Filament Roll (Optimus Remix) by sigmantium

Last crawled date: 3 years, 1 month ago

I was having issues printing the filament roll spool supplied by Febtops github.
I took their design and split it into 2 parts.
The way I've reproduced the part was as follows.
Print the outer spool, don't use supports.
Print the inner spool, Once the print reaches approx. 75mm in Z height, or 80% completion press the settings button then pause the print.
In the print head movement window select 10 as the unit of measurement and raise the head 10 times.
Slide the outer spool over the top of the inner spool then lower the print head 10 times again(i don't actually know if this is required or if the machine knows where to go back to).
Then go back into the other menu and press play to continue the print.
This will reproduce the desired effect of having the outer spool free floating around the inner roller.