Thingiverse
Flying Peach - 1407 by Babouch
by Thingiverse
Last crawled date: 3 years ago
This is the "Flying Peach" project based on a cheap 130mm frame from MyRcMart.com, 1407 brushless motors, 3inch props, Piko BLX and Eachine TX cam/vtx combo.
The goal was to obtain a super fun little 3inch monster on 3s and 4s relatively light that provides well protected electronics.
Maybe that goal was reached?...take a look...
https://www.youtube.com/watch?v=3jLuoYSxBlM
As the frame was designed for 30.5-30.5 flight controller, please use the provided "Support_Piko_BLX" printed in TPU or other flex material to mount the 20-20 flight controller and help with vibrations.
Components:
Frame
http://www.myrcmart.com/rcx-x130-fpv-racing-frame-3k-carbon-p-9645.html
Flight Controler PikoBLX
https://www.banggood.com/CleanFlight-BetaFlight-Micro-F3-Flight-Controller-Built-in-PDB-Buzzer-20X20mm-For-FPV-Racing-p-1094615.html?p=MY23025537272201607R
Esc's Littlebee 20amp BlHeliS
https://www.banggood.com/4X-Favourite-FVT-LittleBee-20A-S-ESC-BLHeli_S-OPTO-2-4S-Supports-Mulitshot-Oneshot42-OneShot125-p-1066951.html?p=MY23025537272201607R
Receiver FrSky or Flysky
https://www.banggood.com/Frsky-XM-Micro-D16-SBUS-Full-Range-Receiver-Up-to-16CH-p-1110020.html?p=MY23025537272201607R
or
https://www.banggood.com/FrSky-XM-2_4G-16CH-Telemetry-Receiver-p-1107435.html?p=MY23025537272201607R
or
https://www.banggood.com/Flysky-FS-A8S-2_4G-8CH-Mini-Receiver-with-PPM-i-BUS-SBUS-Output-p-1092861.html?p=MY23025537272201607R
Motors Brotherhobby 1407 3600kv or XNova 1407 3500kv
https://www.banggood.com/Brotherhobby-Tornado-T1-1407-3600KV-4S-Racing-Edition-Brushless-Motor-for-FPV-Racer-p-1097174.html?p=MY23025537272201607R
Fpv Eachine TX combo
https://www.banggood.com/Eachine-TX03-Super-Mini-025mW50mW200mW-Switchable-AIO-5_8G-72CH-VTX-600TVL-13-Cmos-FPV-Camera-p-1104884.html?p=MY23025537272201607R
or
https://www.banggood.com/Eachine-TX02-Super-Mini-AIO-5_8G-40CH-200mW-VTX-600TVL-14-Cmos-FPV-Camera-p-1088368.html?p=MY23025537272201607R
or
https://www.banggood.com/Eachine-TX01-Super-Mini-AIO-5_8G-40CH-25MW-VTX-600TVL-14-Cmos-FPV-Transmitter-p-1088374.html?p=MY23025537272201607R
Antenna
https://www.banggood.com/Eachine-X73-Micro-Racing-Quadcopter-Spare-Parts-FPV-5_8G-VTX-Antenna-p-1092506.html?p=MY23025537272201607R
M3 Screws
https://www.banggood.com/340pcs-M3-A2-Stainless-Steel-Hex-Socket-Screws-Nut-Assortment-Kit-p-1109208.html?p=MY23025537272201607R
Buzzer
https://www.banggood.com/5-PCS-Super-Loud-5V-Active-Alarm-Buzzer-Beeper-Tracker-95_5mm-for-Racing-Drone-p-1117207.html?p=MY23025537272201607R
Heat Shrink Tubes
https://www.banggood.com/30Pcs-5-Size-Halogen-Free-41-Heat-Shrink-Tubing-Wire-Cable-4mm-16mm-Black-p-1079439.html?p=MY23025537272201607R
Props
https://www.banggood.com/Kingkong-3030-3x3-CW-CCW-Propellers-for-Multicopters-FPV-Racer-Red-Black-p-1074758.html?p=MY23025537272201607R
or
https://www.banggood.com/8-Pairs-Kingkong-3x3x4-3030-4-Blade-Propeller-CW-CCW-for-FPV-Racer-p-1083923.html?p=MY23025537272201607R
Battery
4s 850mah - 4s 650mah - 3s 500mah
-
Thanks to Microdure and Brax for their precious help and printing of the prototype
https://www.thingiverse.com/Microdure/about
https://www.thingiverse.com/Brax/about
The goal was to obtain a super fun little 3inch monster on 3s and 4s relatively light that provides well protected electronics.
