FGC-68 UNW 14inch LB M by Untangle

Last crawled date: 3 years, 2 months ago

this is the shroud set based on the FGC-9 shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker.
to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker
if you see other models of FGC-9 shrouds these can me modded to fit on a FGC-68 the only difference is that the hole for the barrel is bigger. so this could be drilled, cut, or melted away with a soldier iron.
keep in mind that you will need a LONG key to install this shroud.
and since this is the one piece version. a big printer to print this shroud
How do I assemble the FGC-68?
for parts look at the parts list PDF that can be found in the FGC-68 starter kit
to actually see how to do it whats this link.https://youtu.be/M_1AAlgVm-4
some tips disassemble the FGC68https://www.youtube.com/watch?v=pDRv5jwRReA
a introduction to the FGC68https://www.youtube.com/watch?v=-R810PSNJvA
a playlist to relevant things for the FGC68.https://www.youtube.com/playlist?list=PLVTi8DENyyvxTFzWGHSCEAj-XqR4OtClv
The FGC-68 in actionhttps://youtu.be/ha6UEfNO95k