Thingiverse
Filament Dry Box with Heater by billtoh
by Thingiverse
Last crawled date: 3 years, 3 months ago
As previously mentioned in my Filament Dryer box (www.thingiverse.com/thing:4608440), this is basically the same but with an additional heating unit.
Modifications to the original:
Height has being increased by about 40mm, to accommodate the heating unit.
Joins between the casing has been increased by 1mm for better assembly and sealing.
Improved EndCap. Tested with a few bowden tubes for better fitting.
The Top cover bowden tube connector has been mod to 11mm dia to better fit the quick-fit connector.
Heater unit is separately printed, this is to help ease of assembly but need to anchored down using UHU glue.
I have also included a STEP file (complete) for those who wants to modify the design.
The casing was printed with PLA, the heating unit with PETG.
The parts required:
12Vdc 4020 Fan, This fan is to circulate the heated air within the casing. It must always be on when the heater is used. I wired this fan directly to the 12VDC input.
75x75x1mm copper plate used as heating plate. You can use other sizes or aluminum but mounting holes are 65mm apart designed for 3mm screws.
Digital Thermostat,model KT3003 12V purchased from Aliexpress. I set this to 70C max and placed the thermocouple directly in contact with (under) the heating plate. And wired the switch relay contacts to the heater.
63x14mm 12V 10W Polyimide heating film. It comes with self adhesive and a maximum heating at 80C (with no load).
DC input socket, (7.5mm diameter hole in the casing).
mini LCD Digital Thermometer Hydrometer, round 41mm diameter.
4 nos bearing 22x8mm. I usually clean off the heavy grease and re-lubricate it with some light lub so that it is smoother and less friction.
3mm screws for mounting Fan and Heating plate
UHU glue to assemble and seal the casings.
Couple of rubber bands to help in the assembling.
64x28x2mm clear plastic (window size on casing is 60x25mm). If you do not want to print transparent PLA.
The temperature obtained using the above components is about 40C ambient in the casing with 55C at the heating plate. Higher temperature can be obtained if you used a higher capacity heater and a stronger circulating fan, but please be aware that Tg (glass transition) of PLA is about 55C and PETG is about 80C.
Again, please be informed that all risk and safety are on your own. I hold no responsiblity for it.
Modifications to the original:
Height has being increased by about 40mm, to accommodate the heating unit.
Joins between the casing has been increased by 1mm for better assembly and sealing.
Improved EndCap. Tested with a few bowden tubes for better fitting.
The Top cover bowden tube connector has been mod to 11mm dia to better fit the quick-fit connector.
Heater unit is separately printed, this is to help ease of assembly but need to anchored down using UHU glue.
I have also included a STEP file (complete) for those who wants to modify the design.
The casing was printed with PLA, the heating unit with PETG.
The parts required:
12Vdc 4020 Fan, This fan is to circulate the heated air within the casing. It must always be on when the heater is used. I wired this fan directly to the 12VDC input.
75x75x1mm copper plate used as heating plate. You can use other sizes or aluminum but mounting holes are 65mm apart designed for 3mm screws.
Digital Thermostat,model KT3003 12V purchased from Aliexpress. I set this to 70C max and placed the thermocouple directly in contact with (under) the heating plate. And wired the switch relay contacts to the heater.
63x14mm 12V 10W Polyimide heating film. It comes with self adhesive and a maximum heating at 80C (with no load).
DC input socket, (7.5mm diameter hole in the casing).
mini LCD Digital Thermometer Hydrometer, round 41mm diameter.
4 nos bearing 22x8mm. I usually clean off the heavy grease and re-lubricate it with some light lub so that it is smoother and less friction.
3mm screws for mounting Fan and Heating plate
UHU glue to assemble and seal the casings.
Couple of rubber bands to help in the assembling.
64x28x2mm clear plastic (window size on casing is 60x25mm). If you do not want to print transparent PLA.
The temperature obtained using the above components is about 40C ambient in the casing with 55C at the heating plate. Higher temperature can be obtained if you used a higher capacity heater and a stronger circulating fan, but please be aware that Tg (glass transition) of PLA is about 55C and PETG is about 80C.
Again, please be informed that all risk and safety are on your own. I hold no responsiblity for it.