Maybe that goal was reached?...take a look...
https://www.youtube.com/watch?v=3jLuoYSxBlM
As the frame was designed for 30.5-30.5 flight controller, please use the provided "Support_Piko_BLX" printed in TPU or other flex material to mount the 20-20 flight controller and help with vibrations.
Components:
Frame
http://www.myrcmart.com/rcx-x130-fpv-racing-frame-3k-carbon-p-9645.html
Flight Controler PikoBLX
https://www.banggood.com/CleanFlight-BetaFlight-Micro-F3-Flight-Controller-Built-in-PDB-Buzzer-20X20mm-For-FPV-Racing-p-1094615.html?p=MY23025537272201607R
Esc's Littlebee 20amp BlHeliS
https://www.banggood.com/4X-Favourite-FVT-LittleBee-20A-S-ESC-BLHeli_S-OPTO-2-4S-Supports-Mulitshot-Oneshot42-OneShot125-p-1066951.html?p=MY23025537272201607R
Receiver FrSky or Flysky
https://www.banggood.com/Frsky-XM-Micro-D16-SBUS-Full-Range-Receiver-Up-to-16CH-p-1110020.html?p=MY23025537272201607R
or
https://www.banggood.com/FrSky-XM-2_4G-16CH-Telemetry-Receiver-p-1107435.html?p=MY23025537272201607R
or
https://www.banggood.com/Flysky-FS-A8S-2_4G-8CH-Mini-Receiver-with-PPM-i-BUS-SBUS-Output-p-1092861.html?p=MY23025537272201607R
Motors Brotherhobby 1407 3600kv or XNova 1407 3500kv
https://www.banggood.com/Brotherhobby-Tornado-T1-1407-3600KV-4S-Racing-Edition-Brushless-Motor-for-FPV-Racer-p-1097174.html?p=MY23025537272201607R
Fpv Eachine TX combo
https://www.banggood.com/Eachine-TX03-Super-Mini-025mW50mW200mW-Switchable-AIO-5_8G-72CH-VTX-600TVL-13-Cmos-FPV-Camera-p-1104884.html?p=MY23025537272201607R
or
https://www.banggood.com/Eachine-TX02-Super-Mini-AIO-5_8G-40CH-200mW-VTX-600TVL-14-Cmos-FPV-Camera-p-1088368.html?p=MY23025537272201607R
or
https://www.banggood.com/Eachine-TX01-Super-Mini-AIO-5_8G-40CH-25MW-VTX-600TVL-14-Cmos-FPV-Transmitter-p-1088374.html?p=MY23025537272201607R
Antenna
https://www.banggood.com/Eachine-X73-Micro-Racing-Quadcopter-Spare-Parts-FPV-5_8G-VTX-Antenna-p-1092506.html?p=MY23025537272201607R
M3 Screws
https://www.banggood.com/340pcs-M3-A2-Stainless-Steel-Hex-Socket-Screws-Nut-Assortment-Kit-p-1109208.html?p=MY23025537272201607R
Buzzer
https://www.banggood.com/5-PCS-Super-Loud-5V-Active-Alarm-Buzzer-Beeper-Tracker-95_5mm-for-Racing-Drone-p-1117207.html?p=MY23025537272201607R
Heat Shrink Tubes
https://www.banggood.com/30Pcs-5-Size-Halogen-Free-41-Heat-Shrink-Tubing-Wire-Cable-4mm-16mm-Black-p-1079439.html?p=MY23025537272201607R
Props
https://www.banggood.com/Kingkong-3030-3x3-CW-CCW-Propellers-for-Multicopters-FPV-Racer-Red-Black-p-1074758.html?p=MY23025537272201607R
or
https://www.banggood.com/8-Pairs-Kingkong-3x3x4-3030-4-Blade-Propeller-CW-CCW-for-FPV-Racer-p-1083923.html?p=MY23025537272201607R
Battery
4s 850mah - 4s 650mah - 3s 500mah
