GrabCAD
Filament Spool Winding Handle
by GrabCAD
Last crawled date: 1 year, 11 months ago
This winding handle can be fitted to the side of an empty filament spool which can then be used to hold filament samples. The handle makes it easier to spin the spool and wind the filament into place.
Drill a 10mm hole in the filament spool making sure that the handle, when fitted, will be inside the diameter of the spool. You may need to make the hole slightly larger to fit the spindle through - wiggle the drill a bit!
Superglue both halves of the spindle together.
Insert the spindle through the hole and add a couple of spots of superglue to the inside of the spindle cap to fix it to the filament spool.
Snap the handle into position.
Use your spool holder on your printer to wind filament onto the spool.
Printing the spindle in two halves, with the joining surface flat on the bed, will ensure the layers of the print will be orientated to give a stronger spindle when it is squeezed to attach the handle.
I have included the full version of the spindle should you wish to avoid glueing the halves together.
Drill a 10mm hole in the filament spool making sure that the handle, when fitted, will be inside the diameter of the spool. You may need to make the hole slightly larger to fit the spindle through - wiggle the drill a bit!
Superglue both halves of the spindle together.
Insert the spindle through the hole and add a couple of spots of superglue to the inside of the spindle cap to fix it to the filament spool.
Snap the handle into position.
Use your spool holder on your printer to wind filament onto the spool.
Printing the spindle in two halves, with the joining surface flat on the bed, will ensure the layers of the print will be orientated to give a stronger spindle when it is squeezed to attach the handle.
I have included the full version of the spindle should you wish to avoid glueing the halves together.
Similar models
grabcad
free
Filament Spool Spindle
...
filament spool spindle (middle) for pla filament spools. center hole fits a 5/16" bolt.
our first publicly shared model.
grabcad
free
Spool Hub
...th the printer. the spool now turns smoothly as the printer pulls in the filament, instead of the hopping the spool used to make.
grabcad
free
Filament Hole Protector 12.5mm
... black filament, with 0.2mm layer height and 100% infill on a prusa i3 mk3s printer.
i hope you can find this print useful, too.
grabcad
free
Filament Hole Protector
... black filament, with 0.2mm layer height and 100% infill on a prusa i3 mk3s printer.
i hope you can find this print useful, too.
grabcad
free
Dremel Filament Winder
...spool with 18-22 mm hole and hole length between 20 and 32 mm. works when printed in pla with -0.05mm horizontal offset in cura.
grabcad
free
Universal stand-alone filament spool holder (Fully 3D-printable)
...ou need a new filament spool holder, just 3d-print one! :)
instructions
http://bit.ly/1z5hr5t
video
http://youtu.be/x6arzewysze
grabcad
free
Filament Protector
... black filament, with 0.2mm layer height and 100% infill on a prusa i3 mk3s printer.
i hope you can find this print useful, too.
grabcad
free
Actobotics Gear Shroud
...r, you can fasten them at the holes in the edges with 6-32 screws and lock nuts. make sure you print both halves of these to use.
grabcad
free
GameBall Trackball Mount
...ts for easy printing without supports. use 1.75mm filament in the two holes to provide alignment while you superglue it together.
grabcad
free
Filament spool for samples
...spool for filament samples. print both parts and glue together.
in the picture you see a 50g 1.75mm filament sample on the spool.
Spool
grabcad
free
Spool
...spool
grabcad
spool
grabcad
free
Spool
...spool
grabcad
spool
grabcad
free
spool
...spool
grabcad
spool
grabcad
free
spool
...spool
grabcad
spool
grabcad
free
Spool
...spool
grabcad
spool
grabcad
free
Spool
...spool
grabcad
spool
grabcad
free
SPOOL
...spool
grabcad
piping spool
grabcad
free
SPOOL
...spool
grabcad
spool for 3dprinter
grabcad
free
Spool
...spool
grabcad
spool for filament
grabcad
free
spool
...spool
grabcad
spool just started
Filament
grabcad
free
Filament
...filament
grabcad
basite indirgenmiş bir filament
grabcad
free
Filament cleaner
...filament cleaner
grabcad
cleans the filament to avoid any problems with filament while printing
grabcad
free
Filament holder
...filament holder
grabcad
filament holder
grabcad
free
Filament spool
...filament spool
grabcad
filament spool
grabcad
free
filament spool
...filament spool
grabcad
filament spool
grabcad
free
Filament Guide
...filament guide
grabcad
filament guide
grabcad
free
FILAMENT BOX
...filament box
grabcad
filament box
grabcad
free
Filament Holder
... not safe for a filament holder because when the filament gets stuck anywhere, the filament holder disc can come out of the slot.
grabcad
free
filament carrier
...filament carrier
grabcad
.... here a filament carrier for 1 kilogram filament ...
more patterns to follow ....
step, igs, stl
grabcad
free
Filament Clip
...filament clip
grabcad
filament spool clips
suitable 1.75mm filament. planned to hold tight on different rolls thickness.
Winding
grabcad
free
wind
...wind
grabcad
wind
grabcad
free
Wind Pump
...wind pump
grabcad
wind pump use for wind generation
grabcad
free
Wind Sock
...wind sock
grabcad
wall mount wind sock to indicate the wind direction.
grabcad
free
Wind Turbine
...wind turbine
grabcad
the wind turbine is used to extract power from wind energy..
grabcad
free
Wind Turbine
...nd turbine designed by solidworks. a wind turbine is a device that converts the wind's kinetic energy into electrical energy.
grabcad
free
wind
...wind
grabcad
ow
grabcad
free
Wind
...wind
grabcad
for fiver
grabcad
free
wind turbine
...wind turbine
grabcad
wind turbine it is a machine that extarct the energy from wind to convert it to electricity
grabcad
free
Wind Turbine
...wind turbine
grabcad
a wind turbine is a device that converts the kinetic energy of wind into electrical energy.
grabcad
free
Wind Türbine
...wind's kinetic energy into electrical energy. wind turbines are manufactured in a wide range of vertical and horizontal axis.
Handle
grabcad
free
Handle
...handle
grabcad
a handle to 3d print. can be used as door handle or such
grabcad
free
Handle
...handle
grabcad
handle
grabcad
free
Handle
...handle
grabcad
handle
grabcad
free
handle
...handle
grabcad
handle
grabcad
free
handle
...handle
grabcad
handle
grabcad
free
handle
...handle
grabcad
handle
grabcad
free
handle
...handle
grabcad
handle
grabcad
free
handle
...handle
grabcad
handle
grabcad
free
Handle
...handle
grabcad
handle
grabcad
free
Handle
...handle
grabcad
handle