GrabCAD
Explosion Proof SPST Three Phase Starter Switch - Copper Free Aluminum - 30 Amp Rated - C1D1 C2D1
by GrabCAD
Last crawled date: 2 years ago
http://www.larsonelectronics.com/p-144659-explosion-proof-spst-three-phase-starter-switch-copper-free-aluminum-30-amp-rated-c1d1-c2d1.aspx
The Larson Electronics EPS-3P-30A-SPST Explosion Proof Three Pole Starter Switch is listed Class I Division 1 & 2 and Class II Division 1 & 2 and provides a safe and secure method for operators to use with contactors and magnetic starters to provide circuit selection and control for motors and equipment in hazardous locations. This 3-phase maintained starter switch is rated for a maximum of 30 amps at 250V and 20 amps at 600V and is constructed of cast copper-free aluminum.
This explosion proof starter switch is ideal for operators seeking a high quality explosion proof starter switch rated for use in hazardous areas designated Class I Division 1 and Class II Division 1. This explosion proof switch is rated at 30 amps at 250V and 20 amps at 600V. The entire unit is constructed of aluminum. This unit is easily wall mounted via integral mounting tabs at two corners of the housing and provides a 1/2" or 3/4" hub openings located on the sides of the housing for running electrical conductors in a feed through configuration. A bushing seal at each conductor opening prevents damage to wiring insulation.
This unit is rated to handle electrical loads of 250-600V AC up to 30 amps and is suitable for use in environments where flammable gases and vapors or combustible dusts and particulates may be present. The EPS-3P-30A-SPST is non-factory sealed.
The EPS-3P-30A-SPST explosion proof starter switch cover and housing box is constructed of cast copper-free aluminum with all arcing devices contained within an explosion proof labyrinth switch for the highest protection possible. This design does not require external sealing fittings. Two external mounting lugs provide simple and secure mounting of the unit to walls and flat surfaces. The unit box, switch, and face plate are all included with the product.
A 1/2" or 3/4" NPT tapped conduit opening is provided on the top of the unit, providing easy and secure connection to main power line supplies.
Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Lighting, Wet areas or Locations Where Combustible Dust is Present.
The Larson Electronics EPS-3P-30A-SPST Explosion Proof Three Pole Starter Switch is listed Class I Division 1 & 2 and Class II Division 1 & 2 and provides a safe and secure method for operators to use with contactors and magnetic starters to provide circuit selection and control for motors and equipment in hazardous locations. This 3-phase maintained starter switch is rated for a maximum of 30 amps at 250V and 20 amps at 600V and is constructed of cast copper-free aluminum.
This explosion proof starter switch is ideal for operators seeking a high quality explosion proof starter switch rated for use in hazardous areas designated Class I Division 1 and Class II Division 1. This explosion proof switch is rated at 30 amps at 250V and 20 amps at 600V. The entire unit is constructed of aluminum. This unit is easily wall mounted via integral mounting tabs at two corners of the housing and provides a 1/2" or 3/4" hub openings located on the sides of the housing for running electrical conductors in a feed through configuration. A bushing seal at each conductor opening prevents damage to wiring insulation.
This unit is rated to handle electrical loads of 250-600V AC up to 30 amps and is suitable for use in environments where flammable gases and vapors or combustible dusts and particulates may be present. The EPS-3P-30A-SPST is non-factory sealed.
The EPS-3P-30A-SPST explosion proof starter switch cover and housing box is constructed of cast copper-free aluminum with all arcing devices contained within an explosion proof labyrinth switch for the highest protection possible. This design does not require external sealing fittings. Two external mounting lugs provide simple and secure mounting of the unit to walls and flat surfaces. The unit box, switch, and face plate are all included with the product.
A 1/2" or 3/4" NPT tapped conduit opening is provided on the top of the unit, providing easy and secure connection to main power line supplies.
Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Lighting, Wet areas or Locations Where Combustible Dust is Present.
