Thingiverse
FabscanPi Camera Mount For New Case by willie42
by Thingiverse
Last crawled date: 3 years ago
The new software version of the fabscan - the fabscan pi - uses a raspberry-pi 2 and a pi-cam.
Watterrott designed a little board that has a LED-ring build in.
If you allready have an 50mm LED ring - you can use this thing to fix the camera and the ring in the new case.
The LED-ring I use has a diameter of 50 mm and four holes in a distance of 33 mm each.
I add the FrreCad-File so you can change it accordingly to your needs.
Watterrott designed a little board that has a LED-ring build in.
If you allready have an 50mm LED ring - you can use this thing to fix the camera and the ring in the new case.
The LED-ring I use has a diameter of 50 mm and four holes in a distance of 33 mm each.
I add the FrreCad-File so you can change it accordingly to your needs.
Similar models
thingiverse
free
Fabscan - Pi camera mount for Cube-Case by willie42
...:
added a version with a mount for a led-ring. the ring i use has a diameter of 50 mm and four holes in a distance of 33 mm each.
thingiverse
free
Fabscan camera holder with light for Pi-Cam V2 by db3jhf
...: the holder works as well for the older v1 cam because the dimensions fit.
revision 1: mechanical protection for led-ring added.
thingiverse
free
Cameramount FabScanPi by datenratte
...nuts can be used to attach it to the fabscan case. nuts are inserted and held in the part. the pi camera is fixed without screws.
thingiverse
free
ArduCam Rasperry Pi Camera Mount with LED Ring and 2020 Interface by elkayem
...d schematic i used to connect the raspberry pi to the led. see comments section for instructions on how to configure octoprint.)
thingiverse
free
ender3 v2 raspberry pi camera with ir leds by oramafanis
... so much so i decided to use it for my camera that has ir led attached.
this is a great remix that meets my needs.
i hope for you
thingiverse
free
Fabscan Pi CamMount for CJMCU-2812-8 by feinripper
...amp; v2. it holds up to three cjmcu-2812-8 led strips as a alternative to the original 2812 led ring.
its based on mwt's idea
thingiverse
free
Scan Stands for Fabscan Pi by tlerche
...scan stands for fabscan pi by tlerche
thingiverse
different platforms to help you get better scans with fabscan pi
thingiverse
free
Anycubic i3 Mega Raspberry Pi 4B holder with Pi Camera mount, LED support and relay case by NilsRo
...t" source.
to mount the holder you have to use m3 x 12mm screws instead of the original ones on the left side of the mega s.
thingiverse
free
Raspberry Pi Camera (Raspicam) Case for Tripod by scottandpamela
...f you want to modify. i did have to run it through netfabb to clean up before printing, probably missed a few surfaces somewhere.
thingiverse
free
My-Pi and camera case by paulcox
... on your printer, you will need to adjust the spacing tolerance for more/less of a tight fit around the board and its components.
Fabscanpi
thingiverse
free
FabScanPi camera mount by mwt
...fabscanpi camera mount by mwt
thingiverse
this is a pi-cam and led rgb 24 ring mount for the fabscanpi.
with m4 screw holes.
thingiverse
free
Cameramount FabScanPi by datenratte
...nuts can be used to attach it to the fabscan case. nuts are inserted and held in the part. the pi camera is fixed without screws.
thingiverse
free
FabScanPi scanned bear by l_k3
...ware. the scanned object was a bear. scan quality was medium and the simple_mesh export filter was selected for creating the stl.
thingiverse
free
FabScanPi scanned rubber duck. by l_k3
...he scanned object was a rubber duck. scan quality was medium and the simple_mesh export filter was selected for creating the stl.
thingiverse
free
FabScanPi-Laser-mount by tlerche
...fabscanpi-laser-mount by tlerche
thingiverse
just making a laser stand that is a bit more steardy and more eazy to adjust
thingiverse
free
CCCamp 2015 Wurst - Scanned by a FabScanPi by l_k3
...he fabscanpi software was able to scan it. with this scan i have also kept my promise! have fun and do whatever you want with it.
