Thingiverse
Filament Filter (LACK) by cody3D
by Thingiverse
Last crawled date: 3 years, 4 months ago
This is a filament filter/lubricator i made for my ikea lack enclosure.
What you need:
Three printed pieces
~58mm of 1.75mm PTFE tubing
Any pen spring
Cotten ball or whatever you will use as filter
Miscellaneous Hardware
Instructions:
Print three pieces
Cut ~58mm piece of 1.75mm ptfe tubing
Drill ~6-7mm diameter hole through lack
Insert the ptfe tubing into the printed bottom filament filter passthrough piece and insert into drilled hole through the bottom of the lack roof (the ptfe tubing should now extend through the top of the lack)
Insert screw to secure filament filter passthrough on bottom
Place the Printed filament filter base on top of the lack and fit over remaining ptfe tubing
Screw down filament filter base
Use any pen spring and a long M3 screw to screw filament filter cover over the filament filter base
Use a cotten ball or whatever you want as the filter inside the base
What you need:
Three printed pieces
~58mm of 1.75mm PTFE tubing
Any pen spring
Cotten ball or whatever you will use as filter
Miscellaneous Hardware
Instructions:
Print three pieces
Cut ~58mm piece of 1.75mm ptfe tubing
Drill ~6-7mm diameter hole through lack
Insert the ptfe tubing into the printed bottom filament filter passthrough piece and insert into drilled hole through the bottom of the lack roof (the ptfe tubing should now extend through the top of the lack)
Insert screw to secure filament filter passthrough on bottom
Place the Printed filament filter base on top of the lack and fit over remaining ptfe tubing
Screw down filament filter base
Use any pen spring and a long M3 screw to screw filament filter cover over the filament filter base
Use a cotten ball or whatever you want as the filter inside the base
Similar models
thingiverse
free
Enclosure filament guide PTFE by climber4fun
...at you can insert the 4mm od ptfe tube to avoid friktion.
enclosure: < 20mm
hole to drill: 13mm
pfte tube: 4mm od
fitting: m10
thingiverse
free
Filament filter for 4mm PTFE tube by Zoli4911
... 4mmptfe tube can be inserted at the end, and the bottom of the filter can be inserted into the push to release ptfe tube holder.
thingiverse
free
Drybox filament passthrough port by GameFan
...d into the wall of a drybox through a 12mm - 13mm hole and screwed into place from the other side.
suitable for 1.75mm filament.
thingiverse
free
IKEA LACK Table Filament Tube by Jgunde
...originally didn't have the ptfe tube but there was to much friction. definitely add the ptfe tube!
this fits 1.75mm filament.
thingiverse
free
Filament Pass through
...rough for 1.75mm filament
no support
insert a ptfe tube inside
max wall 25mm(1")
for thinner wall , print one or more washer
thingiverse
free
Drybox Filament Pass-Through
...
any comments and suggestions for improvements appreciated ;-)
feel free to remix, fusion 360 files are included in the download.
thingiverse
free
SAMLA/LACK FILAMENT FEEDER SYSTEM for PC4-M6 Fittings by L00TW1CK
...r the inside, the washer for the outside.
screw a pc4-m6 pushfitting into this thing, and add an ptfe tube from lack or whatever.
thingiverse
free
simple 1.75mm filament filter sponge holder to put on top of a PFTE tube by gunther3d
... holder.stl is the same but with a little cam on the bottom hole to enable guiding the pfte tube better in the hole on the bottom
thingiverse
free
ball pass filament by Planetech3D
...f the printer. passing the filament diameter is 4 mm for the use of the piece of tube ptfe
the hole is made with a stepped drill.
thingiverse
free
Lack Filament Pass–Through by bmonty
...on the bottom of the table to center the hole saw and cut the large hole. this filament guide is based on the idea from @hobb3s.
