Thingiverse
Extra Large Delta Printer with 450x450x450 print area by tlmxcpmpp
by Thingiverse
Last crawled date: 3 years, 1 month ago
Hello Thingiverse
Sorry it has been awhile since i last posted, but i have been busy getting ready for my next Comic-Con by building my Full Size Optimus Prime Costume.https://www.thingiverse.com/thing:2791968
I've decided to build the largest Delta Printer.
It stands 4'6" tall and 34" wide
And will have a print area of 450x450x450 give or take 50 mm height.
It is made out of 3/4" STEEL Square Tubing and all print jobs are 100% infil @ .1 or .2 layer, Depending on the location.
You will need 40' or square tubing at $26 at local scrap yard
You will need #8 self-drilling screws at 1'1/4, 3/4 and 1/2 inch. $6 a piece
You will need 2 8'x1/8x1 inch aluminum strips for counter swap support. @ $10 a piece
I am using 4 220x220 heat beds with their own 33amp power supply and 1 Power supply for the Board and Hotend. @ $14 on ebay https://www.ebay.com/itm/12V-220X220mm-Aluminum-Board-Hot-Plate-Heatbed-Heat-Bed-For-3D-Printer-Reprap-ES/332509925559?_trkparms=ao%3D1%26asc%3D51979%26meid%3Df390b373cefd4d23b696c7d255682d75%26pid%3D100705%26rk%3D1%26rkt%3D1%26%26itm%3D332509925559&_trksid=p2045573.c100705.m4780 I used Fireplace Mortar to glue the hot beds to a sheet of 20”x20” 3/16 aluminum sheet.
You will need 5 standard 12 vdc relays: https://www.ebay.com/itm/6Pack-12V-30A-Fuse-Relay-Switch-Harness-Set-SPST-4Pin-14-AWG-Hot-Wires/253167690800?epid=0&hash=item3af1f86430:g:OMIAAOSwXedZw09k Each Relay will have its own fan to keep it cool, Depending on which relay you get your wiring will be different.
The Magnetic Effector and Magnetic Carriages are from: https://www.thingiverse.com/thing:1584513/#files
I’ve modified the Carrier Carriage rail to wrap around the ¾ in tubbing and not sway. You can use the exciting wheels from your Kossel 800 Delta.
This is a build in progress so expect items to be added or removed.
I done this build to print the large items that my CoreXY printers couldn't print, plus i've read that magnet mounts make the walls and all around surface area smoother. Also i put my CoreXY printers to the test with my 405x305 delta, Same print jobs same specs, same infil and so on and the Delta printed the part in less time and smoother then the CoreXY. So I WIll be removeing all my CoreXY Printers and will be replacing them with Over Sized Deltas with Magnetic mount.
Project Update 5-8-2018: I've added some more Pictures.
Project Update 5-21-2018:I've added more pictures of the End Stops and Hotbed Mounts, along with some new Ramps 1.4 board/LCD.
this LCD/Ramps holder came from : https://www.thingiverse.com/thing:1639786
Project Update 5-23-2018: I've added some pictures and new STL's of Fan mounts for each of the ABC/XYZ Towers. If you plan in using 1/4 plywood as the base as i did then the Nema 17 Fan covers will not work. These new Alt Bottoms with fan support can mount 40mm fans and keep motor cool during those long print jobs.
Project Update 5-27-218: I've opted out of the Magnetic Effector and went with original Kossel 800 Arms and turnbuckles. I've removed the 20 tooth gears and replaced with 16 tooth Gears. I've added BLTouch but couldn't get it to work properly so went to a Tronxy Sensor for Auto Level.
BLTouch Adjustable mount came from : https://www.thingiverse.com/thing:2588288http://www.thingiverse.com/thing:2122894 used this and modified the Tronxy Sensor mount
BLTouch Alignment tool came from here : https://www.thingiverse.com/thing:1765933https://youtu.be/WAOSiHXIaR8
Current Print area is 450x450x563 that is 22 3/16 inches Height
Sorry it has been awhile since i last posted, but i have been busy getting ready for my next Comic-Con by building my Full Size Optimus Prime Costume.https://www.thingiverse.com/thing:2791968
I've decided to build the largest Delta Printer.
