Cults
Filament Sensor Case & Setup Info/Settings
by Cults
Last crawled date: 6 years, 1 month ago
There's very little info online regarding how to wire a filament runout sensor properly on "compound motherboards". Schematics barely exist, are outdated, or simply doesnt have data you seek. So i hope to help by keeping it simple.
This applies to motherboards out there like my OSOYOO MKS Base v1.5 board and my Hictop red MPX .3
Made this to work with regular end-stops micro switches.
(This may work with regular ramp boards, but i dont have one to look closely and or personally confirm, all my boards are the "compound, all in one" motherboards)
Hardware needed:
Endstop microswitch with pigtail connector
Four 3mm x 1.5mm magnets
M3 x 5mm screw
M3 Nut
Software side of things:
This applies to Marlin!! Specifically the latest version as of 7/20/17 (v1.1.4)
There's 3 changes that must take place:
(1) Enable filament runout sensor on Config.h
(2) Enable advanced pause and adjust values to what you want your machine to do
(3) Make sure the right pin is used by firmware
Change #1
Edit configuration.h
You must enable the filament runout sensor, scroll down and enable the setting. Should look something like this:
#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensor. Set to true for the red mechanical end-stops
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
#define FILAMENT_RUNOUT_SCRIPT "M600"
#endif
Change #2
Edit configuration_adv.h
You must enable Adanced pause feature
( This are MY settings... Change the values to whatever you deem appropiate for your machine!!)
#define ADVANCED_PAUSE_FEATURE
#if ENABLED(ADVANCED_PAUSE_FEATURE)
#define PAUSE_PARK_X_POS 3 // X position of hotend
#define PAUSE_PARK_Y_POS 3 // Y position of hotend
#define PAUSE_PARK_Z_ADD 3 // Z addition of hotend (lift)
#define PAUSE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
#define PAUSE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
// It is a short retract used immediately after print interrupt before move to filament exchange position
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
#define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // Unload filament length from hotend in mm
// Longer length for bowden printers to unload filament from whole bowden tube,
// shorter length for printers without bowden to unload filament from extruder only,
// 0 to disable unloading for manual unloading
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
// Short or zero length for printers without bowden where loading is not used
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 0 // Extrude filament length in mm after filament is loaded over the hotend,
// 0 to disable for manual extrusion
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
// or until outcoming filament color is not clear for filament color change
#define PAUSE_PARK_NOZZLE_TIMEOUT 900 // Turn off nozzle if user doesn't change filament within this time limit in seconds
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
#endif
Change #3
Make the software use the right pin on motherboard.
Scroll down the tab and look for the below code.
Here is where you will change the value to match the pin your using.
In both of my OSOYOO MKS Base v1.5 and Hictop red MPX .3 i had open pins near the end stops with a label D11. Theres 3 pins, SIGNAL - NEG - POS.
I used D11 because i wasnt able to find any online information regarding the proper pin 4 Marlin calls for.
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
#define FIL_RUNOUT_PIN 11 // Stock setting was 4. Changed to 11 for pin D11 on the motherboard.
This works even when using Octoprint.
This applies to motherboards out there like my OSOYOO MKS Base v1.5 board and my Hictop red MPX .3
Made this to work with regular end-stops micro switches.
(This may work with regular ramp boards, but i dont have one to look closely and or personally confirm, all my boards are the "compound, all in one" motherboards)
Hardware needed:
Endstop microswitch with pigtail connector
Four 3mm x 1.5mm magnets
M3 x 5mm screw
M3 Nut
Software side of things:
This applies to Marlin!! Specifically the latest version as of 7/20/17 (v1.1.4)
There's 3 changes that must take place:
(1) Enable filament runout sensor on Config.h
(2) Enable advanced pause and adjust values to what you want your machine to do
(3) Make sure the right pin is used by firmware
Change #1
Edit configuration.h
You must enable the filament runout sensor, scroll down and enable the setting. Should look something like this:
#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensor. Set to true for the red mechanical end-stops
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
#define FILAMENT_RUNOUT_SCRIPT "M600"
#endif
Change #2
Edit configuration_adv.h
You must enable Adanced pause feature
( This are MY settings... Change the values to whatever you deem appropiate for your machine!!)
#define ADVANCED_PAUSE_FEATURE
#if ENABLED(ADVANCED_PAUSE_FEATURE)
#define PAUSE_PARK_X_POS 3 // X position of hotend
#define PAUSE_PARK_Y_POS 3 // Y position of hotend
#define PAUSE_PARK_Z_ADD 3 // Z addition of hotend (lift)
#define PAUSE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
#define PAUSE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
// It is a short retract used immediately after print interrupt before move to filament exchange position
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
#define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // Unload filament length from hotend in mm
// Longer length for bowden printers to unload filament from whole bowden tube,
// shorter length for printers without bowden to unload filament from extruder only,
// 0 to disable unloading for manual unloading
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
// Short or zero length for printers without bowden where loading is not used
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 0 // Extrude filament length in mm after filament is loaded over the hotend,
// 0 to disable for manual extrusion
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
// or until outcoming filament color is not clear for filament color change
#define PAUSE_PARK_NOZZLE_TIMEOUT 900 // Turn off nozzle if user doesn't change filament within this time limit in seconds
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
#endif
Change #3
Make the software use the right pin on motherboard.