Similar models
grabcad
free
Explosion Proof Disconnect Switch - 30 Amp - (1) 2" & (1) 0.5" Cast Hubs - (3) 30 Amp 250V Fuses
...emical and petrochemical plants, storage areas, and other processing facilities where hazardous substances are handled or stored.
grabcad
free
30A Explosion Proof Switch - Class I, II, III - 480V 3PH - 20 HP Rating - NEMA
...nel disconnects on service entrance equipment, panelboards, switchboards, industrial control equipment and motor control centers.
grabcad
free
Explosion Proof On/Off Switch - Class I, Div. 1 & 2 - Class II, Div. 1 & 2 - 20 Amp Rated
...applications: manufacturing, industrial, warehouse, lighting, lighting, wet areas or locations where combustible dust is present.
grabcad
free
Explosion Proof Three Way Switch - Class I, Div. 1 & 2 - Class II, Div. 1 & 2 - 20 Amp Rated
...applications: manufacturing, industrial, warehouse, lighting, lighting, wet areas or locations where combustible dust is present.
grabcad
free
30A Explosion Proof Fused Disconnect - Fast Acting Fuse - (3) 30A 600V, (2) 1" NPT Hubs - N4X
...emical and petrochemical plants, storage areas, and other processing facilities where hazardous substances are handled or stored.
grabcad
free
Explosion Proof Switch - Class 1 Div 1 and Class 2 Div 1
...applications: manufacturing, industrial, warehouse, lighting, lighting, wet areas or locations where combustible dust is present.
grabcad
free
Explosion Proof Switch for EPL-48-2L Series
...applications: manufacturing, industrial, warehouse, lighting, lighting, wet areas or locations where combustible dust is present.
grabcad
free
Explosion Proof Combination Dimming/On/Off Switch - 0-10V Dimming - C1D1&2 - C2D1&2 - Class III
...applications: manufacturing, industrial, warehouse, lighting, lighting, wet areas or locations where combustible dust is present.
grabcad
free
3000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 480V 3PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
3000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 208V 3PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
C2D1
grabcad
free
3000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 480V 3PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
3000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 208V 3PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
3000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 208V 1PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
5000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 480V 3PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
3000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 240V 3PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
3000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 240V 1PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
Explosion Proof Control Station - C1D1/C2D1 - Local/Off/Auto 3-Pos Switch - 10k Ohm Potentiometer
...int spray booths, food manufacturing buildings, agricultural sites, grain storage centers, small motors, manual control and more.
grabcad
free
Hazardous Location Exit Sign - C1D2 - C2D1&2 - IP65 - 120V/277VAC - Green or Red Exit Sign
...rants making identification and location of exits in emergency situations easier than with typical self illuminated exit markers.
grabcad
free
Explosion Proof Red Crane Warning Laser- C1D1-2 - C2D1-2 - Surface Mount - 12-24V DC - Aluminum
...nal strips, completing the electrical connection.
applications: crane safety, crane measurements, crane warning system and more.
Spst
grabcad
free
SPST microswitch
...spst microswitch
grabcad
spst microswitch (no actuator)
grabcad
free
SPST Relay
...spst relay
grabcad
hf46f spst relay
grabcad
free
DIP Switch SPST
...dip switch spst
grabcad
78b08t is a regular 8pole spst dip switch
grabcad
free
DIP Switch SPST
...dip switch spst
grabcad
78rb08t is a regular 8pole spst dip switch with recessed buttons
grabcad
free
Commutateur DIP SPST
...commutateur dip spst
grabcad
commutateur dip spst, montage en surface actionneur glissière
grabcad
free
5V SPST RELAY
...5v spst relay
grabcad
5v, spst relay,
pcb mount,
5amps 250 vac,
5a 30vdc.
grabcad
free
MINI SWITCH SPST
...mini switch spst
grabcad
mini switch spst - kcd1-11
3a 250v
size 10x15mm
on / off
grabcad
free
SPST VISI-ROCKER SWITCH
...spst visi-rocker switch
grabcad
spst visi-rocker switch
grabcad
free
SPST 20mm Pushbutton Switch
...spst 20mm pushbutton switch
grabcad
spst 20mm pushbutton switch
grabcad
free
Momentary Pushbutton SPST N.O.
