Thingiverse
Flite Test Mini Guinea Front and Rear Landing Gear (Fixed)
by Thingiverse
Last crawled date: 4 years, 4 months ago
These are parts to mount landing gear on the Flite Test Mini Guinea. They are meant to be used with the Flite Test medium landing gear wire and the 2" wheels for the rear gear and the Flite Test mini 1.1" wheel for the front gear. the front gear is NOT steerable, but much stronger then the steerable gear detailed in the official plans. The rear gear is a massive improvement from the design detailed in the official plans, it withstands the elements much better and can definitely take many more hard landings. I also included 2 spacers in the design, I would definitely use them if you are using the wheels recommended above, as it prevents them from scraping the side of the fuselage. The front gear is meant to be cross reinforced with small sized Popsicle sticks mounted in the 2 slots going across the mount.
When printed the hole may be too small for the wire, in this case, just mount a section of the wire in a vice or something similar. When mounted, wiggle the part onto the wire, making the hole large enough as you go.
When printed the hole may be too small for the wire, in this case, just mount a section of the wire in a vice or something similar. When mounted, wiggle the part onto the wire, making the hole large enough as you go.
Similar models
thingiverse
free
Flite Test Landing gear mount by muireenmoreeen
...ign. this is designed to work with 2mm-3mm landing gear wire, and uses four 4-40 screws and nuts to hold the two halves together.
thingiverse
free
Flite Test Storch Steerable Tail Wheel by StarkFlyer
... by hand (use a pin vise if available) because the plastic will melt if being too aggressive. i hot glued the parts to the plane.
thingiverse
free
Flite Test Mini Sportster Landing Gear Mount by sprintwrench
...wrench
thingiverse
i modified this landing gear mount to fit the mini sportster after the original worked so well on mini scout.
thingiverse
free
FT Mustang Mini Landing Gear
...ft mustang mini landing gear
thingiverse
landing gear for ft mini mustang of flite test
thingiverse
free
Landing gear mount for Flite Test FT Spitfire by pipi135
... shortened the length of the wire and bent the wheels further forward. works much better.
based on a wood mount i saw on youtube.
thingiverse
free
[Multicopter] Simple landing gear for 1/2 inch booms by FlohwZ
...ite test products.
if you want to use this in combination with the flite test camera tray, make sure to use the big
landing gear.
thingiverse
free
mini quadcopter landing gear by beark54
...it would hold up and so far it has not fallen off.
mini flame wheel quadcopter frame. (http://www.thingiverse.com/thing:34552)
thingiverse
free
FT (Flite Test) Sportster Tail Wheel Mount by flyingferret
... (diameter) wire used.
inn action works quite well, although i am only a rookie with landing gear.
https://youtu.be/2yrkbsgzoq8
thingiverse
free
Flite Test Minimotor Mount by Martinrome
...motor mount and small pod. i just hand drilled the side holes after printing with a 1/8 bit to male them fit the skewers exactly.
thingiverse
free
FT Guinea Pig Motor mount STL by canamar
... works well with the motors you will find in the ft power-pack c, you may need to enlarge the holes to fit some of the screws in.
Guinea
3ddd
$1
Guinea lampara
...guinea lampara
3ddd
guinea lampara
guinea lampara
3d_export
$39
guinea flag pack
...guinea flag pack
3dexport
3ddd
$1
thesofa&chaircompany GUINEA CARVER
... guinea carver
http://www.thesofaandchair.co.uk/collection/dining-chairs/2250-guinea-carver
3d_export
$9
Guinea flag 3D Model
...h rope realistic standard association organization goverment flag guinea emblem jpeg
guinea flag 3d model rmodeler 38255 3dexport
3d_export
$39
guinea bissau flag pack
...guinea bissau flag pack
3dexport
3d_export
$39
equatorial guinea flag pack
...equatorial guinea flag pack
3dexport
humster3d
$40
3D model of Guinea Pig
...d
buy a detailed 3d model of guinea pig in various file formats. all our 3d models were created maximally close to the original.
3d_export
$9
Equatorial Guinea flag 3D Model
...th rope realistic standard association organization goverment flag emblem
equatorial guinea flag 3d model rmodeler 38218 3dexport
turbosquid
$5
Flag of Guinea - Animated LOOP
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$16
Guinea pig (Cavia porcellus) Rigged
...rsion only: the model is rigged ( pelvis,head,legs,arms,hands,spine,head,feet). the main scene comes with mental ray materials...
