FFP2 Mask Holder COVID-19 Corona Virus PPE Self Protection by seppowlt

Last crawled date: 3 years ago

Sometimes, when running a small local business, you want to give your customers the opportunity to protect themselves and you by wearing a FFP2-mask which you provide them for free.
This is one of many situations where this model performs best.
I designed this holder for individually packed FFP2-masks by “Siegmund Care”. Should also work for many other brands of masks.
You can print the FFP2 Holder Base alone, it has the letters “FFP 2" cutted out.
If you want to fill these holes with colored letters, just like I did, you can optionally print the “FFP 2 Holder Numbers” and insert them into the holes on the base.
In my case those numbers fit perfectly- i pressed them in and used a hammer to fit them perfectly in. This might vary, in this case just scale them a bit up or down in your slicer- shouldn't matter, because those letters only take around 15min to print.
Here are my print details:
Base: Prusa i3 MK3s | Sunlu PLA | 0.3mm | Oriented letters-down | 190g | 6h30min
Numbers: Prusa MINI | Prusament PLA | 0.25mm | 4g | 16min
Of course you can also print this model in PETG, ABS or whatever.
I added PLA-print files for the MK3s for you. Feel free to use them or just slice yourself. If you are using the MINI, you have to slice for yourself as well.
If you have any further questions, please dont hesitate to ask.