Evercade stand - Large / complex by Clivvy

Last crawled date: 3 years, 4 months ago

large stand for Evercade Handheld Console. Formed and space for two carts plus magnetic charger port and cable routing and base to tidy things up.
I hot glued a magnetic charger cable - meaning if you dont get it spaced correctly you can more or less easily undo it.
You need to ensure the magnetic charger allows the removable USB connector to fit in and allow the console to sit on the stand, otherwise it will be wonky! Glue the base to the stand once you have the charger cable in place - so do some dry runs before gluing anything, then glue in the cable side insert to add accent and tidiness. Ensure you print the colours as you wish, the design is meant to be two colour to follow the base design of the Evercade console - but of course you can do what you want!
The design is meant to be partly a two colour print - main body and Evercade branding. The main body and branding should line up and be printed using two colours as thats much easier than doing two separate prints then gluing on the branding. I had zero problems using a Tenlog IDEX printer for the two colour print, you just have to check all your settings, slow it down, ensure the branding is set just below the main body print so that it prints the second colour very close to finishing that part of the model, otherwise you risk colour leak. Also check thin wall settings as the branding is very thing...
have fun!