Thingiverse
Filament Guide & Filament Tensioning Clip for Wanhao Duplicator D6 / Monoprice Maker Ultimate by Branewirt
by Thingiverse
Last crawled date: 3 years ago
On certain long moves of the printhead, my filament would sometimes unreel from the spool and tangle around the spoolholder.
So I designed two parts, which also can easily be used standalone:
A filament guide which is held in place by the acrylic hood. It will hold the filament at a certain position on the back of your printer, without adding any resistance, so it doesn't compromise print quality.
A small filament tensioning clip, which is simply clipped around the filament and will keep it tense, so it won't unreel from the spool.
You will need the spring of a clothes-peg to combine the two halves of the clip, as well as some kind of a weight to stick onto the clip. I used a large metal washer, but anything that you can glue to the clip is just as fine. You can experiment with different weights, but I found 20-30 grams to be adequate.
There are two versions of the tensioning clip: one with a lug to press a washer onto, and a flat one.
So I designed two parts, which also can easily be used standalone:
A filament guide which is held in place by the acrylic hood. It will hold the filament at a certain position on the back of your printer, without adding any resistance, so it doesn't compromise print quality.
A small filament tensioning clip, which is simply clipped around the filament and will keep it tense, so it won't unreel from the spool.
You will need the spring of a clothes-peg to combine the two halves of the clip, as well as some kind of a weight to stick onto the clip. I used a large metal washer, but anything that you can glue to the clip is just as fine. You can experiment with different weights, but I found 20-30 grams to be adequate.
There are two versions of the tensioning clip: one with a lug to press a washer onto, and a flat one.
Similar models
thingiverse
free
Prusa i3 MK2 Filament Holder and optional Filament Guide by Jasoncanning
...ilament that is not on a reel. the keep stops it falling off the spool holder and works until the end of the filament is reached.
thingiverse
free
WANHAO Duplicator i3 top filament guide by aggtaa
...on its own.
the mirrored version of the guide is also available if you prefer to feed your filament in front of the portal frame.
thingiverse
free
PrintrBot 2pc Basic Spool Holder by Cmerritt_319
...l so that the filament is "retained" in the area between the spool of filament and the filament retainer bar.
yer done!
thingiverse
free
FIlament Guide / Oiler by MR2C280
...71. it is especially useful for guiding loose filament hung on my loose filament holder https://www.thingiverse.com/thing:2532195
thingiverse
free
Universal 1,75 mm Filament Guide by luckyx182
...rial up to 16mm thick.
printed this with 0.4 mm nozzle and 70% infill.
please don't change the orientation in slicer.
cheers.
thingiverse
free
Filament Clip (Spring Loaded) by humebeam
...filament if you like.
the clip will fit 1.75 mm filament. if someone is interested in a 2.85 mm version i could make one as well.
thingiverse
free
Deltaprintr PVC spool holder by nebarnix
...m3 bolt can be drive into the bottom through a plate or large washer to secure it. v1 simply drops in and can be somewhat wobbly.
thingiverse
free
Filament guide for FLUX Delta printer v2 by mistertech
...signed v2 clip so it won't interfere with the travel of the arms as long as you place the clip on the right side of any arms.
thingiverse
free
Filament Guide for DaVinci by corkymork
...e, which clips to the rear slot and keeps the filament feeding properly. it doesn't require any modifications to the printer.
thingiverse
free
Filament Clip (1.75mm)
.... if people want a 3mm one i can create one but since i have no 3mm filament to test it with i can't ensure it'll work...
Branewirt
thingiverse
free
Door Wedge / Door Stop / Türkeil by Branewirt
...oval.
türkeil mit rutschhemmender unterseite, reduziertem volumen zum filamentsparen und einem griffloch zum einfachen entfernen.
thingiverse
free
Wanhao D6 Extruder PCB holder by Branewirt
...top side and added elevation for pcb mounting holes.
update 17.5.17, rev 2: increased elevation of the pcb mounting holes to 2mm.
