Thingiverse
external waste board adjustement R-CNC by Aze33
by Thingiverse
Last crawled date: 3 years ago
External adjustement for the wasteboard of the R-CNC.
You need bolt and screw M5x25 (I used 14).
Make some slots in the aluminium corners (see picture).
Try to adjust a little the aluminium corners before putting the waste board.
Unscrew every screw a bit.
Take a piece of wood or aluminium as a reference.
Start at a corner, put the reference under the spindle, use clamps to pull the board against the spindle and screw (I used my shoulder to push against the X axis when pulling the board).
Make a whole side, then the opposite side, and then last sides.
You need bolt and screw M5x25 (I used 14).
Make some slots in the aluminium corners (see picture).
Try to adjust a little the aluminium corners before putting the waste board.
Unscrew every screw a bit.
Take a piece of wood or aluminium as a reference.
Start at a corner, put the reference under the spindle, use clamps to pull the board against the spindle and screw (I used my shoulder to push against the X axis when pulling the board).
Make a whole side, then the opposite side, and then last sides.
Similar models
thingiverse
free
CNC Waste Layer + Mounting Brackets by uvwxy
... layer for cnc pcb milling. the mounting brackets are a little bit flatter than the waste layer to pull the pcb against the tray.
thingiverse
free
Snapmaker 2.0 wasteboard holder by bigwhizkid3
...screws from the heated bed and get a longer screw to go through the waste board and heated bed to secure it to the base platform.
thingiverse
free
OX CNC 65mm Spindle Holder (Trimmed Inner Corners) by mikeuk
...ox cnc 20/60 rail. uses 2x m5x20mm for holder and 1x m5x40 for holding spindle, i use a wings nut so i can tighten with one hand.
thingiverse
free
Corner for 2020(2040) profile for M3 screw
...3x10(hidden) screws cheaper than aluminium corners with m5x8 screws.
if you want the best stenght print on the side of the corner
thingiverse
free
65mm pen Adaptor for cnc router by ToxicCrowe
...crews for the side holes to hold the marker securely, i printed the holes smaller and used an m3 tap to put threads in the holes.
thingiverse
free
festool hose / CNC spindle attachement by buchnoun
...ple but it's working very well...
hope that might be useful as this kind of spindle is quite common on the diy cnc community.
thingiverse
free
XYZ CNC Probe by david2590
...be by david2590
thingiverse
this is a cnc probe, i designed it for my openbuilds lead cnc. i put aluminium tape to make contact.
grabcad
free
Root 3 CNC Spindle mount
...root 3 cnc spindle mount
grabcad
root 3 cnc 65mm spindle mount. use at you`r own risk!
grabcad
free
LCA Mini CNC applied for part edging machine
...akanishi am-300 r)
+ clamping fixture for hdd aluminium base casting parts
use for hdd aluminium casting parts edging process.
thingiverse
free
ShapeOko Level Adjust by SmartBlug
...t (perfectly fit with m4x10mm) and use a m6x70mm screw for the precise adjustment.
create 4 of this thing to put on every corner.
Aze33
thingiverse
free
e-cigarette stand by Aze33
...e-cigarette stand by aze33
thingiverse
simple e-cig stand for ego.
thingiverse
free
Washers guidance by Aze33
...ce of the washers) and everything went wrong. so i made these washers in order to keep the spool at the good place. now it works.
thingiverse
free
ToolMount M4 Nut adaptator by Aze33
... m4 nut adaptator by aze33
thingiverse
i didn't want to lost too much time with glue for the m4 nuts. i made this. it works.
thingiverse
free
renault trafic 3 phone holder by Aze33
... aze33
thingiverse
i remixed the nice design by helge_helgeson to use a very cheap and very common air vent phone holder < 1€
thingiverse
free
cable grommet for R-CNC different sizes by Aze33
...33
thingiverse
different sizes for cable grommets
[update] it was 1mm too big. now it's good and it's from 18mm to 35mm.