Scroll down the tab and look for the below code.
Here is where you will change the value to match the pin your using.
In both of my OSOYOO MKS Base v1.5 and Hictop red MPX .3 i had open pins near the end stops with a label D11. Theres 3 pins, SIGNAL - NEG - POS.
I used D11 because i wasnt able to find any online information regarding the proper pin 4 Marlin calls for.
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
#define FIL_RUNOUT_PIN 11 // Stock setting was 4. Changed to 11 for pin D11 on the motherboard.
This works even when using Octoprint.
Similar models
thingiverse
free
Filament Sensor Tevo Tornado with rotate locked by rimfire
...ament_change_load_length 0
#define advanced_pause_extrude_length 0
pins_rapms.h
//#define z_max_pin 19
#define fil_runout_pin 19
thingiverse
free
Filament Sensor Tevo Tornado by dvilleneuve
...oad_length 0
#define advanced_pause_extrude_length 0
pins_rapms.h
//#define z_max_pin 19
#define fil_runout_pin 19
thingiverse
free
Sigma3d Extruder With Filament Runout Sensor by serkanc
...pin
19 for z max pin
in configuration.h enable the filament_runout_sensor, uncomment the first line,
fil_runout_inverting = false
thingiverse
free
DIY Filament Runout Sensor by ahmeted
...llup
this configuration worked fine on my ender 3 pro printer with skr mini e3 v2 motherboard. it will probably work for you too.
thingiverse
free
Tevo Tarantula filament sensor by kristakos
... internal pullup:
//#define fil_runout_pullup // use internal pullup for filament runout pins.
and set inverting to true
thingiverse
free
Filament runout sensor case and cleaner by raf_ds
.../#define z_max_pin 19
go down this .h file where the actual runout is defined and change the pin to 19
-#define fil_runout_pin 19
thingiverse
free
Tevo Tarantula Filament Runout Sensor Enclosure by stylesuxx
...ad file is attached and may be customized via customizer in case you want to adapt it for a different switch, or your tolerances.
thingiverse
free
TriangleLab filament runout sensor mount for Ender 3 by OC_Rookie
...i'm sure other printers are compatible if they are similar to the ender 3. this is made for the...
thingiverse
free
Filament runout sensor by jos
.../webshop/cartesio-shop/electronics/filament-runout-sensor
for assembly :http://mauk.cc/mediawiki/index.php/filament_runout_sensor
thingiverse
free
FT-2020 i3 Prusa Filament Runout Sensor by jmbneaf
...stop sensor switches & cables from:https://smile.amazon.com/gp/product/b01fx8sr8a or..https://www.biqu.equipment/collections/switch-sensor/products/5pcs-lowest-price-black-mechanical-endstop-without-the-wheel-for-reprap-ramps-1-4-3d-printer-with-independent-packing or other similar places.... (most printer kits have 1 or 2 extra,...
Info
turbosquid
$7
info desk
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$3
Electronic Info Panel
...lygonal model, easy to animate. - poly count: 134 - formats: max /obj /fbx/3ds/dxf - high detail was preserved with 2048&#...
turbosquid
$7
Info desk 4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Vase white read info 3D Model
...vase white read info 3d model
3dexport
vase white
vase white read info 3d model wclf 90474 3dexport
turbosquid
free
Utility Unit-Info Counter -1
...t-info counter -1 for download as 3ds, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1207628)
cg_studio
$65
shanghai - pudong int info port3d model
...model
cgstudio
.3ds - shanghai - pudong int info port 3d model, royalty free license available, instant download after purchase.
evermotion
$5
154 eileen 44 sample info am80
...een & frank luxury-class modular shelf system designed for aandres by andy andresen.
www.aandres. evermotion 3d models shop.
turbosquid
$29
Info Street Female AAM 2130 001
... female aam 2130 001 for download as obj, fbx, blend, and stl on turbosquid: 3d models for games, architecture, videos. (1480763)
turbosquid
$25
LCD Screen Stand. Trade Show Booth. Tv info kiosk
.... trade show booth. tv info kiosk for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1646527)
3d_export
free
nose aspirator
...nose aspirator 3dexport more info and files...
Sensor
3d_export
free
parking sensor
...parking sensor
3dexport
car parking sensor
turbosquid
$1
Sensor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Smoke sensor
...port
smoke sensor, can be an impressive element for your projects. easy to use, realistic image, low polygon, quality materials.
