Thingiverse
fit
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is a simple tiny test print to see if you can get one part to fit inside the other given the given tolerance (default at 0.1mm). It also helps tune flow rate, output size, etc. The print is almost as instant as you can get for a calibration print.
The small hexagon is 3mm high and 10mm in diameter (tip to tip) .
The larger hexagon is 3mm high, 20mm in diameter (tip to tip) and 17.3mm from flat wall to opposite wall.
I do not recommend using this to calibrate Z steps/mm. Use other methods to calibrate that.
The small hexagon is 3mm high and 10mm in diameter (tip to tip) .
The larger hexagon is 3mm high, 20mm in diameter (tip to tip) and 17.3mm from flat wall to opposite wall.
I do not recommend using this to calibrate Z steps/mm. Use other methods to calibrate that.
Similar models
thingiverse
free
Calibration Hexagon
...ibration hexagon
thingiverse
for delta printer calibration.
outer wall dimension is 20mm.
innen diameter is 10mm.
height is 5mm.
thingiverse
free
Diameter Calibration for Holes and Bosses on Replicator 2 by pcdangio
...s and run your own calibration for other slicers.
see the instructions section for more detail on the process & excel file.
thingiverse
free
Custom interchangeable plier tips by econopotamus
...u might have as you can build from it. i used abs so i can also bond other shapes and things to the tips with acetone if desired.
thingiverse
free
Hexagon Yasmin guide; with standoffs by Asgar_
...have to print the clips at 100% scale, for a bit more lose fit, but easier set up you would like to print the clips on 95% scale.
thingiverse
free
Diameter Calibration Object by degroof
...rating 3d printers. takes about 4 minutes to print on a makerbot, allowing for quick iterations while adjusting print parameters.
thingiverse
free
Orthex 223 Baseplate by Hutasu
..., 3d-model has 101.25mm diameter so it's a loose fit and wouldn't require very precise or calibrated printer necessarily.
thingiverse
free
3mm Machine Screw Gauge by jrobertfox
...sically i used this to determine the right sizes for 3mm screw hols and corresponding nut slots. just print it and see what fits!
thingiverse
free
608 bearing calibration set by filotto78
... fit your bearing. you can decide the right diameter to achieve the choosen "degree of interference" for your projects.
thingiverse
free
Smart Calibration Cube 40x40x20mmx0.8mm - You can use it like Small Storage Cube Box with Lid
...calibration box dimensions:
outside: x: 40mm, y: 40mm z: 20mm
inside: x: 38.4mm, y: 38.4mm z: 19.2mm
walls: 0.8mm, bottom:0.8mm
thingiverse
free
Hexagon stencil for Dungeons and Dragons (customisable) by tomasstorck
...ve and should help you to customise or modify the model. also included is a rendered stl file that fits nicely on an ender 3 v2.
Fit
turbosquid
$21
Fitting
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
fitness
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Fitness
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
fitness
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
fittings
...fittings
3dexport
low poly 3d model for games
3d_export
$5
fittings
...fittings
3dexport
low poly 3d model for game
3d_export
$30
pipe fit
...pipe fit
3dexport
this models basically used for pipe fitting
3d_ocean
$19
Fitting room
...m fitting fitting room furniture interior materials photorealistic restaurant table textured wardrobe
fitting room with textures.
turbosquid
free
Fitness equipment, technogym tools, fitness ball
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
ITRE FIT
...itre fit
3ddd
itre
itre fit, моделировалась по фото. высота 800 мм, диаметр одного - 130 мм.