It stands 4'6" tall and 34" wide
And will have a print area of 450x450x450 give or take 50 mm height.
It is made out of 3/4" STEEL Square Tubing and all print jobs are 100% infil @ .1 or .2 layer, Depending on the location.
You will need 40' or square tubing at $26 at local scrap yard
You will need #8 self-drilling screws at 1'1/4, 3/4 and 1/2 inch. $6 a piece
You will need 2 8'x1/8x1 inch aluminum strips for counter swap support. @ $10 a piece
I am using 4 220x220 heat beds with their own 33amp power supply and 1 Power supply for the Board and Hotend. @ $14 on ebay https://www.ebay.com/itm/12V-220X220mm-Aluminum-Board-Hot-Plate-Heatbed-Heat-Bed-For-3D-Printer-Reprap-ES/332509925559?_trkparms=ao%3D1%26asc%3D51979%26meid%3Df390b373cefd4d23b696c7d255682d75%26pid%3D100705%26rk%3D1%26rkt%3D1%26%26itm%3D332509925559&_trksid=p2045573.c100705.m4780 I used Fireplace Mortar to glue the hot beds to a sheet of 20”x20” 3/16 aluminum sheet.
You will need 5 standard 12 vdc relays: https://www.ebay.com/itm/6Pack-12V-30A-Fuse-Relay-Switch-Harness-Set-SPST-4Pin-14-AWG-Hot-Wires/253167690800?epid=0&hash=item3af1f86430:g:OMIAAOSwXedZw09k Each Relay will have its own fan to keep it cool, Depending on which relay you get your wiring will be different.
The Magnetic Effector and Magnetic Carriages are from: https://www.thingiverse.com/thing:1584513/#files
I’ve modified the Carrier Carriage rail to wrap around the ¾ in tubbing and not sway. You can use the exciting wheels from your Kossel 800 Delta.
This is a build in progress so expect items to be added or removed.
I done this build to print the large items that my CoreXY printers couldn't print, plus i've read that magnet mounts make the walls and all around surface area smoother. Also i put my CoreXY printers to the test with my 405x305 delta, Same print jobs same specs, same infil and so on and the Delta printed the part in less time and smoother then the CoreXY. So I WIll be removeing all my CoreXY Printers and will be replacing them with Over Sized Deltas with Magnetic mount.
Project Update 5-8-2018: I've added some more Pictures.
Project Update 5-21-2018:I've added more pictures of the End Stops and Hotbed Mounts, along with some new Ramps 1.4 board/LCD.
this LCD/Ramps holder came from : https://www.thingiverse.com/thing:1639786
Project Update 5-23-2018: I've added some pictures and new STL's of Fan mounts for each of the ABC/XYZ Towers. If you plan in using 1/4 plywood as the base as i did then the Nema 17 Fan covers will not work. These new Alt Bottoms with fan support can mount 40mm fans and keep motor cool during those long print jobs.
Project Update 5-27-218: I've opted out of the Magnetic Effector and went with original Kossel 800 Arms and turnbuckles. I've removed the 20 tooth gears and replaced with 16 tooth Gears. I've added BLTouch but couldn't get it to work properly so went to a Tronxy Sensor for Auto Level.
BLTouch Adjustable mount came from : https://www.thingiverse.com/thing:2588288http://www.thingiverse.com/thing:2122894 used this and modified the Tronxy Sensor mount
BLTouch Alignment tool came from here : https://www.thingiverse.com/thing:1765933https://youtu.be/WAOSiHXIaR8
Current Print area is 450x450x563 that is 22 3/16 inches Height
Similar models
thingiverse
free
Midsized 350x350x270 CoreXY by tlmxcpmpp
... and not worry about them getting caught.
on the new fan mount i've added a place to mount either a bt touch or a bed sensor.
thingiverse
free
Folger i3 2020 Print Cooling Fan Assembly mount w/ BLTouch Mount by DynamiteHack
...ler that i just installed on my printer.