Flite
thingiverse
free
Flite Sensor Enclosure by JEDVentures
...flite sensor enclosure by jedventures
thingiverse
3d print of flite sensor enclosure
thingiverse
free
Flite Display Enclosure by JEDVentures
...flite display enclosure by jedventures
thingiverse
3d print of flite display enclosure
thingiverse
free
Flite Sensor Enclosure by JEDVentures
...flite sensor enclosure by jedventures
thingiverse
3d print for flite sensor enclosure
thingiverse
free
Flite Headless Controller Enclosure by JEDVentures
...flite headless controller enclosure by jedventures
thingiverse
3d print for the flite headless controller enclosure
thingiverse
free
Flite Keg Tower Cap by JEDVentures
...flite keg tower cap by jedventures
thingiverse
replacement kegerator tower lid to mount the flite sensor display
thingiverse
free
Flite Test Power Pod Firewall by 3dRage
...flite test power pod firewall by 3drage
thingiverse
flite test firewall
thingiverse
free
Flite Test logo by ForbesFPV
...go by forbesfpv
thingiverse
flite test logo. printed like 15 % infill.
i used a 3d printer called the flash forge creator pro.
thingiverse
free
E-flite Su-30 Antenna by InTheTubeDeep
...e-flite su-30 antenna by inthetubedeep
thingiverse
antenna for e-flite su30
thingiverse
free
E-flite Su30 L WingScrape by InTheTubeDeep
...e-flite su30 l wingscrape by inthetubedeep
thingiverse
e-flite su30 l wingscrape
thingiverse
free
Flite Fest Keychain by Jerry_Fuller_0014
...simple flite fest logo in keychain form! you can either pause print halfway and change filament color or just color with a marker
Rear
3d_export
$48
engine case rear
...re efficient as it eliminates the need for the propeller shaft while the differential merges with the transmission to save space.
turbosquid
$39
rear rim
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Rear Suspension 3D Model
... suspension 3d model
3dexport
rear suspension spring sport car disc brake chasis
rear suspension 3d model bayazoff 30675 3dexport
turbosquid
$20
Rear sport wheel
...del rear sport wheel for download as ige, obj, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1227527)
turbosquid
$99
Rear tyre set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
Wet Rear tyre
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
Hard rear tyre
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
Medium Rear tyre
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
Supersoft Rear tyre
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
tractor rim rear
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Landing
3d_export
free
land
...land
3dexport
3d_export
$20
land rover
...land rover
3dexport
land rover
3d_export
$65
landing
...landing
3dexport
simple rendering of the scene file
3ddd
free
Land Bond
... тумба
land bond-авторская коллекция мебели жана франсуа роле.сделана из натуральной древесины.
3ddd
$1
Land Bond
...land bond
3ddd
land bond-авторская коллекция мебели жана франсуа роле.
3ddd
$1
Land Bond
...land bond
3ddd
land bond-авторская коллекция мебели жана франсуа роле
3ddd
free
dream land / sicilia
...dream land / sicilia
3ddd
dream land
dream land sicilia
3ddd
$1
Dream Land / Монтсеррат
...dream land / монтсеррат
3ddd
dream land , капитоне
производитель: dream land
design_connected
$29
Land Sofa
...land sofa
designconnected
alivar land sofa computer generated 3d model. designed by bavuso, giuseppe.
design_connected
$27
Land Meridiana
...land meridiana
designconnected
bonaldo land meridiana computer generated 3d model. designed by crs bonaldo.