...momentary pushbutton spst n.o.
grabcad
simple momentary pushbutton spst
normaly open
C1D1
grabcad
free
Explosion Proof Enclosure, C1D1, 8'' x 12'' x 6'' Internal Dims, Surface Mount, N3R
...; in height. a removable backplate for easy mounting of equipment outside of the enclosure can be provided at an additional cost.
grabcad
free
Explosion Proof Cable Gland, 2" NPT, Nickel Plated Brass, 1.40-1.73" OD, C1D1 ATEX IEC Ex N4X
...ctions, cable fittings, explosive work sites, hazardous locations, instrumentation, telecommunication, cable management and more.
grabcad
free
Explosion Proof Cable Gland, 1" NPT, Nickel Plated Brass, 0.67-1.03" OD, C1D1 ATEX IEC Ex N4X
...ctions, cable fittings, explosive work sites, hazardous locations, instrumentation, telecommunication, cable management and more.
grabcad
free
3000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 480V 3PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
3000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 208V 3PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
3000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 208V 1PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
5000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 480V 3PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
3000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 240V 3PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
3000W Explosion Proof Heater - Forced Fan Heater - C1D1, C2D1 - 240V 1PH - 580 CFM
...chemical processing, cold-temperature facilities, farming operations, agricultural sites, flour processing, grain silos and more.
grabcad
free
Explosion Proof Cable Gland, 3/4" NPT, Nickel Plated Brass, 0.44-0.78" OD, C1D1 ATEX IEC Ex N4X
...ctions, cable fittings, explosive work sites, hazardous locations, instrumentation, telecommunication, cable management and more.
Starter
grabcad
free
Starter
...starter
grabcad
starter
grabcad
free
Starter
...starter
grabcad
jetski
grabcad
free
Gear in starter
...gear in starter
grabcad
gear in starter
grabcad
free
Chimney Starter
...chimney starter
grabcad
chimney starter
grabcad
free
Starter Ford
...starter ford
grabcad
starter ford
grabcad
free
electric starter
...electric starter
grabcad
racing engine starter
grabcad
free
Automatic starter
...automatic starter
grabcad
the automatic starter switch.
grabcad
free
Starter Box
...starter box
grabcad
a starter box for submersible pump.
grabcad
free
Starter Motor
...starter motor
grabcad
this is a project for the school. starter motor
grabcad
free
EVO Starter
...evo starter
grabcad
this is a 1.7 kw starter for a evo drive train
Explosion
grabcad
free
EXPLOSION
...explosion
grabcad
explosion
grabcad
free
EXPLOSIVE COTTAGE
...explosive cottage
grabcad
explosive cottage
grabcad
free
EXPLOSION DOOR
...explosion door
grabcad
explosion door
grabcad
free
Pouf Explosion
...pouf explosion
grabcad
pouf explosion
grabcad
free
Explosive pipe
...explosive pipe
grabcad
explosive pipes and adapter for petroleum exploration
grabcad
free
VAULT EXPLOSIVES.
...vault explosives.
grabcad
this vault is used to carry explosives to oil well of a save way.
grabcad
free
Anti-explosion Gate
...anti-explosion gate
grabcad
the task of the anti-explosion gate prevents the arrival of the explosion wave from place to place
grabcad
free
Explosive substances tank
...explosive substances tank
grabcad
explosive substances tank
grabcad
free
window explosion motion.
...window explosion motion.
grabcad
explosion by bullet firing
grabcad
free
Air Motor Explosion
...air motor explosion
grabcad
explosion of air motor
Proof
grabcad
free
PROOF
...proof
grabcad
proof that anyone can cut cartoons.....
grabcad
free
Speed Spots - Proof
...speed spots - proof
grabcad
proof
grabcad
free
Explosion Proof Cylinder
...explosion proof cylinder
grabcad
explosion proof cylinder for instruments
grabcad
free
Life proof case
...life proof case
grabcad
a bigger version of the life proof screw
grabcad
free
Storm Proof Hinge
...storm proof hinge
grabcad
storm proof hinge. height = 63
moving hinge and contact solver with inventor.
