FAST! 150 W LIPO DISCHARGER by AdrianAE

Last crawled date: 3 years, 1 month ago

FAST 150 W LIPO DISCHARGER
This thing has been designed with NX and printed with a Stratasys SLS printer, using polyamide. But with a conventional FDM printer, you will obtain very good results. In my first tests using ABS in a P3STEEL, I obtained good results and all parts can be connected perfectly.

To build the lipo discharger, you only need to cut the cable of the bulbs mount and make it shorter. Unweld the cables, cut the cables to the desired length and weld it again into the board.

Furthermore, you must weld the red and black cable of the discharger module into the Cellmeter. To do this, open the box that is closed with four screws and weld the cables in the position that I show in the top image.

If you have some question, not hesitate to ask me. I will reply you has soon as posible.

___________________________

Components that you need:

AOK Cellmeter --> https://www.banggood.com/AOK-CellMeter-8-Multifunctional-8S-Digital-Power-Capacity-Display-Servo-Tester-p-1007822.html?rmmds=search&cur_warehouse=CN

150W discharger module -> https://www.banggood.com/AOK-CellMeter-8-150W-Multi-Function-Battery-Tester-Discharge-Module-p-1084706.html?rmmds=detail-top-buytogether-auto&cur_warehouse=CN

The 3 in 1 150W Discharger Voltage Tester Balancer For Lipo Battery designed by Mhodder has given me the idea to design this thing. The link to his thing:
https://www.thingiverse.com/thing:2523033/#made