D6
thingiverse
free
D6 by red_dr4gon1
...d6 by red_dr4gon1
thingiverse
d6 dice
thingiverse
free
D6 by Toasterz
...d6 by toasterz
thingiverse
d6 first iteration
thingiverse
free
d6 by rdhawk
...d6 by rdhawk
thingiverse
it's a d6. there are many like it, but this one is mine.
thingiverse
free
D6 Die
...d6 die
thingiverse
one single d6 die. i have not printed it yet, but it should work.
thingiverse
free
D6 by SponGino
...d6 by spongino
thingiverse
d6 made with blender. haven't printed yet. should be balanced
thingiverse
free
art d6 by bratskbars
...art d6 by bratskbars
thingiverse
art d6
thingiverse
free
Nemesis Attack D6
...nemesis attack d6
thingiverse
d6 attach die for nemesis the boardgame
thingiverse
free
d6 by TheBigTricky
...d6 by thebigtricky
thingiverse
di
thingiverse
free
D6 for game
...d6 for game
thingiverse
dice for a friends game.
thingiverse
free
Sculpted D6 by MaskedRetriever
...ved numbers on a mass-producable, shareable d6 is even better!
on monday the tutorial for making this in blender 2.51 will be up!
Ultimate
thingiverse
free
The Ultimate Print by ReptileEdge
...the ultimate print by reptileedge
thingiverse
the ultimate print
thingiverse
free
gabion ultimate by jonarkosse
...gabion ultimate by jonarkosse
thingiverse
chasseur gabion ultimate
thingiverse
free
Ultimate test by Robbie1949
...ultimate test by robbie1949
thingiverse
ultimate test makerbot 2
thingiverse
free
Ultimate! by TheBrunoSan
...ultimate! by thebrunosan
thingiverse
ok
thingiverse
free
Ultimate Yurnero.stl Ultimate Yurnero.stl Yurnero Driver.stl
...ultimate yurnero.stl ultimate yurnero.stl yurnero driver.stl
thingiverse
3d printed bey all zera full metal
thingiverse
free
The Ultimate Knife Block
... be found:https://t3chflicks.com/shop/kit/the-ultimate-knife-block/
or https://www.instructables.com/id/the-ultimate-knife-block/
thingiverse
free
Ultimate Frisbee by TheMadMaker
...ultimate frisbee by themadmaker
thingiverse
an ultimate frisbee token for my team-coventry complexity.
thingiverse
free
Ultimate Pawn V2 by nxtmonkeys
...ultimate pawn v2 by nxtmonkeys
thingiverse
another ultimate pawn.
thingiverse
free
Mjolnir (Ultimate ver.) by EmmetMcDonald
...mjolnir (ultimate ver.) by emmetmcdonald
thingiverse
a model of the mjolnir of the ultimate universe.
thingiverse
free
Ultimate Stringing Test
...ultimate stringing test
thingiverse
10 mins print to test your 3d printer
consist of 3 shapes for ultimate test.
Monoprice
thingiverse
free
Display frame for Monoprice MP10
...display frame for monoprice mp10
thingiverse
display frame for monoprice mp10
thingiverse
free
Bridge covers Monoprice MP10
...bridge covers monoprice mp10
thingiverse
bridge covers monoprice mp10
thingiverse
free
Monoprice Coin by Peyton_Guyot
...monoprice coin by peyton_guyot
thingiverse
print this!
thingiverse
free
Voxel Monoprice spool holder by avalero
...voxel monoprice spool holder by avalero
thingiverse
voxel monoprice spool holder
thingiverse
free
Monoprice select mini knob by BramRausch
...monoprice select mini knob by bramrausch
thingiverse
this is a replacement knob for the monoprice select mini.
thingiverse
free
Monoprice 3d printer hook by dmitriyf
...monoprice 3d printer hook by dmitriyf
thingiverse
this is an attachment to monoprice select 3d printer v2
thingiverse
free
monoprice ultimate spool mount by death4u
...older by danmannert to monoprice ultimate 3d printer. it clips into the slot on the top of the printer for the optional enclosue.
thingiverse
free
Monoprice Mini Delta Foot
...a foot for a monoprice mini delta. it helps to increase airflow under the printer. it also helps to reduce the volume of the fan.
thingiverse
free
Monoprice Select Mini Fan Guard
...y fan protection. this is an essential upgrade.
used it on the monoprice select mini pro (from www.3dprinthings.be).
perfect fit!
thingiverse
free
Monoprice Cable Tie Mount
... but had to cut down the straps a bit to make them work. designed a quick mount that fits the full strap, item 6457 on monoprice.
