Thingiverse
ePrinter 0.9 by mindstormmaster1
by Thingiverse
Last crawled date: 3 years, 1 month ago
The goals of this printer are simple to take as many parts from my Prusa i3 and turn them into a CoreXY printer and if my design failed I could simply rebuild the Prusa print new parts and try again. This means the motors, the linear rods, and electronics are all reused and left in their original state.
The frame will originally be made from 0.5" MDF. Later I will be releasing a frame made with HobbyKing aluminum extrusion.
So what was added new? Well an E3D hot end without a doubt! As well as the linear bearings have been replaced with bushings. The head unit has holes that are universal to fit both direct drive and bowden and possible a laser later.
This printer is not a 100% original or 100% a simple remix. It is a blend or different ideas and different printers.
All the files for the printer can be seen at OnShape and they will be updated from time to time.https://cad.onshape.com/documents/49a05930080e666fde9d2387/w/c5c347e96b8ab061dbf1a81c/e/e4dc13665934bc55e8ed2eed
The frame will originally be made from 0.5" MDF. Later I will be releasing a frame made with HobbyKing aluminum extrusion.
So what was added new? Well an E3D hot end without a doubt! As well as the linear bearings have been replaced with bushings. The head unit has holes that are universal to fit both direct drive and bowden and possible a laser later.
This printer is not a 100% original or 100% a simple remix. It is a blend or different ideas and different printers.
All the files for the printer can be seen at OnShape and they will be updated from time to time.https://cad.onshape.com/documents/49a05930080e666fde9d2387/w/c5c347e96b8ab061dbf1a81c/e/e4dc13665934bc55e8ed2eed
Similar models
grabcad
free
Large frame for Prusa i3 Reprap
...p
grabcad
original frame for prusa i3 has dimensions 370x370mm.
i maked a new large frame for my 3d printer.
new has 500mm high.
thingiverse
free
Remixed for Prusa Mk2 Printer by KnightDS
... raspberry pi 4 on my mk2. this is remixed from the original mk3 version as the mk2 frame has different mounting hole locations.
thingiverse
free
Large frame for Prusa i3 Reprap by LA72
...ngiverse
original frame for prusa i3 has dimensions 370x370mm.
i maked a new large frame for my 3d printer.
new has 500mm high.
thingiverse
free
Original Prusa i3 MK2 V-Slot Frame by mattling9
...and 20x40mm v-slot extrusion frame. this design is somewhat similar to the 3030 haribo mod, however 3030 extrusions are...
thingiverse
free
Prusa i3 Motor Z bottom support by iPa64
...spare part for prusa i3 frame 8mm
on my original part the 8mm hole was not parallel, so i made a new one, now it's perfect.
thingiverse
free
Bearing Holder Anet bed frame
...sa clone 3d printer bed frame then here you can find it. i have adjusted the holder itself because of the clamps were a bit thin.
thingiverse
free
Spool Holder for TRONXY Prusa i3 P802MA by ZeroDragon
...frame (7mm)
originally this 3d printer came with an extra part for holding the spool, but i wanted to keep it all close and neat.
thingiverse
free
BQ Prusa i3 Blower by stoto
...g buildplate" support in cura.
works fine so far, it did not melted or deformed in any way (tried 6+ hours prints as well).
thingiverse
free
PTFE Filament Guide for the Original Prusa i3 MK2 by sunbart
...t from prusa 3d themselves which adds an endpoint for a regular ptfe bowden tube at the top of the printer frame, above the psu.
grabcad
free
SFU1204 600mm total lenght with end supports
... supports
grabcad
not 100% precise used in my 3d printer design. i made it from different other parts published here on grabcad.
Eprinter
grabcad
free
HP DesignJet T520 ePrinter 610 мм (CQ890A)
...по внешнему виду он имеет несколько отличий от designjet t120, он также доступен и в модификации hp designjet t520 36 формата a0.
3dwarehouse
free
HP Envy 100 with e-Print
...e-print 3dwarehouse hp envy 100 e-printer #100 #computer #computers #eprinter #email #envy #hp #print...
