Thingiverse
Flow Constrictor by eussrh
by Thingiverse
Last crawled date: 3 years, 1 month ago
Expanded version of Flow Constriction thing 4774539 that also provides a funnel to route the water flow under the grow bed.
Aquaponics systems using autosiphons often need to have the waterflow rate tuned. Ball valves are a poor tool for doing this. This constrictor allow you to easily adjust the flow rate.
This is no different from https://www.thingiverse.com/thing:4774539 except that it allows the attachment of a funnel to the outlet. This funnel allows the waterflow to be sent to under the rocks so as to reduce splashing and subsequent algae buildup. Use of the funnel is completely optional.
This version is only sized for 1" or 30mm PVC pipes. PVC adapters can be used to fit other size pipes. Please see the instructions on how to assemble the constrictor. The basic system is a flow outlet (either 1" or 30mm) and a flow knob. The flow knob is attached to the flow outlet with either a #4 or m3 machine screw.
Optionally the funnel and splash guard can be used. The funnel comes in 1" and 30mm versions. The funnel is attached to the flow outlet with 2 self tapping screws (either #4 x 3/8 or M3x10mm).
Aquaponics systems using autosiphons often need to have the waterflow rate tuned. Ball valves are a poor tool for doing this. This constrictor allow you to easily adjust the flow rate.
This is no different from https://www.thingiverse.com/thing:4774539 except that it allows the attachment of a funnel to the outlet. This funnel allows the waterflow to be sent to under the rocks so as to reduce splashing and subsequent algae buildup. Use of the funnel is completely optional.
This version is only sized for 1" or 30mm PVC pipes. PVC adapters can be used to fit other size pipes. Please see the instructions on how to assemble the constrictor. The basic system is a flow outlet (either 1" or 30mm) and a flow knob. The flow knob is attached to the flow outlet with either a #4 or m3 machine screw.
Optionally the funnel and splash guard can be used. The funnel comes in 1" and 30mm versions. The funnel is attached to the flow outlet with 2 self tapping screws (either #4 x 3/8 or M3x10mm).
Similar models
thingiverse
free
Flow Regulator by eussrh
...de, so the flow outlets are designed for various size pvc pipes.
the same size flow knob works with all sizes of the flow outlet.
3dwarehouse
free
2" PVC Funnel
...l
3dwarehouse
this is a funnel to go into a 2" pvc pipe that is screwed to a wall. the pvc pipe has chicken feed in it.
thingiverse
free
3/4" to 1/2" PVC pipe clip by scooter_seh
...clip by scooter_seh
thingiverse
this clip is inserted into a 1/2" pvc pipe and allows it to clip on to a 3/4" pvc pipe
thingiverse
free
PVC clamp mount by bfulton
...riage bolts or drilling holes for t-nuts. the right side is extended for clearance for using knobs. we use 1/4"x20 hardware.
thingiverse
free
PVC Pipe Hanger for Spray Bottles
... for the following pipe sizes. scaling in the z axis is not recommended.
-(1/2)": 100%
-(3/4)": 125%
-(1.0)": 157%
thingiverse
free
Hydroponics Bulkhead / Drain + Hose coupling for 4" PVC by smysnk
...uot; pvc pipe designs:hydroponics 4" pipe clamp for use with 3mm paracordhydroponics net cup / pot system for 4inch pvc pipe
thingiverse
free
PVC Pipe Flange by Vetterick
... to any size.
i've included both the 2 and 4 screw version, the 2 screw works good on wall studs and more fit on the platter.
thingiverse
free
Vertical Paper Towel Holder - 1/2" PVC pipe by amandasubic
...have the normal round fitting. with that said, when this is printed, both pieces do secure very firmly to the 1/2" pvc pipe.
thingiverse
free
universal mini pixel tree -updated by Wilmar1006
...crews
10 small screws to catch the strap
pvc glue to attach the thread adapter
5/16 stud 1" or larger to mount the star base
thingiverse
free
1.25 PVC Schedule 40 Pipe Mount by BobBungalow
...25 pvc schedule 40 pipe mount by bobbungalow
thingiverse
for mounting 1.25" (1 1/4 inch) schedule 40 pvc pipe via 4 screws.