Duplicator
thingiverse
free
Slides duplicator by mriv
...slides duplicator by mriv
thingiverse
version 2. a simple thing to duplicate old 35 mm slides
thingiverse
free
Luftkanal Duplicator 7 by Schichtwerkstatt
...luftkanal duplicator 7 by schichtwerkstatt
thingiverse
luftkanal duplicator 7
thingiverse
free
Hoodlid (Duplicator 4s ) by Kaffetobbe
...hoodlid (duplicator 4s ) by kaffetobbe
thingiverse
for wanhao duplicator 4s hood
thingiverse
free
Wanhao Duplicator i3 by imagineering4
...wanhao duplicator i3 by imagineering4
thingiverse
these are the stl files for the improvements to the wanhao duplicator i3, v2
thingiverse
free
Wanhao Duplicator i3 Model by Hilde3D
...wanhao duplicator i3 model by hilde3d
thingiverse
wanhao duplicator i3 model
thingiverse
free
Touch Memory Duplicator Housing by zi3d
...touch memory duplicator housing by zi3d
thingiverse
touch memory duplicator housing
thingiverse
free
Wanhao Duplicator table level by OzzytheMozzy
...wanhao duplicator table level by ozzythemozzy
thingiverse
table leveling bracket for wanhao duplicator
thingiverse
free
Dlp dripper for duplicator 7 by lelugiotom3d
...dlp dripper for duplicator 7 by lelugiotom3d
thingiverse
wanhao duplicator 7 dlp resin dripper
thingiverse
free
Wanhao Duplicator i3 v2 / v2.1 MOSFET Halter / Duplicator i3 Heatbed Expander Holder by JMDesigns
...xpander holder by jmdesigns
thingiverse
wanhao duplicator i3 mosfet halter / duplicator i3 heatbed expander holder
( v2 / v2.1 )
thingiverse
free
Duplicator 4 Buildplate by drxenocide
...for the wanhao duplicator 4s, so i decided to make one. this is not intended to be printed, but is merely for modelling purposes.
Wanhao
thingiverse
free
Wanhao Logo Plate / Wanhao Logo Schild by JMDesigns
...wanhao logo plate / wanhao logo schild by jmdesigns
thingiverse
wanhao logo plate / wanhao logo schild
thingiverse
free
Wanhao logo by nebtio
...wanhao logo by nebtio
thingiverse
wanhao logo
thingiverse
free
Wanhao keychain by Rein3003
...wanhao keychain by rein3003
thingiverse
a keychain with the logo of wanhao
thingiverse
free
Wanhao Di3 v2 Light / Wanhao Di3 v2 Beleuchtung by JMDesigns
...wanhao di3 v2 light / wanhao di3 v2 beleuchtung by jmdesigns
thingiverse
wanhao di3 v2 light / wanhao di3 v2 beleuchtung
thingiverse
free
TUSH For Wanhao by wtmi1992
...tush for wanhao by wtmi1992
thingiverse
the ultimate spool holder, modified for the top of the wanhao control box. fits snug.
thingiverse
free
fanduct wanhao d12 by theopoilmek
...fanduct wanhao d12 by theopoilmek
thingiverse
fanduct pour wanhao d12
thingiverse
free
Wanhao i3 Marlin by johan21
...wanhao i3 marlin by johan21
thingiverse
marlin for wanhao i3 rampsboard 1.4.
