Folgertech FT-5 R2 Ultrabase clamp by 3d-druck-lingen

Last crawled date: 3 years, 1 month ago

While using the Anycubic Ultrabase on my Folgertech FT-5 R2 I noticed that some Filaments like to stick really well, sometimes to well on the Ultrabase. So I wanted a quick solution to remove the Ultrabase and just turn it around for using the glass underside. So I can print on a normal glass bed with some kind of adhesive on it.
Thats it, nothing beautiful but it works. I use these clamps on the four outer corners. I removed the four springs and put the clamp between the heated aluminum bed and the bed holder plate.
The other springs are still mounted and only slightly tightened. Sure you can replace all springs and use 8 of these clamps.
Please keep in mind that the build plate gets hot, so use some PETG or something similar with heat resistance. I used Extrudr GreenTec.
I also uploaded the step file, maybe you want to change something.
Update October 2018:
I made a new version which is a little bit mor narrow than version 1. I had the problem that my BL-Touch catches the clamp and breaks it´s holder...
Like before .stl and .step files are available.