Thingiverse
Flashforge Dreamer - Side loader Filament Spool Holder - Thicker Hangers by BetaCygni
by Thingiverse
Last crawled date: 3 years, 1 month ago
The original side loader arm worked great until the stress on the corner of the hook caused it to break.
I modified the original loader arm file using 3D Builder to make it thicker so it (hopefully) won't break again.
Only the part near the hook has been thickened from 5mm to7.5mm.
The end of the arm where the rod goes that holds the reel is still 5mm so the rods that are part of the project will still work.
There are two mirror image arms because the thicker part of the hook is only one one side.
My original prints were in ABS. I printed the thicker print in PETG.
I modified the original loader arm file using 3D Builder to make it thicker so it (hopefully) won't break again.
Only the part near the hook has been thickened from 5mm to7.5mm.
The end of the arm where the rod goes that holds the reel is still 5mm so the rods that are part of the project will still work.
There are two mirror image arms because the thicker part of the hook is only one one side.
My original prints were in ABS. I printed the thicker print in PETG.
Similar models
thingiverse
free
Curtain Ring Hook by Archicens
...nal (left) and the printed version (right).
the printed hook should be carefully clipped onto the ring, otherwise it might break.
thingiverse
free
Shoe case holder fix (IKEA BISSA) by commonslabgr
...holds the shoes drawer in the shoe case. the original ones break easily so i designed it with a thicker base and they work great.
thingiverse
free
Skullcandy Crusher Wireless Anti-layerseparation replacement part (original by yazjack) by ichhalt159753
...s version.
one side is flat to print them sideways (did some retopogy aswell) and now they're holding it together quite well.
thingiverse
free
Rollerstruder: filament feeder by MoonCactus ( Separated ) by elephanten
...ithout breaking it. so i divided them in rhinoceros. hope this helps someone.
note: files include only the base and the arm part.
thingiverse
free
Millennium Blades Thick Insert by Yakandjak
...t by yakandjak
thingiverse
i printed 3 of these thicker walled boxes (thicker by .5mm on each long side) and 1 of the thin ones.
thingiverse
free
Shower Rod Washcloth holder by derrabe
...ut could slip off if bumped so i redesigned the cloth holding end to be more hook-like and made it a little thicker for strength.
thingiverse
free
Dishwasher pods/tablet basket by pesekr
...d pla by fiberlogy.
please don't forget to use support for the hooks and i recommend to use support also on sides with holes.
thingiverse
free
Self-closing drawer slide catch by Kombolasha
...es of the drawer. originally, the teeth were raised on both sides of the part, but i only raised one side so i can print it flat.
thingiverse
free
Multi size lens cap holder by lllloydo
...
i printed the original as a gift for my mother. she told that one of the arms broke, so i've made the arms a little thicker.
thingiverse
free
Replacement/Upgrade Gear for Airsoft Odin Style Speed Loaders by DJMitch117
...ne of these in amazon pla using my creality cr-6 se and it seems to be holding up fine. would be best printed in abs i imagine.
Dreamer
3ddd
$1
Desiree dreamer
... dreamer
фабрика - desiree
коллекция - dreamer
описание - кресло
сайт -http://www.euromobil.com
3ddd
$1
Desiree - Dreamer
...коллекция dreamer
кресло
90 cm x 73cm x 66 cm (h)
присутствует файл для cinema 4d с настроенными материалами для corona render.
3d_export
$5
EcoMan Dreamer 3D Model
...rt
ecoman dreamer
ecoman dreamer 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl anatoliy.stil16496 102845 3dexport
turbosquid
$24
L Dreamer Couch.
...model l dreamer couch. for download as max, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1561495)
turbosquid
$20
Porcelain statuette (dreamer)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Eco creatures Dreamer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Window "Dreamer"
... подушка
окно "мечтатель" - многофункциональная модель на основе профиля rehau. 3 режима.
