FlashForge Creator Pro LED RGB Board (RGBBoard) Drop Mount by gsp4msl

Last crawled date: 3 years, 4 months ago

I love my FlashForge Creator Pro all but for one thing... When it's printing, the extruders cast an annoying shadow from the angled RGB Led Board.
This simple "pimp" offers an alternative mounting solution for the LED RGB Board which uses 2 of the original M3 x 16mm socket cap head screws.
It allows you to drop the RGBBoard (after removing the cable from its P-Cilp) in order to "shine the light" on the live extruder action.
In addition, this "pimp" offers clips in the original position so you can simply move the RGBBoard from "in action" to "original" mode.
Please enjoy and please don't be too harsh on my first share. Thank you :)
2020-11-22 Update...
I have now included a "Flip" version so, not only can you move the LED strip to its original position, but in addition you can Flip up the legs, out of view :)
Once printed, carefully remove supports and use a fine file for smoothing any blips.
To assemble, just find yourself a medium sized safety pin to use as a pivot. The ones shown in the picture measure about 27mm long with a 0.7mm wire width.
Happy printing :)