Engine Benchmark Remix by Daniel_Pl

Last crawled date: 3 years, 5 months ago

I created a very light remix (only one cylinder), in order to minimize the printing time :
Dimensions: 31x27xH49 mm
It is both a very original decorative object, a model explaining how a classic 4-stroke engine works, but it's also a ruthless test for your printer because the motor block is printed in one go !
After multiple attempts to get a good print, I finally used a raft because all the other printing options failed (my printer has no hot bed)...
Once you have finished printing, you will have to dazzle the creation with a scalpel :
at the bottom of the piston, a small strip to be deleted
at the bottom of the connecting rod, same
all operating axes
piston contacts with the cylinder
Finally tap on the top of the piston so that it can move
But in the end, what a pleasure to see this engine running !
I added a crank for fun but this accessory is not essential
You can use a screwdriver for high speed rotation!
You can enlarge the 3 objects in your slicer (in the same proportions of course!)