3d_export
$8
cyberpunk - dreamer underwear set a
...ontacted through my email and my facebook page. email: azazel_d2@hotmail.com facebook: https://www.facebook.com/reaperproductions
3d_export
$8
cyberpunk - dreamer underwear set b
...ontacted through my email and my facebook page. email: azazel_d2@hotmail.com facebook: https://www.facebook.com/reaperproductions
3d_export
$8
cyberpunk - dreamer underwear set c
...ontacted through my email and my facebook page. email: azazel_d2@hotmail.com facebook: https://www.facebook.com/reaperproductions
Flashforge
thingiverse
free
Flashforge Logo
...flashforge logo
thingiverse
flashforge logo
thingiverse
free
flashforge logo by morive3d
...flashforge logo by morive3d
thingiverse
this is a flashforge stamphttps://www.youtube.com/channel/ucu6ge9qrju9cpgg6wrlxkqw
thingiverse
free
Flashforge Glass Bed by olo2000pm
...flashforge glass bed by olo2000pm
thingiverse
flashforge glass bed
thingiverse
free
Toolbox for FlashForge Finder by Gringo1970
...toolbox for flashforge finder by gringo1970
thingiverse
smal toolbox for flashforge finder
thingiverse
free
Flashforge / Dremel lid by Disco_Rob
...flashforge / dremel lid by disco_rob
thingiverse
lid extension for the flashforge dreamer
thingiverse
free
Flashforge Dreamer Filamentguide by PeterS1
...de for flashforge dreamer / dremel idea. you need also flashforge dreamer lid spacer (http://www.thingiverse.com/thing:1219953)
thingiverse
free
Flashforge creator legs by cybadigitals
...flashforge creator legs by cybadigitals
thingiverse
these legs gives a clearance of 25mm for flashforge creator series
thingiverse
free
Flashforge Inventor/Dreamer by Iprintr7
...orge inventor/dreamer by iprintr7
thingiverse
this is my first thingiverse project and is a model of the flashforge 3d printer
thingiverse
free
Flashforge Filiment Guide by russellscanlan
...flashforge filiment guide by russellscanlan
thingiverse
my design to feed filament through the door on a flashforge adventure 3
thingiverse
free
Flashforge Winder Adapter by newky2k
...winder adapter by newky2k
thingiverse
adapters for the flashforge 0.5 kg spools to the for the filament spool winder by ssinnott
Loader
3d_export
$5
Loader
...loader
3dexport
knuckleboom forest machine loader 3d model
turbosquid
$50
loader
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
loader
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Loader 3D
...loader 3d
3dexport
the loader is made in 3d. simple materials are superimposed.
3d_export
$50
wheel loader
...g the job site, digging, carrying heavy loads, or moving materials.<br>modeled in solidworks.<br>rendered in keyshot.
3d_export
$10
Loader 3D Model
...loader 3d model
3dexport
loader vehicle tools yellow
loader 3d model poctob 81233 3dexport
archive3d
free
Loader 3D Model
...model
archive3d
loader boot drive
loader small 200807 - 3d model for interior 3d visualization.
3d_export
$17
wheel loader
...wheel loader
3dexport
3d_export
$15
wheel loader
...wheel loader
3dexport
3d_export
$10
wheel loader
...wheel loader
3dexport
Thicker
3d_ocean
$3
Film Reel - 5-Holed Film Reel 3D Object
...(and five smaller inner ones), with stylised embossing and thicker rim. great for motion titles, image rendering,...
3d_export
$12
signet ring 3d print model
...an overlay from my model, it will be slightly thicker than mine. and if you do it completely without...
3d_export
$10
iphone 13 pro pro max 2021
...leaks. the final product will feature a lens redesign, thicker body and a controversal fully portless design. the notch...
3d_export
$30
Boeing 747
...is lengthened compared to the 747-400; the wing is thicker and deeper, holding more fuel, and wider with raked...
3d_export
$7
pipe cutter
...and tubes, such as sprinkler pipe. for use on thicker pipes, there is a pipecutter with a sharp wheel...
3d_export
$13
mast light sailing boat
...often built of a size requiring masts taller and thicker than could be made from single tree trunks. on...