this thing is just the mount. you'll need to go to the original for the fan bellows.
thingiverse
free
Delta Effector for E3DV6 + 40mm Fan by robkar
...ne for 10x3mm magnets. use it with the matching arm carriages included in printer design: http://www.thingiverse.com/thing:923830
thingiverse
free
CR-10S E3D V6 Double Fan Mount V2.0 with BLTouch support by Nickys93
... body and it's shifted of 54mm on the x axis ( x offset 54) and i'ts in line with the nozzle for the y axis (y offset 0).
thingiverse
free
Kossel Effector modified for BlTouch mount by abailey
...tor modified for bltouch mount by abailey
thingiverse
i added a bltouch mount to the effector for use on my kossel delta printer
thingiverse
free
BLtouch mount for Hypercube by Pentel
...hypercube by pentel
thingiverse
this is my bltouch mount for the fan duct by arturslab https://www.thingiverse.com/thing:2013475
thingiverse
free
BLTouch 30mm Fan Mount
...ke if you liked it; collect it and remix it as needed. no idea if this will work with the stock mpmd, but it's worth the try.
thingiverse
free
E3D V6 Bowden BLTouch Clamp for Prusa by bshockme
...h 31, 2016: my knock-off e3dv6 has been replaced with a genuine one, and i am happy to report it works perfectly with it as well.
thingiverse
free
CR-10S Titan Aero BLTouch Mount by tophster
...mount to accommodate an 18mm abl sensor. here is the mount for that:
abl sensor mount - https://www.thingiverse.com/thing:2785242
thingiverse
free
220x525 Delta by tlmxcpmpp
... inch print bed if you want to take this version to the next level.
the final print area is 220x454.7 with and extra 40mm at top.
450X450X450
3ddd
$1
COSMORELAX Small pane
...оттоманка (пуф) с обивкой из натуральной кожи. размеры, мм: 450x450x450 24k...
3d_sky
$8
COSMORELAX Small pane
...ottoman classical ottoman (puff) with leather upholstery. dimensions, mm: 450x450x450 24 k...
thingiverse
free
Winnie The Pooh Money Jar by tlmxcpmpp
...and hollow. this project is being printed on my 450x450x450 delta printer. with a layer height of .4mm and...
cg_trader
$9
DV HOME Coco Pouf
...coco pouf cg trader dv home coco pouf size: 450x450x450 dv home coco pouf round furniture ottoman...
3dwarehouse
free
Banquinho 450x450x450
...iais estrutura: aço carbono com pintura eletrostática. tampo: mdf revestido com tecido 100% poliéster ou mdf laminado melamínico.
3dwarehouse
free
Mesa de Cabeceira Melamínico 450x450x450
...o melamínico corrediça invisível com amortecimento e extração total capacidade da gaveta: 30 kg carregador de celular por indução
3dwarehouse
free
Mesa de Cabeceira Laca 450x450x450
...cetinada. corrediça invisível com amortecimento e extração total. capacidade da gaveta: 30 kg. carregador de celular por indução.
3dwarehouse
free
Mesa de Cabeceira Tecido e Laca 450x450x450
...alumínio. corrediça invisível com amortecimento e extração total. capacidade da gaveta: 30 kg. carregador de celular por indução.
3dwarehouse
free
Mesa de Cabeceira Tecido e Melamínico 450x450x450
... em alumínio corrediça invisível com amortecimento e extração total capacidade da gaveta: 30 kg carregador de celular por indução
Tlmxcpmpp
thingiverse
free
Dalek Neck Rings by tlmxcpmpp
...dalek neck rings by tlmxcpmpp
thingiverse
this is the full size version of the full size dalek costume.
thingiverse
free
E-Cig tip by tlmxcpmpp
...rse
this is a narrow opening e-cig tip.
i didn't like the wide mouth tips so i wanted to see if i can make a new narrow tip.
thingiverse
free
L.E.D. Motorcycle Headlight Mount by tlmxcpmpp
... with 5mm thick wall and @ 92% infill with a .6 tip with a layer of .2 mm
i'll have more pictures as this project progresses.
thingiverse
free
Test Tube Shot Dispenser by tlmxcpmpp
...ifficult to pour mixed shots into test tube so i made it my mission to make one to help her out.
and this is what i came up with.
thingiverse
free
Bowling Ball Holder by tlmxcpmpp
...
both designs can be made out of abs or pla, pla however allows you to spin the ball to clean it.
the abs ball is harder to spin.
thingiverse
free
Full Size Dalek Head by tlmxcpmpp
...ll size head so you wouldn't have to use so much filament.
