Thingiverse
FacetedVase1 by bbinnard
by Thingiverse
Last crawled date: 3 years ago
My thanks to Grasshopper Master Hyungsoo Kim who developed the basic geometry for this part, I added geometry for the top surface, inside, and bottom so it could be 3D printed. It printed in 18.5 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec.
Similar models
cg_trader
$3
3D printable boxes for stroage or as desk organizer | 3D
...supports. not for commercial use. print dimensions: 104 mm * 104 mm * 100 mm cube geometry box oraganizer 3d print gadgets office
cults
free
Faceted Vase 1
... and bottom so it could be 3d printed. it printed in 18.5 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec.
thingiverse
free
Pattern4
...sed only the pattern geometry. printing took just under 13 hours using a print speed of 80 mm/sec and a layer height of 0.200 mm.
thingiverse
free
Slatvase4 by bbinnard
... 3/4 hours with a layer height of 0.200 mm and a print speed of 100 mm/sec. a short viceo is here: https://youtu.be/2gbzqxpnuy8.
cg_trader
$10
Tetrahedron star 64 grit sacred geometry | 3D
...
tetrahedron star 64 grit sacred geometry pendant 3.7 cm diameter 1.5 mm thickness with softened edges 3d model for 3d printing
thingiverse
free
DoubleTwistVase4 by bbinnard
...one for more info on this one. this vase printed in 15 1/2 hours using a layer height of 0.200 mm and a print speed of 80 mm/sec.
thingiverse
free
Seastarbox1
...d it as the basis for this container. it printed in 22 1/4 hours using a print speed of 80 mm/sec and a layer height of 0.200 mm.
thingiverse
free
Petals4 by bbinnard
...d alone and be complete. this part printed in just under 8 hours using a print speed of 90 mm/sec and a layer height of 0.200 mm.
thingiverse
free
Guitar Strap Button by dasaki
...al model by cfinke in sketchup with slight modifications for better print and smoother geometry. hole is for 3 mm diameter screw.
cg_trader
$17
EARRING GEOMETRY | 3D
...earring geometry | 3d
cg trader
dimensions
leangth - 31,80 mm
width - 13,40 mm
height - 3,20 mm
Facetedvase1
thingiverse
free
FacetedVase2 by bbinnard
...of course. it is actually a different version of facetedvase1 (http://www.thingiverse.com/thing:2220224) made by changing several parameters that control the...
cults
free
Faceted Vase 2
...course. it is actually a different version of facetedvase1 (https://cults3d.com/en/home/facetedvase1 made by changing several parameters that control the shape...
Bbinnard
thingiverse
free
BasketWeave1 by bbinnard
...e1 by bbinnard
thingiverse
extensive info about this part is here: http://birkbinnard.com/blog/from-architecture-to-3d-printing/
thingiverse
free
Wiggle2 by bbinnard
...wiggle2 by bbinnard
thingiverse
large vase approx. 220 mm tall. 12 hours print time with 0.200 mm layer height.
thingiverse
free
Collander by bbinnard
...
thingiverse
this could be a small colander or fruit basket. using a layer height of 0.200 mm it printed in 16 hours 45 minutes.
thingiverse
free
VoronoiBowl4 by bbinnard
...y bbinnard
thingiverse
a smaller, solid-walled version of previous open voronoi parts. print time 17:30 @ 0.200 mm layer height.
thingiverse
free
PipeVase3 by bbinnard
...first of 2 parts with the same shape. next one will have just the ribs. this print took 22 hours with a layer height of 0.200 mm.
thingiverse
free
VoronoiBowl1 by bbinnard
...hingiverse
this medium sized bow printed in about 23 1/2 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec.
thingiverse
free
Wigglevase8 by bbinnard
... this vase is fairly large; the print shown here is scaled down to 65% and took 14.5 hours to print with a 0.200 mm layer height.
thingiverse
free
Planter3 & Tray3 by bbinnard
...amp; tray3 by bbinnard
thingiverse
oval-shaped planter and tray for small plants that may be too large for planter1 or planter2.
thingiverse
free
Round box with top by bbinnard
...round box with top by bbinnard
thingiverse
this round box has a tight fitting lid.
thingiverse
free
WBVase2 by bbinnard
...e same basic geometry but has a different overall shape. it printed in a little less than 20 hours using a 0.200 mm layer height.