Thingiverse
ESP12 project box by bobtidey
by Thingiverse
Last crawled date: 3 years ago
A generic project box for ESP-12F modules which I use for temperature sensing and IR blasting.
The SCAD design allows for several variations.
Powering from an internal mini AC power brick or USB powered with 5 to 3.3V converter
Options for DS18B20 temperature sensor connection and IR blaster.
A separate SCAD has DS18B20 cable parts.
For USB powering I use a micro USB connector with easy solder connections combined with a mini adjustable down converter to give 3.3V.
For mains powering I use HLK-PM03 modules which are about the smallest one can get. I connect with a solderable 500mA slow blow fuse and secure the cable on the inside of the housing with a tie wrap.
The temp sensor connector I use is a 3 pin IC socket connector. The hole is a fairly tight fit but I add a little bit of resin glue to secure it.
I make a little board for the LED blaster which has a MOSFET driver (I use a AO3400) so that the logic from the ESP8266 can switch on to give a good current (80mA) through the LED.
The DS18B20 cable parts allow the sensor to be a bit remote and avoid any local warming.
The SCAD design allows for several variations.
Powering from an internal mini AC power brick or USB powered with 5 to 3.3V converter
Options for DS18B20 temperature sensor connection and IR blaster.
A separate SCAD has DS18B20 cable parts.
For USB powering I use a micro USB connector with easy solder connections combined with a mini adjustable down converter to give 3.3V.
For mains powering I use HLK-PM03 modules which are about the smallest one can get. I connect with a solderable 500mA slow blow fuse and secure the cable on the inside of the housing with a tie wrap.
The temp sensor connector I use is a 3 pin IC socket connector. The hole is a fairly tight fit but I add a little bit of resin glue to secure it.
I make a little board for the LED blaster which has a MOSFET driver (I use a AO3400) so that the logic from the ESP8266 can switch on to give a good current (80mA) through the LED.
The DS18B20 cable parts allow the sensor to be a bit remote and avoid any local warming.
Similar models
thingiverse
free
Big segmentical clock
...osfet and step up transformer.
to power the watch i used an old laptop charger (19v, 4.5a) with a step down transformer - xl4015.
thingiverse
free
Wemos D1 Mini DS18B20 temperature sensor enclosure by EverythingSmartHome
... a couple of degrees.
the only additional parts you need are 2 x m3 screws.
full guide to making this temperature sensor is here.
thingiverse
free
Power Supply Enclosure for DP20V2A by svenbeb
...desk. to build it you need the dp20v2a (or similar, two lm2596 for 5v and 3.3 conversion (i used...
thingiverse
free
XT60 2-6S to USB converter by Unboxingexperience7
...ctronics and a plug. simply put the module with the soldered xt60 female connector into the body and then cover it with the plug.
thingiverse
free
DS18B20 housing
...20 and many others. just simply shorten ds18b20 pins, solder wires and seal connecting with resin or hot glue inside the housing.
thingiverse
free
RGB LED sensor & IR Blaster Housing by Dazzer
...om to make this. you will need to cut off the remote sensor and solder on some connectors to make the system much easier to fit.
thingiverse
free
RFM Moteino 3 in 1 sensor by thingsvrs8383
...om of this board to avoid shorting out on the moteino.
dth11 digital temperature humidity sensor module
3.7v 650mah lipo battery
grabcad
free
Temperature-Sensor Module (joy-it, KY-001, DS18B20)
...-bit celsius temperature measurements and has an alarm function with non-volatile, user-programmable high and low trigger points.
grabcad
free
Airpatrol Module
...ll control buttons on front visible face. usb connector and slot for ventilation / temperature and humidity sensor on lower face.
grabcad
free
AirPatrol Controller Case v2
...n indicates power status) and built in temperature and humidity sensors. mini usb connector will be below the device facing down.