thingiverse
free
FabScanPi Sandwich Box by db3jhf
... as for nema17 steppers.
the outer dimensions are about 32 x 32 x 32 cm. the usable space in the inside is about 26 x 26 x 26 cm.
thingiverse
free
FabScanPi - Holder for Calibration-Pattern Sheet by db3jhf
...bly use it on you own design of the turntable. to use it you'll need to remove one of the turntable's four fixing screws.
thingiverse
free
Cooler for FabScanPi by HWFrickler
... and is hold by double sided tape at the other (therefore the need of the "frame" part to get a flat area for the tape)
thingiverse
free
FabScanPi / RaspiCam adjustable Camera Mounting by db3jhf
...rews at the backside.
optional you can print "sled i led" so that you can also use the "rpi-ringlicht" board.
Willie42
thingiverse
free
Masonic Stencil by willie42
...ncil by willie42
thingiverse
just a little masonic stencil.
use it for flour or cocoa and decorate your bread or your cappucino.
thingiverse
free
EiPhone - Eggbot-Design by willie42
...eiphone - eggbot-design by willie42
thingiverse
a very simple design - made for an iphone-fan.
thingiverse
free
Masonic SphereBot Themes by willie42
...n is near ...
one of the motifs was specially made for the 200th anniversary of the lodge in coblenz:https://youtu.be/t1jclrjx5ha
thingiverse
free
Screw Clamp Protective Covering by willie42
...screw clamp protective covering by willie42
thingiverse
i made them as a spare part for my old screw clamps.
thingiverse
free
Compass And Square by willie42
...e as they should.
the square is easy to print.
i painted both with color out of a spray-can and use them for dekorative purposes.
thingiverse
free
Ring - Compass and Square with skull by willie42
...ender (freehand sculpting) and printed from castable resin. then embedded in investment, burned out and finally casted in silver.
thingiverse
free
Old Window handle by willie42
...open markets, but had no success. so i drew one and printed it. a bit of colour and voila ... not perfect in style, but is works.
thingiverse
free
Ender-4 Display Tilt Mount by willie42
...
a simple way to mount the original display panel tilted 30 degrees.
all you need are the printed parts and three simple screws.
thingiverse
free
Celtic Wedding Ring - Highlander Inspired by willie42
...
i made this ring after i saw a episode of highlander.
it has a hand-crafted look and i casted it in silver. i hope, you like it.
thingiverse
free
YAKF - Yet Annother Keyboard Foot - K260 by willie42
...llie42
thingiverse
this one is for a logitech k 260.
the other feet on thingiverse looked all a bit different, so i made my own.
Camera
thingiverse
free
Camera to camera adaptor by RayvenLover
...camera adaptor by rayvenlover
thingiverse
allows you to mount two cameras, one ontop of the other. uses standard bsp 1/4 thread.
thingiverse
free
camera + textures
...camera + textures
thingiverse
camera
thingiverse
free
Camera by carlynton
...camera by carlynton
thingiverse
camera
thingiverse
free
Camera Mount for Yi Home Camera
...era
thingiverse
a simple camera mount for the yi home camera. mounts in rails with t-nuts.
v2 is a solid body with cut letters.
thingiverse
free
Camera by Danielesko30
...camera by danielesko30
thingiverse
this is a basic camera
thingiverse
free
Camera by BasicallyChurch
...camera by basicallychurch
thingiverse
basically a little camera.
thingiverse
free
Case camera
...case camera
thingiverse
piece for heli camera
thingiverse
free
Camera by MNinventer
...camera by mninventer
thingiverse
fake camera for the kids.
thingiverse
free
Camera Platform for RasPi Camera by ElieWardini
...thingiverse.com/thing:1646474
update: i have a new version of the “watcher”, there is more space for the camera to swivel.
