Filament Filter (LACK) by cody3D

Last crawled date: 3 years, 1 month ago

This is a filament filter/lubricator i made for my ikea lack enclosure.
What you need:
Three printed pieces
~58mm of 1.75mm PTFE tubing
Any pen spring
Cotten ball or whatever you will use as filter
Miscellaneous Hardware
Instructions:
Print three pieces
Cut ~58mm piece of 1.75mm ptfe tubing
Drill ~6-7mm diameter hole through lack
Insert the ptfe tubing into the printed bottom filament filter passthrough piece and insert into drilled hole through the bottom of the lack roof (the ptfe tubing should now extend through the top of the lack)
Insert screw to secure filament filter passthrough on bottom
Place the Printed filament filter base on top of the lack and fit over remaining ptfe tubing
Screw down filament filter base
Use any pen spring and a long M3 screw to screw filament filter cover over the filament filter base
Use a cotten ball or whatever you want as the filter inside the base