grabcad
free
Bluetooth water proof speaker
...bluetooth water proof speaker
grabcad
bluetooth water proof speaker
grabcad
free
Warning Light - Explosion Proof
...warning light - explosion proof
grabcad
warning light - explosion proof
grabcad
free
ATEQ Electrical tip proof
...ateq electrical tip proof
grabcad
ateq electrical tip proof
grabcad
free
Impeller pump proof of concept
...impeller pump proof of concept
grabcad
just a proof of concept, 3d printable
grabcad
free
Blast Proof Door
...blast proof door
grabcad
safety first
Copper
grabcad
free
Copper Tree of Copper Apples
...copper tree of copper apples
grabcad
copper tree of copper apples
grabcad
free
copper
...copper
grabcad
copper,铜钱,tongqian
grabcad
free
copper
...copper
grabcad
catia
grabcad
free
copper funnel
...copper funnel
grabcad
copper funnel
grabcad
free
copper port
...copper port
grabcad
copper port
grabcad
free
T Copper
...t copper
grabcad
t ,copper
grabcad
free
copper pipe
...copper pipe
grabcad
copper pipe
grabcad
free
Copper Coil
...copper coil
grabcad
copper coil
grabcad
free
copper coil
...copper coil
grabcad
copper coil
grabcad
free
Copper Bottle
...copper bottle
grabcad
copper bottle
Phase
grabcad
free
Phase 1
...phase 1
grabcad
phase 1
grabcad
free
PHASE - 5
...phase - 5
grabcad
milling fixture for phase 5
grabcad
free
phase motor siemens
...phase motor siemens
grabcad
phase motor
grabcad
free
phase 1
...phase 1
grabcad
..
grabcad
free
Three-phase motors
...three-phase motors
grabcad
three-phase motors
grabcad
free
Three Phase Motor
...three phase motor
grabcad
three phase motor
grabcad
free
single phase MCB
...single phase mcb
grabcad
single phase mcb
grabcad
free
Motor 1 Phase
...motor 1 phase
grabcad
motor 1 phase
grabcad
free
Three-phase fuse
...three-phase fuse
grabcad
three-phase fuse
grabcad
free
Bosch Phase Sensor
...bosch phase sensor
grabcad
bosch phase sensor
Rated
grabcad
free
door fire rated
...door fire rated
grabcad
door fire rated
grabcad
free
Dual Rate Coilover
...dual rate coilover
grabcad
14"x2.5" dual rate coilover. rough model
grabcad
free
Drying Rate Test Rig
...drying rate test rig
grabcad
test rig for obtaining drying rates of materials.
grabcad
free
ATEX RATED FLOURESCENT STRIP LIGHT
...atex rated flourescent strip light
grabcad
atex rated flourescent strip light
grabcad
free
Ex Rated Instrument Housing with Glass
...ex rated instrument housing with glass
grabcad
ex rated instrument housing - used for flow computers etc.
grabcad
free
Setup for Heat transfer rate of vehicle
...setup for heat transfer rate of vehicle
grabcad
this setup is for measuring the heat transfer rate of vehicles through radiator.
grabcad
free
Var-rate taper spring
...var-rate taper spring
grabcad
taper spring used in forklifts
grabcad
free
Clamp 5 Tonne Rating
...clamp 5 tonne rating
grabcad
clamp to operate compenstating arching motion.
grabcad
free
All terrain vehicle with dual rate suspension
...all terrain vehicle with dual rate suspension
grabcad
all terrain vehicle with dual rate suspension setup.
grabcad
free
Polar Heart Rate Monitor Strap Clip
...polar heart rate monitor strap clip
grabcad
polar heart rate monitor strap replacement clip for 3d printing.
30
grabcad
free
30
...30
grabcad
30
grabcad
free
profile 30*30 mm
...profile 30*30 mm
grabcad
profile 30*30
grabcad
free
Axial fan 30 by 30
...axial fan 30 by 30
grabcad
axial fan with 30 cross 30 dimesnion
grabcad
free
.30-30 Winchester cartridge
... cartridge
grabcad
a standard .30-30 winchester fmj cartridge.
solidworks 2012 - catia graphic - step ap214 - iges - e-drawning
grabcad
free
Perfil 30 x 30 mm
...perfil 30 x 30 mm
grabcad
30 mm x 30 mm
grabcad
free
ALUMINIUM PROFIL 30 X 30
...aluminium profil 30 x 30
grabcad
aluminium profil 30 x 30
grabcad
free
HINGE 30-30 ALUMINIUM PROFILE
...hinge 30-30 aluminium profile
grabcad
hinge 30-30 aluminium profile
grabcad
free
Hard Bracket 30*30 45
...hard bracket 30*30 45
grabcad
hard bracket 30*30 45 degree
grabcad
free
Model 30
...model 30
grabcad
30
grabcad
free
Corner Bracket 30*30
...a connection of 90 degrees at aluminium profile applications. an aesthetic appearance is achieved by attaching the plastic cover.