Similar models
thingiverse
free
40mm Fan Mount for Bowden (E3D v6) by ajaybnl
...t fan side down, with supports on. 30% infill and 4 shell layers.
print with pla is fine, but it could do better with abs / petg.
thingiverse
free
bad Pla extruder/bowden crack fix idea by chaserof
...with a temperature control switchhttp://www.banggood.com/dc-12v-50-to-110-temperature-control-switch-heat-cool-temp-p-933303.html
grabcad
free
Hot Press 100Ton
...eater plate can be use oil heat by heater then circulate or use element on plate.
function is to press sawdust making solid block
thingiverse
free
Pre-Heater for Epax E-10 Resin Printer by rfriedeman
...e.
actually printed on a cr6-se, but that's not on the list.
support on build-plate only, but probably not super important.
thingiverse
free
Dimensional thermal test jig (for annealing) by punkgeek
...hat was easy to test in my oven (and i only needed my parts to survive in a super hot car - which the internet says is about 75c)
thingiverse
free
GDR immersion heater case / DDR Tauchsieder-Gehäuse by DocHu
...r (e.g. tangit pvc-u). you should use enough glue to seal it all around. nevertheless the case is not meant for underwater usage.
3dwarehouse
free
Home sauna
...home sauna
3dwarehouse
small home sauna with 6kw heater. heating time is about 15 mins (80c). #sauna
thingiverse
free
Anet A6 bowden extruder holding plate by Colindrovin
...a6. additional, you need a bowden extruder kit and 2 pcs m3 nuts.
i printed with pla. works great but you better use abs or petg.
cg_trader
$50
Smallest Incubator Heater | 3D
...ler. temperature controller i used,
https://www.amazon.in/robocraze-w1209-50-100-temperature-controller-thermostat/dp/b072kt75d3
thingiverse
free
BITx 40 front and back with 30mmfan and blank plate for Exellway EF01 case by User_not_defines4344
...th 30mm 12v fan right behind heatsink + the blank for updating and front.
remember to share
infill 50% pla i use carbonfiber pla
Billtoh
thingiverse
free
Ender3 Top Tool Tray with LED Bar by billtoh
...ng), and a switch.
"lm2596hvs dc-dc adjustable step down buck converter power module 4.5-50v to 3-35v current limiting"
thingiverse
free
Filament Dry Box by billtoh
... now testing my v2 which is about 50mm taller, to house a heater and fan for recirculating hot air. will post it when successful.
Heater
archibase_planet
free
Heater
... gas water heater
heater ariston gi7s 11l ffi ng gas water heater n160815 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
heater
...heater
3dexport
heater 3d modelling.
3d_export
$5
heater
...heater
3dexport
simple room heater
archibase_planet
free
Heater
...ater water heater hot-water generator
heater thermex if 80 v tank n290114 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$20
Heater
...
turbosquid
royalty free 3d model heater for download as c4d on turbosquid: 3d models for games, architecture, videos. (1145030)
turbosquid
$25
Heater
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$24
Heater
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
heaters
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
heater
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
heater
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Dry
3d_export
$5
hair-dry
...hair-dry
3dexport
hair-dry wahl 5439-024 super dry professional 2000 watts styling hair dryer- black
design_connected
$16
Dry-Dock
...dry-dock
designconnected
restoration hardware dry-dock computer generated 3d model.
archive3d
free
Dry 3D Model
...el
archive3d
drying unit radiator towel dry
towel dry - 3d model for interior 3d visualization.
turbosquid
$9
Dry Sprey
...urbosquid
royalty free 3d model dry sprey for download as ma on turbosquid: 3d models for games, architecture, videos. (1661017)
turbosquid
$1
Dry Persimmon
...quid
royalty free 3d model dry persimmon for download as max on turbosquid: 3d models for games, architecture, videos. (1449030)
turbosquid
$1
Dry Persimmon
...quid
royalty free 3d model dry persimmon for download as max on turbosquid: 3d models for games, architecture, videos. (1448712)
turbosquid
free
drying rack
...osquid
royalty free 3d model drying rack for download as max on turbosquid: 3d models for games, architecture, videos. (1614082)
turbosquid
$7
Dry plant
...
royalty free 3d model dry plant for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1273449)
turbosquid
$37
pineapple dry
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Dry Reed_001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Filament
3ddd
$1
Filament Cage
...filament cage
3ddd
лофт , filament cage
модель бра, делалась по фото!
turbosquid
$3
FILAMENT COUNTER
...d
royalty free 3d model filament counter for download as stl on turbosquid: 3d models for games, architecture, videos. (1563049)
3d_export
$5
Filament lamp 3D Model
...filament lamp 3d model
3dexport
filament lamp 3d model kevin 54161 3dexport
3d_export
$5
Filament bulb candle 3D Model
...filament bulb candle 3d model
3dexport
filament bulb-candle
filament bulb candle 3d model kevin 54163 3dexport
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3ddd
$1
Factory filament metal shade
...factory filament metal shade
3ddd
restoration hardware
restoration hardware. 20th c. factory filament metal shade.
Box
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
carton cardboard box box
box 1 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$6
box
...box
3dexport
box
3d_export
$5
Box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
archibase_planet
free
Box
...box
archibase planet
box box for paper notebook pencil
box - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n170111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n050411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Boxes
...boxes
archibase planet
boxes box case bin
boxes n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.