thingiverse
free
Mini Lathe Handle (turning handles) by Aze33
...ou'll understand that you need new handles, quick! these ones turn.
juste take 2 m5x30mm (allen key socket) screws and enjoy.
thingiverse
free
Drill Bit Sharpener Manual by Aze33
...rpen manually like at the end of this guide:http://www.instructables.com/id/sharpen-your-drill-bits/step16
2 files: 135° and 118°
thingiverse
free
Smartrapcore new jhead_attach [use the link in the description] by Aze33
...han this one:http://www.thingiverse.com/thing:969531
to avoid oozing, the fan must be lower. if your hotend is leaky, try this.
thingiverse
free
MPCNC 525 Chinese 52mm 500W Spindle Mount by Aze33
... strong and close to the gantry.
use m4x50mm bolts.
you can use 2 to 4 of them (i'm using 3 and it seems already overkilled).
thingiverse
free
MPCNC IE Tool Holder (fit my 25mm tube and my nuts) by Aze33
...y 25mm tube and my nuts) by aze33
thingiverse
the original part didn't fit my 25mm tube, neither my nuts. i made one for me.
Waste
3d_export
$5
waste cacamba
...waste cacamba
3dexport
waste cacamba
archibase_planet
free
Waste-basket
...archibase planet
waste-basket waste-paper basket dustbin
waste-basket s n250512 - 3d model (*.3ds) for interior 3d visualization.
turbosquid
$10
No Waste
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
waste
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Waste bin
... мусорница , урна
металлическая зелёная мусорница
3d_export
$15
waste plant construction
...waste plant construction
3dexport
waste plant construction,waste plant construction maya(mb) fbx
3d_export
$150
WASTE TANK
...waste tank
3dexport
turbosquid
$15
Waste Basket
...y free 3d model waste basket for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1576559)
turbosquid
$8
Barrels waste
...3d model barrels waste for download as max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1401230)
turbosquid
$2
Waste container
... model waste container for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1495589)
External
3ddd
free
External wall
...external wall
3ddd
забор
external wall of the villa in a classic style
3d_export
$7
mt external tee
...mt external tee
3dexport
mt external tee
turbosquid
$8
External mirror
...id
royalty free 3d model external mirror for download as fbx on turbosquid: 3d models for games, architecture, videos. (1638607)
turbosquid
$1
External HDD
...squid
royalty free 3d model external hdd for download as c4d on turbosquid: 3d models for games, architecture, videos. (1250314)
turbosquid
$10
Extern HDD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$10
External hard drive
... is a detailed model of a trekstor external hard drive. you can easily modify the label on the top. simply edit the text objects.
turbosquid
$4
External Hard Drive
...royalty free 3d model external hard drive for download as fbx on turbosquid: 3d models for games, architecture, videos. (1298038)
cg_studio
$10
External HDD3d model
...odel
cgstudio
.3dm .3ds .c4d .max .obj - external hdd 3d model, royalty free license available, instant download after purchase.
turbosquid
$5
External Hard Drive
...free 3d model external hard drive for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1520823)
turbosquid
$2
External hard disk
... free 3d model external hard disk for download as 3ds and obj on turbosquid: 3d models for games, architecture, videos. (1251009)
R
3ddd
$1
ORLANDO R
...orlando r
3ddd
новый стиль
новый стиль - orlando r
design_connected
$11
R-Table
...r-table
designconnected
henge r-table computer generated 3d model. designed by castagna, massimo.
design_connected
$7
Cone R
...cone r
designconnected
bonaldo cone r computer generated 3d model. designed by pasini, ennio.