-
Thanks to Microdure and Brax for their precious help and printing of the prototype
https://www.thingiverse.com/Microdure/about
https://www.thingiverse.com/Brax/about
Similar models
thingiverse
free
Protection Camera tiltable FPV Super Mini 25mW Eachine TX01 / TX02 200mw by Microdure
...mw-vtx-600tvl-14-cmos-fpv-camera-p-1088368.html?p=ld020411878172015024
it takes just two screws m1.6 10mm to secure the two parts
thingiverse
free
Flying Peach - Microswift Evolution by Babouch
...ir precious help and printing of the prototype
https://www.thingiverse.com/microdure/about
https://www.thingiverse.com/brax/about
thingiverse
free
Protection Camera FPV TPU Eachine TX01 / TX02 / TX03 by Microdure
... several versions for the tx01 and 02 and for the tx03 which is larger
it takes just two screws m1.6 10mm to secure the two parts
cults
free
Polycarbonate protection Camera FPV Super Mini 25mW Eachine TX01 / TX02 200mw
...4-cmos-fpv-camera-p-1088368.html?rmmds=myorder?p=ld020411878172015024
it takes just two screws m1.6 10mm to secure the two parts
thingiverse
free
Tiny Whoop 68mm polycarbonate cross fashion by Microdure
...ra-p-1088368.html?p=ld020411878172015024
lipo 1s nanotech 260mha = 3min flight
8 x m1.6 x 5mm
https://www.facebook.com/microdure/
thingiverse
free
Tiny Whoop X mode 68 mm Polycarbonate by Microdure
...ra-p-1088368.html?p=ld020411878172015024
lipo 1s nanotech 260mha = 3min flight
8 x m1.6 x 5mm
https://www.facebook.com/microdure/
thingiverse
free
FPV Nano 85 by Bongo_1st
...tenna: https://www.banggood.com/eachine-5_8g-3dbi-brass-antenna-omnidirectional-ipex-port-for-vtx01vtx02vtx03atx03-p-1147689.html
cults
free
FPV TPU Protection Eachine TX01 / TX02 / TX03
... several versions for the tx01 and 02 and for the tx03 which is larger
it takes just two screws m1.6 10mm to secure the two parts
thingiverse
free
Tiny Whoop 2S 90mm Polycarbonate by Microdure
...ent polycarbonate in ultimaker is very fragile compared to black which is very resistant !!!!
https://www.facebook.com/microdure/
cults
free
Tiny Whoop 68mm polycarbonate cross fashion
...mmds = myorder? p = ld020411878172015024
lipo 1s nanotech 260mha = 3min flight
8x m1.6x5mm
https://www.facebook.com/microdure/
Babouch
thingiverse
free
Runcam Microswift by Babouch
...uncam microswift" to use for custom builds.
you can find it here:
microswift 3:
https://www.banggood.com/custlink/333knauqjv
thingiverse
free
LittleBee 20Amp by Babouch
...avourite-fvt-littlebee-20a-s-esc-blheli_s-opto-2-4s-supports-mulitshot-oneshot125-oneshot42-p-1060963.html?p=my23025537272201607r
thingiverse
free
Foxeer Arrow V3 - HS1190 by Babouch
...l of the "foxeer arrow v3" to use for custom builds.