thingiverse
free
Wanhao Duplicator i3 by imagineering4
...wanhao duplicator i3 by imagineering4
thingiverse
these are the stl files for the improvements to the wanhao duplicator i3, v2
thingiverse
free
Wanhao D6 filament guard
...wanhao d6 filament guard
thingiverse
this is a filament guard for wanhao d6 machine to avoid the filament unrolling
thingiverse
free
Wanhao Duplicator i3 Model by Hilde3D
...wanhao duplicator i3 model by hilde3d
thingiverse
wanhao duplicator i3 model
Tensioning
thingiverse
free
tensioner by Gincso0808
...tensioner by gincso0808
thingiverse
test tensioner
thingiverse
free
Tensioner
...tensioner
thingiverse
print in upright position. works great on any extrusion
thingiverse
free
tensioner by GMFerrari
...the y-axis belt with a chain 6mm because the belt was now deformed by tension.
in the photos you can see how i made the tensioner
thingiverse
free
rope tensioner by Muffin256
...rope tensioner by muffin256
thingiverse
rope tensioner
thingiverse
free
tension spring by mikehubka
...tension spring by mikehubka
thingiverse
tension spring
thingiverse
free
Belt tensioner. by IvanFjodorovich
...belt tensioner. by ivanfjodorovich
thingiverse
belt tensioner.
thingiverse
free
Clothesline Tensioner by hervstein
...clothesline tensioner by hervstein
thingiverse
tensioner for clothesline ropes.
thingiverse
free
Chain Tensioner by tromano32
...chain tensioner by tromano32
thingiverse
simple chain tensioner
thingiverse
free
Hercules Extruder Tensioning
...g.
3d printed tensioning screw ideally should be printed with 100% infill and
the tensioning plate can be printed with 30% infill
thingiverse
free
The delta tensioning by RuiJan1
...the delta tensioning by ruijan1
thingiverse
this is a delta prenter the arm tensioning
Maker
thingiverse
free
Maker Max Maker Coin by maxwilcocks
...maker max maker coin by maxwilcocks
thingiverse
this is my maker coin
thingiverse
free
Maker Coin
...maker coin
thingiverse
my maker coin
thingiverse
free
Maker Box Maker Coin by MakerBoxCollection
...er 2016 maker box. it used about 3.5m of 2.85mm filament with the settings listed.
designed by maker box co-owner nick moretto.
thingiverse
free
Maker Coin
...maker coin
thingiverse
maker coin-esque design i made in solidworks.
thingiverse
free
Maker Coin
...maker coin
thingiverse
my maker coin designed for my additive manufacturing course.
thingiverse
free
Maker coin
...maker coin
thingiverse
this is a maker coin that also doubles as a 1/4 in drive socket holder.
thingiverse
free
Maker Coin
...maker coin
thingiverse
this my maker coin which combines two of my passions: aircraft and 3d printing!
thingiverse
free
Maker Coin
...in
thingiverse
this is a maker coin with 45 degree angles on top and bottom of the print, a rounded interior, and a concave top.
thingiverse
free
Makers Muse Maker Coin by T-E-C
...makers muse maker coin by t-e-c
thingiverse
a maker coin as designed on the makers muse youtube channel.
thingiverse
free
Maker Coin
...maker coin
thingiverse
my maker coin with my intials. i also uploaded the blank coin for u guys to edit ur self
Guide
thingiverse
free
Filament guide (Guide-Fil) by phobosmoon
... by phobosmoon
thingiverse
another filament guide, with cap.
put some double-sided tape under the guide to fix it on your table.
thingiverse
free
Wide Guide and Single Guide by norrillous
...needed some single guides also. i found the ikea lack filament guide by karnschi so i added them in to .stl file as well... enjoy
thingiverse
free
diabolo guide
...diabolo guide
thingiverse
diabolo guide for r6 2011
thingiverse
free
Filament guide
...rse
this filament guide is to be used with the spare roller guide when you replaced the plastic extruder with the aluminum one.