Three
grabcad
free
three-piece connected with three pins
...three-piece connected with three pins
grabcad
three-piece connected with three pins
grabcad
free
practice three
...practice three
grabcad
practice three
grabcad
free
Three tables
...three tables
grabcad
three tables
grabcad
free
THREE WOLF
...three wolf
grabcad
three wolf
***just 4 fun***
grabcad
free
Three Wolfs
...three wolfs
grabcad
three wolfs standing in a defensive stance.
grabcad
free
Three glass with three liquids
... render source file and more render images
https://www.cgtrader.com/free-3d-models/household/tools/three-glass-with-three-liquids
grabcad
free
three-piece connection
...three-piece connection
grabcad
three-piece connection
grabcad
free
Three-phase motors
...three-phase motors
grabcad
three-phase motors
grabcad
free
Three Phase Motor
...three phase motor
grabcad
three phase motor
grabcad
free
switch with three harbor
...switch with three harbor
grabcad
switch with three harbor
Aluminum
grabcad
free
aluminum
...aluminum
grabcad
aluminum
grabcad
free
aluminum
...aluminum
grabcad
aluminum furnace made in vietnam
grabcad
free
aluminum
...aluminum
grabcad
hallo
grabcad
free
Aluminum desk
...aluminum desk
grabcad
aluminum desk from aluminum sections and wood cover.
grabcad
free
88x88 Aluminum Extrusion and Aluminum Foot
...cad
this is a piece of 88mm x 88mm aluminum extrusion with an aluminum foot. im trying out a demo of keyshot rendering software.
grabcad
free
aluminum
...aluminum
grabcad
size 30x60
grabcad
free
shaped aluminum
...shaped aluminum
grabcad
shaped aluminum
grabcad
free
aluminum desk
...aluminum desk
grabcad
aluminum desk
grabcad
free
Aluminum Profile
...aluminum profile
grabcad
aluminum profile
grabcad
free
extruded aluminum
...extruded aluminum
grabcad
extruded aluminum
Switch
grabcad
free
Switch
...switch
grabcad
switch.
grabcad
free
switch
...switch
grabcad
switch
grabcad
free
Switch
...switch
grabcad
switch
grabcad
free
switch
...switch
grabcad
switch
grabcad
free
switch
...switch
grabcad
switch
grabcad
free
Switches
...switches
grabcad
switches
grabcad
free
switch
...switch
grabcad
the switch
grabcad
free
Switch
...switch
grabcad
switch
grabcad
free
switch
...switch
grabcad
switch
grabcad
free
switch
...switch
grabcad
switch
Free
grabcad
free
Free-modapk
...free-modapk
grabcad
free android gaming applications guide on https://free-modapk.com/
grabcad
free
Free form in free time
...
grabcad
solid2010/conceptual idea included reason of economy space and reduction of air dynamic ability for cooling rubber
grabcad
free
free energy
...free energy
grabcad
free energy
grabcad
free
free textures
...free textures
grabcad
free textures
grabcad
free
free remote
...free remote
grabcad
free remote
grabcad
free
free vice
...free vice
grabcad
free vice
grabcad
free
Free wheel
...free wheel
grabcad
free wheel
grabcad
free
free bear
...free bear
grabcad
free bear________________
grabcad
free
hand free
...hand free
grabcad
hand free
grabcad
free
FREE-CLAMP
...free-clamp
grabcad
free-clamp
Amp
grabcad
free
AMP.
...amp.
grabcad
amp.
grabcad
free
amp
...amp
grabcad
assy
grabcad
free
amp
...amp
grabcad
designed this for a speaker system
grabcad
free
Amp
...amp
grabcad
no real dimensions.
.jpg
.png
.sldprt
grabcad
free
guitar amp
...guitar amp
grabcad
guitar amp
grabcad
free
Guitar Amps...
...guitar amps...
grabcad
guitar amps............
grabcad
free
Tube amp
...tube amp
grabcad
tube amp chassis
grabcad
free
Burklin AMP
...burklin amp
grabcad
connector buerklin amp
grabcad
free
PHONE AMP
...phone amp
grabcad
phone amp designed for lg q7+
grabcad
free
Amps Regulator
...amps regulator
grabcad
true scale amps regulator for a project that i worked