7-15-2017: i've added updated files for the new improved head.
thingiverse
free
Dalek Light Cage by tlmxcpmpp
...s auto store.
8/30/2017: as of today the lights are done and wired up. have a look here.https://www.thingiverse.com/thing:2469978
thingiverse
free
Sun Visor Clip by tlmxcpmpp
...nted to make it larger so it sits flush against the ceiling.
the first picture is the passenger clip, the next is the one i made.
thingiverse
free
Complete Full Size Dalek Eye with Rings by tlmxcpmpp
...8/30/2017: the eye is complete and mounted on my daleks head, you can have a look here. https://www.thingiverse.com/thing:2469978
thingiverse
free
Dalek Claw by tlmxcpmpp
... this one has the hole to add a spring, the springs from the heat beds work great, i had some extra laying around so i used them.
Delta
design_connected
$16
Delta
...delta
designconnected
arflex international spa delta computer generated 3d model. designed by koivisto, eero.
design_connected
$16
Delta
...delta
designconnected
lj lamps delta computer generated 3d model. designed by janowski-lenhart, sasha.
design_connected
$13
Delta
...delta
designconnected
emu group delta armchairs computer generated 3d model. designed by marin chiaramonte .
3ddd
$1
Delta Light
...delta light
3ddd
delta light , you-turn reo 3033
точечний светильник delta light
3ddd
$1
Blanco / delta
...blanco / delta
3ddd
blanco , мойка
мойка blanco delta со смесителем
3ddd
$1
Delta Light Spot
...delta light spot
3ddd
delta light
светильник фирмы delta light
3ddd
free
Bianchi Delta LVMDLT200100
...i delta lvmdlt200100
3ddd
bianchi delta , смеситель
смеситель bianchi delta lvmdlt200100
design_connected
free
Delta 190
...delta 190
designconnected
free 3d model of delta 190 by zanotta designed by progetti, emaf.
design_connected
$27
Delta 211
...delta 211
designconnected
zanotta delta 211 computer generated 3d model. designed by progetti, emaf.
design_connected
$27
Delta 234
...delta 234
designconnected
zanotta delta 234 computer generated 3d model. designed by progetti, emaf.
Extra
3d_export
$17
Extra 300
...extra 300
3dexport
extra 300
3ddd
$1
Fidel extra
...fidel extra
3ddd
новый стиль
новый стиль - fidel extra
3ddd
$1
RAPSODY extra
...rapsody extra
3ddd
новый стиль
новый стиль - rapsody extra
3ddd
$1
Столик Extra
...столик extra
3ddd
giannini
столик extra от giannini, италия.
3ddd
free
Extra Long
...ики fantoni, италия. имеет подсветку ( зеленая или белая). передняя панель выполнена из аккустических панелей.
текстуры в архиве.
3ddd
$1
Grammer / Extra
...ло , стул
офисное кресло extra фирмы grammer office. подробнее на www.grammer-office.com
turbosquid
$30
Extra Dimension
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Hennesy Paradis Extra
... алкоголь , коньяк
бутылка коньяка hennesy paradis extra
design_connected
$9
Extra Chair Leather
...xtra chair leather
designconnected
cappellini extra chair leather chairs computer generated 3d model. designed by fabien baron.
turbosquid
$30
Extra Beetle Lowpolys
...d model extra beetle lowpolys 3d for download as unitypackage on turbosquid: 3d models for games, architecture, videos. (1483177)
Area
3d_export
$15
exposicion area
...exposicion area
3dexport
exhibition area from urban space and squares / area de exibición para espacios urbanos y plazas
3ddd
$1
Porada Area
... area
area
design: w. mandelli - w. selva
chair completely covered by leather with metal frame.