thingiverse
free
Filament Guide Tube Guide by Mrrocketman
...e (e.g. bowden cable) on your prusa.
you can purchase the guide here: http://www.mcmaster.com/#8547k23
i recommend a 2ft length.
thingiverse
free
Wire guide for extruded aluminum and filament guide by Todd_Optional
...ilament guide by todd_optional
thingiverse
this is a wire guide and wire guide with filament guide for 20x40 extruded aluminum.
thingiverse
free
PTFE Guide
...piece of ptfe tube in (od of ~4.1mm) to guide filament to the direct drive.
without it the filament spool was unraveling spaghet.
thingiverse
free
FILAMENT GUIDE
...ww.thingiverse.com/thing:3184808
to be used with: ender 3 filament guide by mattellisonhttps://www.thingiverse.com/thing:3059604
thingiverse
free
Guide porte, door guide by vieen3d
...guide porte, door guide by vieen3d
thingiverse
pièce pour guider une porte coulissante
thingiverse
free
Lower Guide for Truvativ X-Guide Chain Guide by jordandandersen
...ntial part.
tested using makerbot thing-o-matic using abs plastic.
fork it on github: https://github.com/servetus/lowerguide
Clip
thingiverse
free
Clip
...clip
thingiverse
clip.
thingiverse
free
Meta Clips: Parametric Round Clips... with a clip! by hugomatic
...meta clips: parametric round clips... with a clip! by hugomatic
thingiverse
sometimes your clips need clipping too.
thingiverse
free
clip
...clip
thingiverse
clip for screen door screen install
thingiverse
free
SanDisk Clip Zip Clip by inflam52
...sandisk clip zip clip by inflam52
thingiverse
sandisk clip zip clip
thingiverse
free
Desk clip cable clip by Kexei
...desk clip cable clip by kexei
thingiverse
clip this on a side of your desk to clip cables
thingiverse
free
Sansa Clip Clip by BrayChristopher
...r up the volume controls, but the screen and the front buttons are still accessible.
i also uploaded some of my earlier concepts.
thingiverse
free
Sansa Clip clip by Pr0nboy
...nk it is functional. this was designed for the original sansa clip, i don't know whether this will work with the clip+ series
thingiverse
free
Clip
...clip
thingiverse
this clip helps mark where a child's height is on a tape measure.
thingiverse
free
CLIP
...clip
thingiverse
.
thingiverse
free
Clip for SanDisk Sansa Clip+ by oet
...clip for sandisk sansa clip+ by oet
thingiverse
i broke the clip on my sansa clip+ mp3 player so i created a new one.
Filament
thingiverse
free
Filament holder for 1,75mm filament by Boschlike
...ent holder for 1,75mm filament by boschlike
thingiverse
filament holder for 1,75mm filament.
mountable on the prusa mk3s+ frame.
thingiverse
free
Filament Holder SUNLU Filament by TrisiT
...filament holder sunlu filament by trisit
thingiverse
remix for the sunlu filament rolls.
thingiverse
free
Filament stand
...filament stand
thingiverse
basic filament stand for filament coils with bigger diameter.
thingiverse
free
Filament Holder
...filament holder
thingiverse
this filament stand is to hold the filament without using the as-built location
thingiverse
free
Filament clip
... clip
really easy to print and use. no hole to insert the filament. the filament stay in place because pressed against the spool.
thingiverse
free
Filament hanger
...filament hanger
thingiverse
hanger for filaments. it helps you organize your filaments and work space.
thingiverse
free
filament holder
...filament holder
thingiverse
filament holder
thingiverse
free
Filament Cradle
...filament cradle
thingiverse
filament cradle
thingiverse
free
Filament Holder (Filament Spool) by herenkeskin
...filament holder (filament spool) by herenkeskin
thingiverse
this is a filament holder. i printed this part on my tevo tarantula.
thingiverse
free
Pyramid Filament Mount with Filament Sensor by wlbillmartin
...pyramid filament mount with filament sensor by wlbillmartin
thingiverse
pyramid filament mount with filament sensor
(9:30)