FETtec Drift Car - 20% wider by _ErrorAsh

Last crawled date: 3 years, 4 months ago

This is a remix of the FETtec Drift Car. The original Body didn't fit my electronics so I made it 20% wider, and 100% more awesome with a Batman logo ;)
The cutouts left and right of the battery are roughly 8*20mm, which should fit most step-ups and receivers.
I used the following print settings:
Chassis:
TPU (Sainsmart Shore 95A)
100% infill
0.16mm layer height
Shell:
PLA (Bavafil Black PLA)
3 walls
40% infill
0.16mm layer height
Brim so the walls don't fall over (one layer before they join the rest of the body like it did for me grrrrr)
Wheels:
TPU (Sainsmart 95A again)
1 wall
5 bottom/top layers
0.12mm layer height
0% infill (wheels need to be soft for some grip)
Bumpers:
TPU (Sainsmart 95A...)
3 walls
8 bottom/top layers
0.16mm layer height
infill doesn't really matter, it should be solid anyways
No Supports needed for any of the parts.
More info on the drifter car herehttps://www.thingiverse.com/thing:4685352
and herehttps://fettec.net/media/pdf/fd/c8/32/FETtec-Drift-Car-Manual.pdf
The car is extremely fun, can't get enough drifting action :D
Additional material needed:
Fettec 15A AIO (https://fettec.net/shop/fettec-mini-aio-15a?c=9)
Receiver of your choice (for example FrSky XSR)
5V Step-Up (I used this one https://www.amazon.de/gp/product/B08NTGTZCS/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1)
Any 1S battery (18650 3000mAh are ideal, I am using these: https://www.akkuteile.de/lithium-ionen-akkus/18650/samsung/samsung-inr-18650-30q-3-6v-3-7v-3000mah-15a_100805_1325)
M2 screws of various lengths
Some cables and XT30 plugs