3dwarehouse
free
Islamic Villa
... internal open courtyard, with solid external wall containing a door. http://irep.ntu.ac.uk/id/eprint/32462/1/9925_abdelmonem.pdf
3dwarehouse
free
HP LaserJet Pro 400 color
...#eprint #fotocopiatrice #hp #laser_jet #multifunction #multifunzione #office #print #printer #scanner #stampa #stampante #ufficio
3dwarehouse
free
HP LaserJet Pro 400 color
...#eprint #fotocopiatrice #hp #laser_jet #multifunction #multifunzione #office #print #printer #scanner #stampa #stampante #ufficio
Mindstormmaster1
thingiverse
free
ePhone Stand MK1 by mindstormmaster1
...ormmaster1
thingiverse
a simple phone stand that should work for any phone which has a charging port in the center of the phone.
thingiverse
free
Zen Wobble Egg by mindstormmaster1
...t the bottom. this way it will always right itself. a bit tricky to make your slicer not fill the top, but it should be possible.
thingiverse
free
Stack-able Star Trek Coasters by mindstormmaster1
...trek coasters by mindstormmaster1
thingiverse
do you love star trek and hate watermarks? then do i have a design for you! enjoy!
thingiverse
free
7 to 10 Phone Holder by mindstormmaster1
...ook nice and neat? how about 10 phones? well then do i have the product for you! our one of a kind phone holder can do just that!
thingiverse
free
Carcassonne Classic Box Plates by mindstormmaster1
...ible to fit more, but with nine pieces per plate if something goes wrong you are not out a full day.
thanks and i hope you enjoy!
thingiverse
free
Travel Catan Ready To Print by mindstormmaster1
...i tried to keep everything as close to the center as possible to help with an unevenness at the edges of your build plate.
enjoy!
thingiverse
free
HTC Desire 510 Wall Phone Holder by mindstormmaster1
...that i could put my phone on the wall next to my bed to easily turn off the alarm as well as use my phone as a clock if i wanted.
3dwarehouse
free
my house
...house 3dwarehouse this is a craze good house #lego #mindstormmaster1 ...
0
turbosquid
$12
Calligraphic Digit 0 Number 0
...hic digit 0 number 0 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389318)
3d_export
$6
set-0
...set-0
3dexport
turbosquid
$6
hedge 0
...yalty free 3d model hedge 0 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1450353)
turbosquid
$5
Nuber 0
...oyalty free 3d model nuber 0 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1564674)
turbosquid
$22
0.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Steam Locomotive Fowler 4F 0-6-0
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Liquid Number 0
... model liquid number 0 for download as c4d, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1689919)
turbosquid
$45
Dragon360_perspShape_tmp.0.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Rocks Debris 0
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$18
wood-guardrail-fence 0
...wood-guardrail-fence 0
3dexport
wood-guardrail-fence 0<br>3ds max 2015
9
3ddd
$1
9
...9
3ddd
консоль
9
turbosquid
$40
Apple iPhone 9 & 9+
...del apple iphone 9 & 9+ for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1284550)
turbosquid
$12
Calligraphic Digit 9 Number 9
...hic digit 9 number 9 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389349)
3ddd
$1
PLANTS 9
...plants 9
3ddd
папоротник , кашпо
plant 9.. hope u all like it
design_connected
$11
194 9
...194 9
designconnected
194 9 computer generated 3d model. designed by lissoni, piero.
design_connected
free
Tangram 9
...tangram 9
designconnected
free 3d model of tangram 9 by lago designed by lago, daniele.
design_connected
$11
Domino 9
...domino 9
designconnected
zanotta domino 9 computer generated 3d model. designed by progetti, emaf.
design_connected
$20
Docks 9
...docks 9
designconnected
gandia blasco docks 9 computer generated 3d model. designed by romero vallejo.
3d_export
$80
mq-9
...mq-9
3dexport
3d_export
$6
washbasin-9
...washbasin-9
3dexport