Eussrh
thingiverse
free
Conduit Junction by eussrh
... it holds the two pieces of conduit rigidly in place.
added a new right angle junction that can be used for end's or t's.
thingiverse
free
AutoTester by eussrh
...measurements. the new box has no slots, but is larger to keep the electronics cool. it should be printed using something opaque
thingiverse
free
Conduit Hook by eussrh
... the conduit. there is also a slot allowing you to secure it with a zip tie if you want, but i haven't found that necessary.
thingiverse
free
JamSentry by eussrh
...ions for 1.75mm and 3mm filament.
information on how it works and how to make one can be found at https://robogardens.com/?p=2220
thingiverse
free
Raft Letters by eussrh
...a-z that can be stuck onto the rafts (using the letter prongs) to identify the rafts.
the letters are about 1.5" (4cm) tall.
thingiverse
free
Drip Stake by eussrh
...iles. one is for a single stake. the other is for 11 stakes. the 11 stakes are designed to fit onto a 150mmx150mm printer bed.
thingiverse
free
Ridge Vent Frame by eussrh
...r threading zip ties through which can be used to further secure the conduit to the frame (although it is probably not necessary.
thingiverse
free
Seed starter for 1" grow cubes by eussrh
... inside a standard 11"x21" grow tray and each holder holds 64 grow cubes. print using food safe plastic (petg or hips)
thingiverse
free
Flow Regulator by eussrh
...de, so the flow outlets are designed for various size pvc pipes.
the same size flow knob works with all sizes of the flow outlet.
thingiverse
free
Angled Bowden Extruder v2 by eussrh
...nted at a downward tilt to make it easier to feed (see pictures). there are versions of the extruder for 1.75 and 3.0mm filament
Constrictor
3d_export
$65
Boar Constrictor 3D Model
...ort
snake viper mamba adder reptiles cold blood boa python constrictor animals
boar constrictor 3d model grafikdon 17364 3dexport
humster3d
$40
3D model of Boa Constrictor
...y a detailed 3d model of boa constrictor in various file formats. all our 3d models were created maximally close to the original.
3d_export
$149
boa constrictor - animated
...k provided in the text document. a total of 4 files are included in the package. they comprise of 2 rigged and 2 animated models.
cg_studio
$65
Boa Constrictor3d model
... model
cgstudio
.fbx .lwo .max .obj - boa constrictor 3d model, royalty free license available, instant download after purchase.
3d_export
$65
Python 3D Model
...snake viper mamba adder reptiles cold blood boa python constrictor animals python 3d model grafikdon 17363...
unity_asset_store
$35
Animated Boa Constrictor PBR
... dibia digital and speed up your game development process. find this & other characters options on the unity asset store.
thingiverse
free
bookmark-boa constrictor who has swallowed an elephant 'Little Prince
...lephant 'little prince
thingiverse
bookmark-boa constrictor who has swallowed an elephant from 'little prince' book.
thingiverse
free
Pendant-boa constrictor who has swallowed an elephant 'Little Prince'
...ant 'little prince'
thingiverse
pendant-boa constrictor who has swallowed an elephant from 'little prince' book.
thingiverse
free
Boa Constrictor Jar and Bottle Opener by Abybos
...deal for people with arthritis or hand impairment.
information:
it's necessary have to one gt2 belt 6mm.
working in progress.
Flow
turbosquid
free
Flow(Fluid/Flow)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Flow
...dd
flow , mdf italia , tessile
10 тыс.полигонов
turbosquid
$59
Blood Flow - Capilar flow
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
FLOW CHAIR and FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
FLOW CHAIR and FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
FLOW CHAIR and FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
FLOW CHAIR and FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
FLOW CHAIR and FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
FLOW CHAIR and FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Flow
...flow
3dexport