you can find it here:
https://www.banggood.com/custlink/kmm3nb1vng
thingiverse
free
Brotherhobby Tornado T1 1407 by Babouch
...the brotherhobby tornado t1 1407 to use in your custom builds.
you can find it here:
https://www.banggood.com/custlink/dvkvnjmqor
thingiverse
free
Gopro Tripod Mount by Babouch
... screw thread of common tripods for cameras, so you can use it on most of the accessories avaible...
hope it'll be useful...!
thingiverse
free
TS 100 - Ultimate Grip by Babouch
......
you'll have to change the tip screw for a 5mm m2 one
update firmware: https://github.com/ralim/ts100/releases/tag/v2.10.1
thingiverse
free
JellyFish by Babouch
...ir precious help and printing of the prototype
https://www.thingiverse.com/microdure/about
https://www.thingiverse.com/brax/about
thingiverse
free
RaceWhoop 2.5" by Babouch
...efficiency and reliability of the props in case of shock, the gap of the duct printed at 100% is more tight so do your own tests.
thingiverse
free
Tiny Whoop - Mobula 6 - Canopy by Babouch
...about 25°
for bicolor, change filament after 4 layers
print at 45° angle so that the top layer lines are aligned with the canopy
thingiverse
free
HGLRC - XJB F438 Flytower - 33A BLheli_S by Babouch
... stack 20*20 on the market for little 3" and 4" quads
you can find it here
https://www.banggood.com/custlink/vdvknlqnim
1407
3ddd
$1
Favourite 1407-8P
...favourite 1407-8p
3ddd
favourite
модель люстры favourite 1407-8p. в архиве файлы в 2011 и 2014 версиях и obj-файл.
3ddd
$1
PROVASI mirror art.1407
...i mirror art.1407
3ddd
provasi , круглое
зеркало - provasi art.1407
размеры - d120 x h10
3d_export
$50
3D Home 1407 3D Model
...chair furniture texture table lamp apartment rug carpet restaurant hotel sitting
3d home 1407 3d model richard3015 45720 3dexport
3ddd
$1
BANDS chair
...bands chair 3ddd bands , varaschin http://varaschin.it/en/products/small-armchairs/chair-with-armrests-bands-1407# ...
3d_ocean
$5
rock_2
...rock_2 3docean mount mountain rock rocks stone rock_2….............1405.polygon. .1407vertices. 4096 * 4096 texture. obj,fbx,blend format...
3ddd
$1
Стол журнальный Модеро Loran Мебель
...loran журнальный стол фодеро фабрики loran мебель. цвет marrone. turbosmoothhttp://loranmebel.ru/katalog/div_id/1407modero_stol_jurnalnyj_1/virtual ...
3d_export
$9
Medieval Wooden Barrel
...4096x4096 (tga)<br>- metallic<br>- normal (directx)<br>- color<br>- roughness<br>- ao<br>polycount(barrel)<br>- verts: 1407lod0),1183(lod1),763(lod2),424(lod3).<br>- edges:2845(lod0),2397(lod1),1665(lod2),955(lod3).<br>- faces: 1470 (lod0),1246(lod1),934(lod2),601(lod3).<br>- tris: 2750 (lod0),2302(lod1),1462(lod2),643(lod3).<br>file formats: -fbx(binary)...
3d_export
$45
Medieval Market Fruit Stalls Tent Pack
...edges: 25938 (lod0),22936(lod1),12423(lod2),2774(lod3.)<br>- faces: 14233(lod0),14462(lod1),7865(lod2),1796(lod3.)<br>- tris: 20627 (lod0),14464(lod1),7867(lod2),1798(lod3.)<br>polycount(barrel)<br>- verts: 1407lod0),1183(lod1),763(lod2),424(lod3).<br>- edges:2845(lod0),2397(lod1),1665(lod2),955(lod3).<br>- faces: 1470 (lod0),1246(lod1),934(lod2),601(lod3).<br>- tris: 2750 (lod0),2302(lod1),1462(lod2),643(lod3).<br>polycount(fruit basket)<br>- verts:...
