FJ Cruiser Body for MyRCCar 1/10 Truggy Build by dlb5

Last crawled date: 3 years ago

Hi all!!!
From now on, if you are interested in the parts of this publication, please contact me through MyMiniFactory
This time I "re-publish" this thing for MyRCCar 1/10 Truggy Build rc car. I made 3 new linkages to fit the new position and shape of butterflys and modifyed the front mudgards to fit the new servo position.
The key of this body is its composed of soft and hard materials, same as us ;) All that you can see in blue color in the photos is TPU material. Also i bought some black TPU and the new linkages for MyRCCar Truggy are in this black TPU.
It has many parts and this is bad and good. You can print them in a bunch or one by one, but you can paint them independently or choose different materials to do them.
I'll try to provide next a list of screws and some other extra materials needed.
All the parts should fit in a 200x200x200 3d printer. The largest ones are the top ob the body, divided in 2 halfs and must be printed in the diagonal ob the bed. to join this 2 parts you will need two or three pieces of 3mm piano wire and 100mm length.
I'll try to add some video soon of the car with this body so you can see what can you expect from it. As you can see in the photos, car, wheels and body are heavy, heavy plastic, not heavy metal :P
All needed screws are M3 but the two for the rear linkage, they are M4x30 and also uses 2 M4 nuts. It uses a few M3x30 screws, maybe 12 or more. Try to provide you with a variety from 8, 10, 12, 16, 20 and 30 mm long M3 screws, sure you will use them with time ;)
If you want to know more, and maybe give it a try to the tandem FJC+MRCC, please join the MyRCCar Group.
Hope we see you there!!!