Cody3D
3d_export
$5
medallion depicting the deity baphomet that the knights templar were accused of worshipping file
...worshipping file 3dexport follow me<br>facebook: https://www.facebook.com/groups/1797954133626126/?ref=bookmarks<br>istagram: cody3d1 https://www.instagram.com/cody3d1/<br>twitter: https://twitter.com/cody3d<br>artstation: https://www.artstation.com/cody3dstore<br>youtube: https://www.youtube.com/channel/ucegptsyuzqwuu1fow04_mkw?view_as=subscriber<br>medallion, depicting the deity baphomet, that the knights templar...
thingiverse
free
Key Hook by cody3D
...key hook by cody3d
thingiverse
key and lanyard wall holder.
thingiverse
free
Pen_Carousel_Remix_Tray_x6_1.1 by cody3D
..._remix_tray_x6_1.1 by cody3d
thingiverse
makes for a bit more wiggle room for drilling out the tray wholes so they swing nicely.
thingiverse
free
Silverware Dryer by cody3D
...silverware dryer by cody3d
thingiverse
silverware dryer that drains into your sink. angled so that the water will drain out.
thingiverse
free
Samsung Wireless Rear Loudspeakers Wall Mount by cody3D
...samsung wireless rear loudspeakers wall mount by cody3d
thingiverse
samsung wirless rear speaker wall mount (swa-8500s)
thingiverse
free
Nintendo Game and Watch Stand by cody3D
...e printed in one piece or two. if printing in two pieces you will need two 13mm (or longer) m3 screws and two m3 hex nuts.
thanks
thingiverse
free
LACK Adjustable Filament Stand by cody3D
...was 10x too large)
also, here is a link to the filament filter visible in the picture:: https://www.thingiverse.com/thing:2567843
thingiverse
free
Sword
...https://www.youtube.com/channel/ucegptsyuzqwuu1fow04_mkw?view_as=subscriber facebook: https://www.facebook.com/groups/1797954133626126/?ref=bookmarks istagram: cody3d1 https://www.instagram.com/cody3d1/ twitter: https://twitter.com/cody3d artstation: https://www.artstation.com/cody3dstore ...
thingiverse
free
Lighter File STL
...https://www.youtube.com/channel/ucegptsyuzqwuu1fow04_mkw?view_as=subscriber facebook: https://www.facebook.com/groups/1797954133626126/?ref=bookmarks istagram: cody3d1 https://www.instagram.com/cody3d1/ twitter: https://twitter.com/cody3d artstation: https://www.artstation.com/cody3d ...
Lack
3d_export
$5
LACK LACK Coffee table white 90x55 cm IKEA
..., white, 90x55 cm ikea<br>https://www.ikea.com/ru/ru/p/lack-lakk-zhurnalnyy-stol-belyy-50449907/?ysclid=l8zshj49w6656165430
turbosquid
$4
Ikea Lack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
IKEA Lack Coffee Table
... кофейный
ikea lack coffee tablehttp://www.ikea.com/gb/en/catalog/products/00104291
turbosquid
$5
IKEA Lack Table
...ack table for download as blend, blend, unitypackage, and fbx on turbosquid: 3d models for games, architecture, videos. (1623135)
turbosquid
$10
Ikea Lack Set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
IKEA Lack Library
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
IKEA LACK TABLE
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
IKEA Lack Shelf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Ikea Table 5 Lack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
IKEA Lack Side Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Filter
3d_export
$10
cartridge filter
...cartridge filter
3dexport
cartridge filter
3d_export
$6
Bag filter
...bag filter
3dexport
bag filter
3d_export
$10
of dust filter
...of dust filter
3dexport
3d model of dust filter
3d_export
$10
of bag filter
...of bag filter
3dexport
3d model of bag filter
3d_export
$7
of bag filter
...of bag filter
3dexport
3d model of bag filter
turbosquid
$20
Filter
...ty free 3d model filter for download as ma, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1512887)
3d_export
$10
bag filter
...he ash hopper. when the gas containing fine dust passes through the filter material, the dust is retained and the gas is purified
3ddd
$1
UFI Filter
...ufi filter
3ddd
фильтр , ufi
ufi oil filter
turbosquid
$30
Filter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
filters
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Filament
3ddd
$1
Filament Cage
...filament cage
3ddd
лофт , filament cage
модель бра, делалась по фото!
turbosquid
$3
FILAMENT COUNTER
...d
royalty free 3d model filament counter for download as stl on turbosquid: 3d models for games, architecture, videos. (1563049)
3d_export
$5
Filament lamp 3D Model
...filament lamp 3d model
3dexport
filament lamp 3d model kevin 54161 3dexport
3d_export
$5
Filament bulb candle 3D Model
...filament bulb candle 3d model
3dexport
filament bulb-candle
filament bulb candle 3d model kevin 54163 3dexport
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3ddd
$1
Factory filament metal shade
...factory filament metal shade
3ddd
restoration hardware
restoration hardware. 20th c. factory filament metal shade.