3d_export
$10
pipe cutter
...and tubes, such as sprinkler pipe. for use on thicker pipes, there is a pipecutter with a sharp wheel...
thingiverse
free
Thicker Batflake by engineer51e
...thicker batflake by engineer51e
thingiverse
i just made it thicker.
thingiverse
free
thicker version by Finch666
...thicker version by finch666
thingiverse
thicker version, my original got warped under tension.
thingiverse
free
thicker pusher by patooyee
...se
i found that the original pusher base was a little too thin and often bound up. i made it thicker and it works like a charm.
Hangers
3d_export
$5
hanger
...hanger
3dexport
hanger
archibase_planet
free
Hanger
...hanger
archibase planet
hanger coat hanger holder
hanger n260612 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Hanger
...hanger
3dexport
old-fashioned hanger of georgia
3ddd
$1
Hanger
...hanger
3ddd
вешалка
classic black hanger
archibase_planet
free
Hanger
...hanger
archibase planet
hanger hall-stand rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger rack peg
hanger n210712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger rack sanitary ware
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hall-stand rack hanger
hanger n250711 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger hall-stand rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Spool
3ddd
$1
spool c53301
...spool c53301
3ddd
spool
spool c53301 650х350х145
turbosquid
$3
Cable Spool
...royalty free 3d model cable spool for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1457009)
turbosquid
free
Pallets and Spool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Spool of String
...ol of string pink for download as c4d, 3ds, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1647892)
3ddd
$1
Подвесные светильники Spool
...ye/podvesnoy_svetilnik_spool_d320/ http://www.cosmorelax.ru/catalog/podvesnyye/podvesnoy_svetilnik_spool_d420/
3ddd
free
Spool 001 sofa
...spool 001 sofa
3ddd
roda
roda
collection spool
design rodolfo dordoni
dimensions:
lenght 90 cm
depth 94 cm
height 79 cm
turbosquid
$15
Roda Spool Sofa
...ee 3d model roda spool sofa for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1502650)
turbosquid
$95
wire spools 3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
spool of TV wire
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Simple and Fast Spool Holder
...ree 3d model simple and fast spool holder for download as stl on turbosquid: 3d models for games, architecture, videos. (1548546)
Filament
3ddd
$1
Filament Cage
...filament cage
3ddd
лофт , filament cage
модель бра, делалась по фото!
turbosquid
$3
FILAMENT COUNTER
...d
royalty free 3d model filament counter for download as stl on turbosquid: 3d models for games, architecture, videos. (1563049)
3d_export
$5
Filament lamp 3D Model
...filament lamp 3d model
3dexport
filament lamp 3d model kevin 54161 3dexport
3d_export
$5
Filament bulb candle 3D Model
...filament bulb candle 3d model
3dexport
filament bulb-candle
filament bulb candle 3d model kevin 54163 3dexport
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3ddd
$1
Factory filament metal shade
...factory filament metal shade
3ddd
restoration hardware
restoration hardware. 20th c. factory filament metal shade.
Holder
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Side
3ddd
free
Side-by-side холодильник
...side-by-side холодильник
3ddd
холодильник
side-by-side холодильник samsung
turbosquid
free
siding
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кресло Side
...ресло side
3ddd
side , eero saarinen
eero saarinen кресло side.
материалы corona render.
turbosquid
$15
Mausoleum Entrances Lined Side By Side
...model mausoleum entrances lined side by side for download as on turbosquid: 3d models for games, architecture, videos. (1696515)
3ddd
$1
Side-by-Side SHARP SJ-F78PEBE
... холодильник
холодильник side-by-side sharp sj-f78pebe, габариты (шxгxв) 89x77x183 см, с материалами
3ddd
$1
Liebherr Refrigerator Side By Side Sbes 7165
... side sbes 7165
3ddd
liebherr , холодильник
liebherr refrigerator side by side sbes 7165
3ddd
$1
Side table
...side table
3ddd
журнальный
classic side table
3ddd
$1
Зеркало Side
...зеркало side
3ddd
винтаж , зеркало
зеркало side
3ddd
$1
Side Table
...side table
3ddd
кофейный , круглый
side table
3ddd
$1
Side table
...side table
3ddd
приставной
bed side table, coffee table