Flight controller spacer mount for ZMR250 by Patrick_Mahoney

Last crawled date: 3 years ago

Creates a spacer with an insulator between layers on the 32mm holes where you mount a flight controller or a 4-in-1 ESC on a ZMR250 or similar frame. Use nylon screws and nuts to hold it down. In particular, I made these for my frame so that I could stack a CC3D flight controller onto a 4-in-1 ESC and make sure neither touched the other.
There's an "H" and a square shape to work around components and plugs that stick out. Use whichever shape fits better.
I included the OpenSCAD files for people to customize to work around electronics on their flight controller or ESC.
Added two more stand-offs that I used. One is for a ReadyToFlyQuads.Com 4-in-1 ESC and the other is for a Flip32+. The "outside square" one tries to make a picture-frame like spacer to work around components.
I put these on my new ZMR250 with the 4-in-1 ESC and the Flip32 and the stack looks tight and the wiring is minimal. I really like it.