EV100 ProDVR Strap Mount by marcotheboy

...ingiverse simple lightweight clip to mount the eachine ev100 micro av recorder to a 19mm strap of the eachine ev100 fpv goggles.

...his design holds onto the strap much more securely. to insert the strap into the slot, it helps to stretch it while inserting it.

...signed this to mount my eachine prodvr, that i soldered directly to the module in my fatshark attitude v2, to the fatshark strap.

...eachine prodvr mount for fatshark strap by robschii thingiverse eachine prodvr mount clip for fatshark strap

...oggle by thuankts thingiverse this is my design for eachine ev100 goggle . using rx5808 pro plus with achilles firmware version.

...u goggle strap case by pablobernardo thingiverse resized from original by danimal_fpv: https://www.thingiverse.com/thing:2781284

...lip by mobius85 thingiverse this was designed to clean up the placement of the dvr on my eachine ev100 goggles. hope this helps!

...dji goggle strap mount by jayduffin thingiverse dji goggle strap mount for standard fpv straps

...g flexible filament. designed for the eachine ev100 battery. extends the battery life of the fpv sj rg01 goggles about six times.

...eachine ev100 goggle case by wreckingball thingiverse simple box for eachine ev100 googles

...eachine prodvr mount for fatshark strap by robschii thingiverse eachine prodvr mount clip for fatshark strap

...signed this to mount my eachine prodvr, that i soldered directly to the module in my fatshark attitude v2, to the fatshark strap.

...properly the rca plug and 5v power supply, also there is a switch to see the video from rx and from dvr outpout. plug and play .

...iverse this is a case for my fatshark teleporter v5 mod. you can see the video here: https://www.youtube.com/watch?v=mpsi4dqgnqa

...used a red jst connector), the video out plugs to connect a display or your goggles, the two cinch sockets and the micro sd card.

...the cover one with a slot for an eachine prodvr and one without. the slots above the display and...

...ground station for guest. by adding a dvr (eachine prodvr with playback it becomes a sort of blackbox to...

...tx antenna (better version good for about 6 miles)https://www.readymaderc.com/store/index.php?main_page=product_info&products_id=1253 dvrhttp://www.banggood.com/eachine-prodvrpro-dvr-mini-video-audio-recorder-for-fpv-multicopters-p-1061196.html?rmmds=search small components main power switchhttps://www.radioshack.com/products/pushon-pushoff-sw rca out jack for...

...for 2s 6000mah.https://www.getfpv.com/samsung-30q-18650-3000mah-15a-battery.html the dvr is from amazon or ebay.https://www.amazon.com/crazepony-eachine-prodvrrecorder-quadcopter/dp/b01hgawwde/ref=sr_1_4?s=electronics&ie=utf8&qid=1518660278&sr=1-4&keywords=fpv+dvr the video and power switch https://www.amazon.com/gp/product/b008dfyhv2/ref=oh_aui_search_detailpage?ie=utf8&psc=1 axii antenna https://www.getfpv.com/lumenier-axii-mmcx-5-8ghz-antenna-rhcp.html...

...y camera with 14mm diameter lens. it is printed in tpu and fits snugly. the wide base makes it easy to grab when you pull it off.

...e cub ailerons. it is 2mm thick. the distance of the top hole to the aileron surface is 18mm. the diameters of the holes are 1mm.

...n to lose your needle adapter (for pumping footballs, etc). it fits on 10mm diameter hose. print in flexible filament (tpu, etc).

...are in a hot climate, it may be wise to print this in abs. (i printed one in pla and it did not warp in the british summer heat.)

...his design holds onto the strap much more securely. to insert the strap into the slot, it helps to stretch it while inserting it.

...collision with a wall. this should be much stronger than the original. i printed it in pla at 20% infill and it is strong enough.

... if you don't have the bearings, you can print this 'dummy' bearing instead:https://www.thingiverse.com/thing:2085033

...the stock m3x6 screws are just too short, so you should use m3x8 (or m3x10 to be safe). (the thickness of the mount base is 2mm.)

...//youtu.be/tpgpavs7ooe (in the photo/video i am using a runcam micro swift 2 camera and runcam tx200u video transmitter on 25mw.)

...ev100 by 3dprinteu thingiverse ev100 meene

...eachine ev100 goggle case by wreckingball thingiverse simple box for eachine ev100 googles

...ingiverse simple lightweight clip to mount the eachine ev100 micro av recorder to a 19mm strap of the eachine ev100 fpv goggles.

...rx5808 pro plus case for eachine ev100 by fanch_fpv thingiverse rx5808 pro plus case for eachine ev100

...lip by mobius85 thingiverse this was designed to clean up the placement of the dvr on my eachine ev100 goggles. hope this helps!

...his design holds onto the strap much more securely. to insert the strap into the slot, it helps to stretch it while inserting it.

...move your fpv goggles to start and stop the recording. must be printed in a flexible filament with a bit of stretch such as tpu.

...ev100 battery case with dvr by andili thingiverse just added a dvr holder to the battery support from macabox

...d probably fit the european head. and improved distance from the eye makes the entire image visible. it seems that fov is better.

...free 3d model strap dress for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1439318)

...e 3d model sofa with straps for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1353800)

...del strap knot for download as stl, fbx, 3ds, obj, x, and dae on turbosquid: 3d models for games, architecture, videos. (1667541)

... free 3d model applewatch strap storage for download as blend on turbosquid: 3d models for games, architecture, videos. (1232906)

...ist strap esd wrist strap n151114 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.

...brass strapped table lamp designconnected brass strapped table lamp computer generated 3d model.

... strap , latern double metal strap globe lantern ,la12024ir-01 h 785mm , w 753 mm

...ty free 3d model leather strap side table for download as max on turbosquid: 3d models for games, architecture, videos. (1473975)

... the long dress with a strap-loop for download as max and max on turbosquid: 3d models for games, architecture, videos. (1605631)

...del window strap winder (external) for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1281687)

...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

...fuji turbosquid free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)

...headphone mount lr 3dexport headphone mount l+r

...quid royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)

...quid royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)

...uid royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)

...pro mount 3dexport cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.

...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)