<br>triangles:...
3d_export
$5
Supermarket shelf and products
...- soda: 352 / 162 - yogurt: 4480 / 2240 - cup: 544 / 258 - milk: 180 /...
3d_export
$15
old street lamps
...lamp3: tris 3208 verts 1644 lamp4: tris 4334 verts 2240 ...
Bracket
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel console
bracket 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel console
bracket 8 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket n280911 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
holder corbel bracket
bracket 9 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 10 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
corbel console bracket
bracket 11 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
holder console bracket
bracket 12 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 13 - 3d model (*.gsm+*.3ds) for interior 3d visualization.