Everest Gen7 Long bed pickup body mod by RedcatRacing

Last crawled date: 3 years, 1 month ago

A single cab truck conversion for your Everest Gen7! Choose from a tonneau cover version, or the version with the funny looking (but somewhat useful) bed! This is the follow on mod to the Short bed mod, which was posted first. https://www.thingiverse.com/thing:2752743
This is essentially the same modification, but it eliminates the second door. This is accomplished by gluing in a printed door handle plug and placing the body sticker that comes with the Gen7 body over the plug.
See the short bed mod for the install instructions, only difference being where to cut the roll cage, and to move the body cut line one door forward.
Redcat parts on Thingiverse are released under the Creative Commons License Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0).
We want to share these parts with the world, and we want to inspire people to make and share their own parts for their vehicles.

In keeping with the non-commercial clause of this license, if you produce this part (Long_bed.stl) for others, you may not receive compensation in excess of $23 per part, plus your shipping costs. This number is calculated based on an average estimate of material cost and machine running costs.
For part (Long_bed_tonneau.stl) the maximum compensation is $15.50 per part, plus your shipping costs.