3ddd
$1
R&B
...r&b
3ddd
r&b
спальный гарнитур r&b;
3d_export
$5
nissan gt-r
...nissan gt-r
3dexport
this is nissan gt-r
turbosquid
$10
R for ROBOT
...osquid
royalty free 3d model r for robot for download as max on turbosquid: 3d models for games, architecture, videos. (1694233)
turbosquid
$5
Letter r
...urbosquid
royalty free 3d model letter r for download as max on turbosquid: 3d models for games, architecture, videos. (1408525)
turbosquid
$5
Letter R
...urbosquid
royalty free 3d model letter r for download as max on turbosquid: 3d models for games, architecture, videos. (1408526)
3d_export
$5
react r
...r 9 lamps (6+3) ø 60 × 21 cm 12 lamps (9+3) ø 80 × 21 cm polys: 208 539 verts: 213 675 https://ru.lampachn.com/react-r-p0551.html
turbosquid
$40
R-73
...uid
royalty free 3d model r-73 for download as blend and fbx on turbosquid: 3d models for games, architecture, videos. (1620664)
Cnc
3d_export
$35
Cnc
...cnc
3dexport
the cnc machine is unfinished
3d_export
$10
cnc router
...cnc router
3dexport
prototipe cnc router
3d_export
$10
cnc machine
...cnc machine
3dexport
cnc machine model with individual model files with assembly
3d_export
$5
Cnc 3D Model
...cnc 3d model
3dexport
cnc
cnc 3d model csiszar 61289 3dexport
turbosquid
$10
cnc bedroom
...osquid
royalty free 3d model cnc bedroom for download as max on turbosquid: 3d models for games, architecture, videos. (1494981)
turbosquid
$9
cnc(wood)
...rbosquid
royalty free 3d model cnc(wood) for download as max on turbosquid: 3d models for games, architecture, videos. (1189189)
turbosquid
$1
CNC Frame
...rbosquid
royalty free 3d model cnc frame for download as stl on turbosquid: 3d models for games, architecture, videos. (1371706)
turbosquid
free
cnc table
...rbosquid
royalty free 3d model cnc table for download as max on turbosquid: 3d models for games, architecture, videos. (1500926)
turbosquid
$30
CNC Lathe
...
royalty free 3d model cnc lathe for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1284634)
turbosquid
$25
CNC Machine
...
royalty free 3d model cnc machine for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1307199)
Board
archibase_planet
free
Board
...e planet
board information board bulletin board
board information n310813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
board cutting board kitchen ware
board n051011 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
board blackboard school board
board school n290114 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
slate board
board - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
blackboard board school furniture
board - 3d model for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
board shelf stand
board - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
kitchen ware board
board - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
kitchen ware board
board n150410 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
board office supplies stationery
board - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Board
...board
archibase planet
board gym
board evminov n240613 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Adjustement
3d_ocean
$7
Adjustable Wrench
...adjustable wrench
3docean
adjustable wrench highly detailed wrench
highly detailed adjustable wrench.
3ddd
$1
Adjustable Stool
...adjustable stool
3ddd
табурет
wooden adjustable stool.
3d_ocean
$20
Adjustable Gym Bench
...st adjustable bench black equipement gym gymnastic indoor silver sport workout
3d model of black and silver adjustable gym bench.
3d_ocean
$20
Adjustable Gym Bench
...st adjustable bench black equipement gym gymnastic indoor silver sport workout
3d model of black and silver adjustable gym bench.
3d_ocean
$16
Adjustable Weight Bench
...arbell bench black equipement gym gymnastic indoor sport weight workout
3d model of black adjustable weight bench with a barbell.
turbosquid
$5
Adjustable wrench
...
royalty free 3d model adjustable wrench for download as fbx on turbosquid: 3d models for games, architecture, videos. (1313414)
3d_export
$5
adjustable tension lock
...adjustable tension lock
3dexport
adjustable tension lock
turbosquid
$1
Adjustable Wrench
...free 3d model adjustable wrench for download as obj and blend on turbosquid: 3d models for games, architecture, videos. (1446736)
turbosquid
$1
Adjustable Wrench
...y free 3d model adjustable wrench for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1379022)
3d_export
$5
Adjustable key
...adjustable key
3dexport