Thingiverse
Fluid Flywheel clutch by ExcellentEngineering
by Thingiverse
Last crawled date: 3 years, 1 month ago
i had this in my head for a long time and i finally sat down and designed it
it is for RC cars and is about 60mm diameter, it requires
6x (m3x18) bolts
3x m3 nuts
2x (external 22mm internal 8mm) bearings (figit spinner ones)
water.
all you need to do is bolt the spinners to the shafts and then bolt the outer cases together. then fill with water (you will need to drill a hole for this then put a bolt in it.7
this should work if fully filled with water and should mean that if you have undertorqued high RPM motors that they can keep spinning even if you stop.
plz leave comments if you want it modifying for you
i have made a few improvements in all of the stls eg parts being slightly differnet sizes for ease of manufacture
also i have added a mount which can be used on both ends
it is for RC cars and is about 60mm diameter, it requires
6x (m3x18) bolts
3x m3 nuts
2x (external 22mm internal 8mm) bearings (figit spinner ones)
water.
all you need to do is bolt the spinners to the shafts and then bolt the outer cases together. then fill with water (you will need to drill a hole for this then put a bolt in it.7
this should work if fully filled with water and should mean that if you have undertorqued high RPM motors that they can keep spinning even if you stop.
plz leave comments if you want it modifying for you
i have made a few improvements in all of the stls eg parts being slightly differnet sizes for ease of manufacture
also i have added a mount which can be used on both ends
Similar models
thingiverse
free
Triangle Spinner in CM by reminator2468
... cm so you can instantly print, without needing to increasing the size. i have yet to print it, but it should fit 608zz bearings.
cg_trader
$10
Fidget Spinner | 3D
... just won't spin as fast because of the weight distribution. fidget 3dprint fidgetspinner printable toy games toys games toys
thingiverse
free
Garden Pump Funnel by Zwom
...is funnel.
the tube should have an inner diameter of 38mm (1.5") and can be cut to the length you need for your application.
thingiverse
free
Trinity Spinner by LysergicOracle
... printing the spinner body halves and button halves with support, though the spinner body doesn't necessarily need it.
enjoy!
thingiverse
free
Fidget Spinner- Bolt Spinner by Masherwould
...e realistic expectations.
attention: set the spinner for high fill, because the ball bearings work better when they are solid.
3dwarehouse
free
fidget spinner + cap
...87 bearings i have not yet printeed it so if you can let me know if it works #2017 #3d_printable #fidget #fidget_spinner #spinner
thingiverse
free
Dead bolt Pestillo by FilaPRO
...ead bolt for a door or others.i have printed it with fill 45% .i recommend that you print all the parts in vertical with support.
thingiverse
free
Spinner for 3 years old child by Blosters
...ure how long a spinner have to be to fit to her hand, and i design a 25mm spinner.
you'll need a mr126zz bearing (12x6x4 mm)
thingiverse
free
Water cooling custom loop filling funnel by Empse
...ake sure your final product will fit nicely, it uses very little material and it can be screwed into the thread with 8mm hex key.
thingiverse
free
Wind Spinner V5 by zebra105s
...makes for interesting design. i did two walls of petg as this is going to get some sunlight. may do many walls and skip infill?