Gear
3d_ocean
$4
Gears
...gears
3docean
gear gears iron
4 different size of gears
3d_export
$5
gear
...gear
3dexport
gear
3d_export
free
Gears
...gears
3dexport
gears
3d_export
$5
gear
...gear
3dexport
a simple model of gear
3d_export
$5
gear
...gear
3dexport
gear for transmission , case machine
3d_ocean
$3
Gears
...nical parts process steampunk vehicle wheel work
10 different gear models volume 01-10 files: .3ds .c4d .obj note: you need vray
3d_ocean
$1
Spur Gear
...spur gear
3docean
decoration gear
a typical spur gear
3d_ocean
$4
Gear wheels
...gear wheels
3docean
engine engineering gear gears industry machinery mechanical toothwheel wheel
pair of gear wheels : animated.
turbosquid
$9
Gear
...gear
turbosquid
royalty free 3d model gear for download as on turbosquid: 3d models for games, architecture, videos. (1712328)
turbosquid
$2
Gears
...rs
turbosquid
royalty free 3d model gears for download as ma on turbosquid: 3d models for games, architecture, videos. (1166710)
Mini
turbosquid
$10
Mini Mini Luceplan
...
royalty free 3d model mini mini luceplan for download as max on turbosquid: 3d models for games, architecture, videos. (1227359)
3d_ocean
$39
Mini Cooper
...mini cooper
3docean
cabrioler cooper mini
mini cooper cabrioler
3d_export
$30
Mini lathe
...mini lathe
3dexport
mini lathe
3d_export
$5
mini mouse
...mini mouse
3dexport
mini mouse
3d_export
$5
mini house
...mini house
3dexport
mini house
3d_export
free
Mini Mecha
...mini mecha
3dexport
concept of mini mecha
3d_ocean
$20
Mini Gun
...mini gun
3docean
gatling gun gun machine gun mini gun weapon
model of a mini gatling gun.
3ddd
free
Herve mini
... кофейный , herve
http://www.mobiliavenanti.it/ru/products/hervè-mini
3d_export
$5
mini wall
...mini wall
3dexport
mini wall for living room
3d_export
$5
mini bank
...mini bank
3dexport
mini bank 3d model
Fixed
3ddd
$1
Fixed Gear Велосипед
... fixed , bicycle
классический шоссейный велосипед, переделанный под fixed gear.
design_connected
$16
Idée fixe
...idée fixe
designconnected
jacco maris idée fixe computer generated 3d model. designed by maris , jacco.
3d_export
$5
fixing scale knob
...fixing scale knob
3dexport
fixing scale knob
turbosquid
$10
Mini Fix
...bosquid
royalty free 3d model mini fix for download as sldas on turbosquid: 3d models for games, architecture, videos. (1581558)
turbosquid
$49
fixed bike
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Fixed Bicycle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Bag Fixed
...bag fixed
3ddd
чемодан
a bag model by me
3ddd
$1
Кресло BEAU FIXE
...fixe
3ddd
beau fixe , ligne roset
кресло beau fixe:
w 80 cm d 106 cm h 97 cm sh 43,5 cm
turbosquid
free
Crowbar "Fixed"
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Fixed gear
...fixed gear
3ddd
велосипед
шоссейный велосипед с фиксированной передачей
Front
archibase_planet
free
Front
...front
archibase planet
facade front bluff
front 3d01a - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
front fork
...front fork
3dexport
front fork
3d_export
$5
Front Desk
...front desk
3dexport
modern and minimal reception front desk
3d_ocean
$4
Medical Front
...medical front
3docean
horror low medical
medical front
3d_ocean
$5
Front Desk
...front desk
3docean
desk front office reception
office reception counter or front desk. cad file and obj file included.
3ddd
free
Axor WaterDream by Front
...r , waterdream , front
axor waterdream by front
3d_export
$5
front nut eye
...front nut eye
3dexport
front nut eye
3d_export
$5
front screw eye
...front screw eye
3dexport
front screw eye
3d_export
$5
front clamping device
...front clamping device
3dexport
front clamping device
archive3d
free
Front 3D Model
...rchive3d
facade front bluff
front 3d01a - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Test
turbosquid
$99
test
...st
turbosquid
royalty free 3d model test for download as max on turbosquid: 3d models for games, architecture, videos. (1251637)
turbosquid
$63
TEST
...st
turbosquid
royalty free 3d model test for download as max on turbosquid: 3d models for games, architecture, videos. (1446233)
turbosquid
$1
test
...st
turbosquid
royalty free 3d model test for download as fbx on turbosquid: 3d models for games, architecture, videos. (1360941)
3d_export
free
johnny test
...johnny test
3dexport
johnny test 3d
turbosquid
$15
Test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Test
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
gripper test
...gripper test
3dexport
robot gripper test model