3d_export
$43
Medieval Market Stalls Cylindrical Tent Fruits Vegetables
...edges: 21181 (lod0),15595(lod1),8088(lod2),3564(lod3.)<br>- faces: 12028(lod0),9994(lod1),5159(lod2),2329(lod3.)<br>- tris: 16273 (lod0),9994(lod1),5159(lod2),2329(lod3.)<br>polycount(barrel)<br>- verts: 1407lod0),1183(lod1),763(lod2),424(lod3).<br>- edges:2845(lod0),2397(lod1),1665(lod2),955(lod3).<br>- faces: 1470 (lod0),1246(lod1),934(lod2),601(lod3).<br>- tris: 2750 (lod0),2302(lod1),1462(lod2),643(lod3).<br>polycount( crates of...
3d_export
$49
Medieval Market Vegetable Stalls Tent Pack
...11178(lod0)8320(lod1),4807(lod2.),716(lod3.)<br>- edges:23923 (lod0),21957(lod1),12623(lod2),1904(lod3.)<br>- faces: 12810(lod0),13702(lod1),7881(lod2),1253(lod3.)<br>- tris: 19330 (lod0),13702(lod1),7881(lod2),1253(lod3.)<br>polycount(barrel)<br>- verts: 1407lod0),1183(lod1),763(lod2),424(lod3).<br>- edges:2845(lod0),2397(lod1),1665(lod2),955(lod3).<br>- faces: 1470 (lod0),1246(lod1),934(lod2),601(lod3).<br>- tris: 2750 (lod0),2302(lod1),1462(lod2),643(lod3).<br>polycount(basket with vegetables)<br>-...
Peach
archibase_planet
free
Peaches
...peaches
archibase planet
peaches peach fruit food
peaches n180614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
design_connected
$11
Peaches
...peaches
designconnected
peaches computer generated 3d model.
turbosquid
$9
Peach
...h
turbosquid
royalty free 3d model peach for download as fbx on turbosquid: 3d models for games, architecture, videos. (1546225)
turbosquid
$15
Peach
...quid
royalty free 3d model peach for download as lwo and obj on turbosquid: 3d models for games, architecture, videos. (1203012)
turbosquid
$5
Peach
... free 3d model peach for download as , stl, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1620406)
turbosquid
$5
Peach
... free 3d model peach for download as , stl, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1620404)
turbosquid
$5
Peach
... free 3d model peach for download as , stl, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1620402)
turbosquid
$5
Peach
... free 3d model peach for download as , stl, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1620398)
turbosquid
$5
Peach
... free 3d model peach for download as , stl, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1620393)
3ddd
free
Nectarines / Peaches
...нектарин , персик , фрукты
nectarines / peaches
Flying
design_connected
$13
Fly-Fly
...fly-fly
designconnected
foscarini fly-fly computer generated 3d model. designed by palomba, ludovica.
3ddd
$1
Foscarini FLY-FLY
...foscarini fly-fly
3ddd
foscarini , fly-fly
foscarini fly-fly
полигонов: 73 022
3ddd
$1
Foscarini Fly-Fly
...foscarini fly-fly
3ddd
foscarini
люстра fly-fly
3d_export
free
fly
...fly
3dexport
fly
turbosquid
$15
fly fishing fly
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
free
Fly
...fly
designconnected
free 3d model of fly by alias designed by acerbis, marco.
turbosquid
$49
Fly Fly Maya Rig
...turbosquid
free 3d model fly fly maya rig for download as ma on turbosquid: 3d models for games, architecture, videos. (1182393)
design_connected
$13
Fly
...fly
designconnected
zanotta fly computer generated 3d model. designed by robson , mark .
design_connected
$13
Fly
...fly
designconnected
kartell fly computer generated 3d model. designed by laviani, ferruccio.
3d_ocean
$10
3D Fly
...3d fly
3docean
3d fly 3ds max fly
this is a 3d fly model.