3d_export
$5
Air Quality Sensor v1
...air quality sensor v1
3dexport
air quality sensor v1
3d_export
$15
float sensor
...e up render. - all parts and materials are logically named. other formats ================= - collada (.dae) - autodesk fbx - obj
turbosquid
$26
Wind sensor C
...free 3d model wind sensor c for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1328943)
turbosquid
$26
Wind sensor B
...free 3d model wind sensor b for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1328168)
3d_export
$5
ultrasound sensor
...ivers convert ultrasound into electrical signals, and transceivers can both transmit and receive ultrasound. export in: -obj -fbx
3ddd
free
Вытяжка Shindo pallada sensor
... вытяжка
вытяжка shindo pallada sensor. в двух размерах - 600 и 900. текстуры в комплекте.
turbosquid
$52
Wind sensor A B C
...
royalty free 3d model wind sensor a b c for download as fbx on turbosquid: 3d models for games, architecture, videos. (1408406)
Filament
3ddd
$1
Filament Cage
...filament cage
3ddd
лофт , filament cage
модель бра, делалась по фото!
turbosquid
$3
FILAMENT COUNTER
...d
royalty free 3d model filament counter for download as stl on turbosquid: 3d models for games, architecture, videos. (1563049)
3d_export
$5
Filament lamp 3D Model
...filament lamp 3d model
3dexport
filament lamp 3d model kevin 54161 3dexport
3d_export
$5
Filament bulb candle 3D Model
...filament bulb candle 3d model
3dexport
filament bulb-candle
filament bulb candle 3d model kevin 54163 3dexport
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3ddd
$1
Factory filament metal shade
...factory filament metal shade
3ddd
restoration hardware
restoration hardware. 20th c. factory filament metal shade.
Setup
3d_ocean
$5
Light Setup
...
3docean
light setup lightbox lights render setup
that’s light setup. easy for use. just delete spheres and position your object!
turbosquid
free
Desk setup
...oyalty free 3d model desk setup for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1300745)
turbosquid
free
the library.max(setup)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$5
HDRI Studio Lighting Setup
...ate the hdri into many lighting combinations. increase/decrease intensity. this is the complete lighting setup for vray using ...
3d_ocean
$9
Fireworks - Render Setup
...can be used for any kinds of short movies, or other works. includes a well documentation which includes the steps to change th...
3d_ocean
$5
MentalRay Studio Lighting Setup
...ene which you can change. the colors of the lights are ofcourse tweak-able. this is a basic light setup for you to use for pro...
3d_ocean
$5
Vray scene setup
...studio scene 2. vray setup 3. 2 vray cameras, one of them with dof 4. vray lights 5. vitra panton chair model 6. photoshop fil...
3d_ocean
$15
Render Setups Chair Wall
...render setups chair wall
3docean
chair max render setups vray wall white
render setups chair wall
turbosquid
$25
Interior light setup
...oyalty free 3d model interior light setup for download as c4d on turbosquid: 3d models for games, architecture, videos. (1539984)
turbosquid
$1
basic pc setup
...d
royalty free 3d model basic pc setup for download as blend on turbosquid: 3d models for games, architecture, videos. (1650020)
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Settings
archibase_planet
free
Setting
...setting
archibase planet
setting cover place setting
setting - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Setting
...setting
archibase planet
setting place setting cover
setting - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Setting
...setting
archibase planet
setting place setting cover
setting - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$8
decorative set mens set
...decorative set mens set
3dexport
decorative set men's set
archibase_planet
free
Set
...anet
set kitchen ware kitchen set kitchen tools
set kitchen tools n281114 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Set
...set
archibase planet
beer set bar equipment
beer set - 3d model for interior 3d visualization.
archibase_planet
free
Set
...set
archibase planet
cover place setting
set - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Set
...set
archibase planet
kitchen set kitchen ware
set - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Set
...set
archibase planet
set cup glass kitchen ware
set - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Set
...set
archibase planet
flatware cover place setting
set n311210 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Amp
design_connected
$16
Amp
...amp
designconnected
normann copenhagen amp computer generated 3d model. designed by legald, simon.
3ddd
$1
amp
...amp
3ddd
:-o
3ddd
free
A&X
...a&x
3ddd
a&x
современная кровать фабрики a&x;
3ddd
$1
Molteni & C Night & Day
...molteni & c night & day
3ddd
molteni&c
molteni & c night & day nel248a
3ddd
$1
Molteni & C - Night & Day
...mp;amp; day
3ddd
molteni&c , кушетка
molteni & c - night & day ncl 126/a
3ddd
$1
Villeroy & Boch / Loop & Friends & L'Aura
...op & friends & l'aura
3ddd
villeroy&boch
loop & friends раковина для установки на столешницу
3ddd
free
barovier&toso
...ddd
классическая люстра barovier&toso , barovier&toso
barovier&toso;
3ddd
$1
Стул A&D
...стул a&d
3ddd
a&d
chair a&d;
3ddd
$1
Night&Day
...p;c , night&day
http://www.formul.ru/products/mebel_dlja_spalni/196588
3ddd
$1
B&B
...b&b
3ddd
b&b italia
statue b&b italy