Bobtidey
thingiverse
free
Capacitor Meter by bobtidey
...ure for an attiny capacitor meter.
construction details at instructables
https://www.instructables.com/attiny85-capacitor-meter/
thingiverse
free
Bridge test by bobtidey
...the openscad file to make it easier to change dimensions, like the length, width, size of the bridge steps and gap between steps.
thingiverse
free
AutoWater ESP8266 by bobtidey
...ails at https://www.instructables.com/id/battery-powered-plant-watering/
esp software at https://github.com/roberttidey/autowater
thingiverse
free
Array of Pins by bobtidey
... single layer flat base with little tabs so they can be clipped out easily but stabilize it for printing when the pins are small.
thingiverse
free
Coffee Filter Paper holder by bobtidey
... coffee filters.
stl is for up to 100 size 4 papers but could be changed in the scad to suit different size papers or quantities.
thingiverse
free
Tiny IR Remote by bobtidey
...at https://github.com/roberttidey/attinyir
instructable at https://www.instructables.com/at-tiny-techniques-in-a-macro-ir-remote/
thingiverse
free
Mathematical Clock by bobtidey
...ficial rim to allow a skirt to be used on the face. see instructions.
a second version of the face has tick marks on the hours.
thingiverse
free
esp8266 clock generator by bobtidey
...e it to conatin a flexible clock / pulse generator as described
https://www.instructables.com/esp8266-clock-and-pulse-generator/
thingiverse
free
Rainbow Dice Box by bobtidey
...ace for the esp-12f controller
full construction details will be on instructables.
https://www.instructables.com/id/rainbow-dice/
thingiverse
free
Digitally controlled power supply by bobtidey
...operation via web browser.
construction is at instructables https://www.instructables.com/digital-controlled-bench-power-supply/
Esp12
thingiverse
free
D1M BLOCK - ESP12 by IOT123
...ing, and 2 off 8 pin 10mm long needle female pin header strip are required for this build.
instructions
code examples
d1m blocks
thingiverse
free
ESP12 Pogo Adapter by pbwns20
...ft, then on the right to prevent heating the plastic too much. let it cool a bit. then turn around in the vise for the other side
thingiverse
free
Prototyping harness for ESP12E by ycomet
...pring pins will work even better.
once that is done you can simply sandwich your esp12e in and secure it with the retainer clips.
thingiverse
free
Socket ESP8266 (ESP12E) by fandres7_7
...ions
based on the work of wdwhite
step file by by_andrey_chirva
see commit details to find the authors of each part.
@fandres7_7
thingiverse
free
CurrentCost ESP12E circuitry box (CC128, EnviR) by saturno
...unication from the energy sensor is received by the esp12.
the code is highly based on the shared project form dontnetdann, here.
thingiverse
free
ESP12 (E/F) Programming Clamp by madtheos
...pport the move to metric, but 2 mm pin pitch certainly does make the esp12 hard to breadboard for programming. hence this design.
thingiverse
free
ESP12 Soldering free connection thing by kungfux
...e
header pins are made from paper clips. paperclips rod diameter is .8mm, so i made holes same diameter, so they fit very tight.
thingiverse
free
ESP12 holder - slim, medium and large by jhawkn8r
...out. the other two should allow for you to house the wires entirely in the box and route them out one of the two holes.
enjoy!
thingiverse
free
ESP12-E Wireless Clock - WS2812b housing by gunkl
...d to enable local echo.
to do
add daylight savings support
make a new lid design that's a little more aesthetically pleasing.
Box
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
carton cardboard box box
box 1 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$6
box
...box
3dexport
box
3d_export
$5
Box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
archibase_planet
free
Box
...box
archibase planet
box box for paper notebook pencil
box - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n170111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n050411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Boxes
...boxes
archibase planet
boxes box case bin
boxes n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
Project
3d_export
$7
project
...project
3dexport
project
3d_export
$20
Project
...project
3dexport
design_connected
$16
Project Chair
...project chair
designconnected
rex kralj project chair computer generated 3d model. designed by žitnik, marjan.
3ddd
$1
lectric Project
...настроены. сетка очень плотная.
доступно только для группы "profi"
про группу "profi" можно прочитать в чаво
3d_ocean
$19
Soon project
...kup. made in 3ds max 2013 1- 3dsmax with vray render included material and light 2- obj file 3- fbx file hope you like it plea...
turbosquid
$49
Joint | Project
...squid
royalty free 3d model joint | project for download as on turbosquid: 3d models for games, architecture, videos. (1297983)
turbosquid
$11
house project
...bosquid
royalty free 3d model house project for download as on turbosquid: 3d models for games, architecture, videos. (1672482)
turbosquid
$450
University project
...
royalty free 3d model university project for download as rvt on turbosquid: 3d models for games, architecture, videos. (1463354)
turbosquid
$30
smart projecter
...lty free 3d model smart projecter for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1236214)
3d_export
$5
project drawing
...project drawing
3dexport
project drawing and 3d model<br>format jpg sldprt dwg<br>by 3d make