3d_export
$5
Recreation area
...recreation area
3dexport
my very first design of a recreation area with panoramic windows.
design_connected
$7
Area pouf
...area pouf
designconnected
lammhults mobel area pouf benches computer generated 3d model. designed by anya sebton .
3d_ocean
$7
Child Park Area
...child park area
3docean
child child area child game child park area child park horse playgrounds
child park area ,playground
design_connected
$11
Area Table
...area table
designconnected
b&b italia area table computer generated 3d model. designed by piva, paolo.
3d_export
$12
Modern reception area
...modern reception area
3dexport
modern reception area
turbosquid
$55
Living area
...osquid
royalty free 3d model living area for download as max on turbosquid: 3d models for games, architecture, videos. (1500200)
turbosquid
$25
Cofee Area
...bosquid
royalty free 3d model cofee area for download as max on turbosquid: 3d models for games, architecture, videos. (1333805)
turbosquid
$20
reception area
...uid
royalty free 3d model reception area for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1476648)
Large
3d_export
$15
large excavator
...large excavator
3dexport
large excavator
design_connected
$22
Daydream large
...daydream large
designconnected
dedon daydream large computer generated 3d model. designed by frinier, richard.
design_connected
$7
Laccio Large
...laccio large
designconnected
knoll laccio large computer generated 3d model. designed by breuer, marcel.
3ddd
$1
MOLTENI LARGE
... подушка , плед
диван molteni&c; модель large
3ddd
$1
Molteni Large
... подушка , плед
диван molteni&c; модель large
3ddd
$1
CLAUDINE LARGE
...audine large
3ddd
claudine large , arflex
модель сделана в размерах и цветах аналога ...
design_connected
$11
Ovo Large
...ovo large
designconnected
cor ovo large armchairs computer generated 3d model. designed by studio vertijet.
design_connected
$4
Cu Large
...cu large
designconnected
kristalia cu large coffee tables computer generated 3d model. designed by monica graffeo.
3d_ocean
$18
Large sausage
...rge meat mental ray obj photorealistic sausage scanned vray
scanned 3d model of large sausage placed on rectangular wooden board.
design_connected
$16
Filly Large
...onnected
photo-realistic 3d models of the filly large chair from bonaldo for 3d architectural and interior design presentations.
Printer
archibase_planet
free
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$10
Printer
...id
royalty free 3d model printer for download as max and 3dm on turbosquid: 3d models for games, architecture, videos. (1607146)
turbosquid
$7
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$27
...print
designconnected
moroso print computer generated 3d model. designed by wanders, marcel.
3ddd
free
Eichholtz Prints
...- eichholtz print central station i
13 - eichholtz print central station ii
14 - eichholtz print marisa
15 - eichholtz print tish
3ddd
$1
Eichholtz Prints
...print abstract - set of 2
10 - eichholtz print orange abstract
11 - eichholtz print buddha right
12 - eichholtz print buddha left
turbosquid
$1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Eichholtz Prints
...of 4
2 - print dunbar 2 set of 4
3 - print guadeloupe 1 set of 4
4 - print guadeloupe 2 set of 4
5 - print giles
6 - print trett
3ddd
$1
Eichholtz Prints
...nt tutti frutti
3 - eichholtz prints watson - set of 2
4 - eichholtz prints antique nautilus - set of 2
5 - eichholtz print tiara
3d_export
$5
Monster for printing
...monster for printing
3dexport
monster 3d model printing
3ddd
free
printed rug
...printed rug
3ddd
ковер
very creative printed rug
3ddd
free
Eichholtz Prints
...иал: бумага
габариты (вхш): 72 x 62 см
описание: print sweetmeat - постер в деревянной раме.
3 - prints varsity set of 2
арти
3ddd
free
Art Print Posters
...art print posters
3ddd
прованс
art print posters by patrician prints