Excellentengineering
thingiverse
free
Gears by ExcellentEngineering
...gears by excellentengineering
thingiverse
these mesh easily together will work well in a rc drive train
thingiverse
free
Gurder by ExcellentEngineering
...gurder by excellentengineering
thingiverse
this could be used in a rc car garage or a scale demolition vehicle
thingiverse
free
rim by ExcellentEngineering
...rim by excellentengineering
thingiverse
rim for rc car
small thing bigger thing coming soon
thingiverse
free
Large Gear by ExcellentEngineering
...large gear by excellentengineering
thingiverse
this is a gear with 73 teath
thingiverse
free
Towing Eye by ExcellentEngineering
...towing eye by excellentengineering
thingiverse
this is a simple towing eye
thingiverse
free
Gurder by ExcellentEngineering
...rder by excellentengineering
thingiverse
this could be put in a scale demolition car to make it look meaner or in a model garage
thingiverse
free
Rim and tyre by ExcellentEngineering
...rim and tyre by excellentengineering
thingiverse
another rim and tyre design
thingiverse
free
Front Lights by ExcellentEngineering
...front lights by excellentengineering
thingiverse
these are some aerodynamic front light for a rc car
thingiverse
free
Front Lights by ExcellentEngineering
...front lights by excellentengineering
thingiverse
this is some aerodynamic front light for an rc car
thingiverse
free
Hovercraft Prop by ExcellentEngineering
...ring
thingiverse
this is a propeller for a hovercraft it works and fit with no modifications needed https://youtu.be/7dupvxxerx4
Flywheel
turbosquid
$1
Flywheel
...alty free 3d model flywheel for download as ige, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1216111)
turbosquid
$1
Flywheel
...ee 3d model flywheel for download as ige, obj, stl, and sldpr on turbosquid: 3d models for games, architecture, videos. (1221999)
turbosquid
$1
Flywheel
...ee 3d model flywheel for download as ige, obj, stl, and sldpr on turbosquid: 3d models for games, architecture, videos. (1220977)
turbosquid
$1
Flywheel(1)
...alty free 3d model flywheel for download as ige, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1217730)
3d_export
$5
six cylinder radial engine flywheel
...lywheel 3d model. this is installed basically to store electrical energy and deliver energy as a mechanical coupled with gear box
3d_export
$30
Compressed Air Engine 3D Model
...air engine 3d model 3dexport pneumatic compressor engine motor flywheel shaft camshaft piston valve block engineering compressed-air driven compressed...
3d_export
$10
Clutch disk 3D Model
...sedan speed gearbox differential drive shaft pressure plate bearing flywheel engine vehicle gear axle camshaft clutch disk 3d model...
3d_export
$75
Minature Wobble Steam Engine 3D Model
...3dexport minature wobble steam engine thermo thermodynamics combustion boiler flywheel crankshaft pistol cylinder power energy compressed air minature wobble...
3d_ocean
$4
Clutch disk
...auto axle bearing camshaft car clutch differential drive engine flywheel gear gearbox plate pressure sedan shaft speed vehicle a...
3d_export
$229
GT500 Engine - Disassembled Engine
...head<br>cylinder head bolts<br>engine tools<br>exhaust manifold - l<br>exhaust manifold - r<br>flywheellt;br>fuel injector system: -fuel injectors - l -fuel injectors -...
Clutch
3ddd
$1
clutch
...clutch
3ddd
clutch vivienne , чехол
clutch vivienne
3ddd
free
McQ clutch
...mcq clutch
3ddd
alexande mcqueen clutch
alexande mcqueen clutch
turbosquid
free
Clutch
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
McQ Knucklebox clutch
...klebox clutch
3ddd
mcq knucklebox clutch , клач
mcq knucklebox clutch spring summer 2014
turbosquid
$15
Clutch lever
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Corb for Clutch
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Screwdriver Clutch
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
Clutch PB
...model clutch pb for download as 3ds, dxf, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1230418)
turbosquid
$6
Plate for Clutch
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Clutch with Bow
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Fluid
turbosquid
free
Fluid(Fluid/Flow)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
fluid
... вода , раковина , унитаз
сантехника_fluid
turbosquid
$3
correction fluid
...d
royalty free 3d model correction fluid for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1148772)
turbosquid
$25
Fluid-sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$22
Fluid Tank
...odel fluid tank for download as obj, fbx, blend, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1335082)
3ddd
$1
Softline Fluid 274
...e , fluid
высота (см) - 65
высота седалища (см) - 30
глубина (см) - 105
длина (см) - 160
turbosquid
$5
Mana Potion Fluid
...
royalty free 3d model mana potion fluid for download as c4d on turbosquid: 3d models for games, architecture, videos. (1366155)
3d_export
$20
fluid crystal
...fluid crystal
3dexport
it is a one-man electric car, part of its components are made of glass
turbosquid
$40
SUN with fluid anim
... free 3d model sun with fluid anim for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1480698)
3d_ocean
$4
Detail Fluid Splash
...id liquid miscelaneus splash
high quality liquid splash generated with realflow and sculpted zbrush. comes in 3ds and obj models.