enjoy!
thingiverse
free
Camera back case for RaspberryPi Camera by blackstyles
...era by blackstyles
thingiverse
camera back case for raspberrypi camera "noir camera(5mp) for raspberry pi" + ir lights
New
thingiverse
free
New by 3DBOXPRINTING
...new by 3dboxprinting
thingiverse
new to start a new week, a new thing.
have a nice week!
thingiverse
free
New by EvgDem
...new by evgdem
thingiverse
new
thingiverse
free
New Whig
...new whig
thingiverse
new whig party
thingiverse
free
5/8x24 new new by KevinIhle
...5/8x24 new new by kevinihle
thingiverse
5/8x24 thread
thingiverse
free
new strife
...new strife
thingiverse
fixed posed models of the new strife model from darksiders genesis
thingiverse
free
New Tsurikawa by shopbymara
...new tsurikawa by shopbymara
thingiverse
new
thingiverse
free
New pyramid by aegreenart624785
...new pyramid by aegreenart624785
thingiverse
new
thingiverse
free
New Lay
...new lay
thingiverse
my most popular model is lay
here is a new version i hope it is
as liked as her predecessor
thingiverse
free
new roller by justinbarrera14
...new roller by justinbarrera14
thingiverse
roller new
thingiverse
free
death (new) by Syzguru11
...death (new) by syzguru11
thingiverse
death (new)
Case
thingiverse
free
Case
...case
thingiverse
case
thingiverse
free
Case
...case
thingiverse
case
thingiverse
free
case
...case
thingiverse
case for https://www.thingiverse.com/thing:4008790
case printed in surface mode
thingiverse
free
Case
...case
thingiverse
detector case first try
thingiverse
free
Case
...case
thingiverse
this is case for electrical components.
i used it for my led transformer.
thingiverse
free
Case
...case
thingiverse
this is a self created model of a case. it is desigend to be printed in a size of 15%.
thingiverse
free
case by milesman20051
...case by milesman20051
thingiverse
case
thingiverse
free
case by zyzomys
...case by zyzomys
thingiverse
case
thingiverse
free
CAse by Ryutaka18
...case by ryutaka18
thingiverse
case
thingiverse
free
case by johnboyjr
...case by johnboyjr
thingiverse
case
Mount
thingiverse
free
Pen Mount on BLTouch mount by jetspot
...pen mount on bltouch mount by jetspot
thingiverse
pen mount on bltouch mount
thingiverse
free
RAM Mount, Mount by seanmclean
...ram mount, mount by seanmclean
thingiverse
bridging plate to attach ram mount to yamaha 242, for chartplotter placement.
thingiverse
free
Mount for mount for Garmin GPS by GNOBLIN
...you can use this mount for prevent rotation simple mount around hendelbars.
d handelbar 31.8mm
use m3 screw and din 16903 plug.
thingiverse
free
Permanent mount for Modular Mounting System by WIR14
...permanent mount for modular mounting system by wir14
thingiverse
permanent mount for modular mounting system.
thingiverse
free
Gopro Mount and antenna mount by SuperYoyo
...gopro mount and antenna mount by superyoyo
thingiverse
cut the carbon platform to pass the gopro mount and enjoy !
thingiverse
free
Hexagon Mount for 50mm Mount (Sparkcube) by Draman
...for 50mm mount (sparkcube) by draman
thingiverse
hexagon mount remix from skimmys hotend-mount for sparkcube or other 50mm-mount
thingiverse
free
mount by gixster
...mount by gixster
thingiverse
custom mount
thingiverse
free
Mount by Matrxi999
...mount by matrxi999
thingiverse
shelf mount
thingiverse
free
Motor mount
...motor mount
thingiverse
motor mount
thingiverse
free
GoPro Mount
...gopro mount
thingiverse
gopro mount