Filament Shelf Bracket With Divider/Endstop and Labels for USA 1"x2" by michelluccote

Last crawled date: 3 years, 1 month ago

I adjusted the original bracket to instead have a 19.5mm spacing so it fits US 1x2 wood which is really 3/4 by 1 1/2 inches in size.
I then added a divider that can be screwed from the bottom. This can be placed anywhere along the wood support but is mostly meant to be added at the ends to avoid spools from falling off.
Finally I made a set of labels. Each is really in two parts. First you have the label holder which is the piece that fits over the wood beams. Then you have each label type that can snap into the label holders. They are a tight fit but once in they don't accidentally come out. I made them in two parts so I could print the holder in black and the label in white. Then the text really stands out when done this way. I included a blank label if you want to write or stick something on instead. I've included labels for PC, PLA, PETG, ASA, ABS and TPU.