Thingiverse
Ender 5 SKR / GenL Mount by Khtarg
by Thingiverse
Last crawled date: 3 years, 4 months ago
I made this mount to fit a SKR V1.4 Turbo to my Ender 5.
It is based on TeachingTech's Simple Adaptor which did noch fit in my Printer, probably because Creality changed from Meanwell to Landis PSU.
Besides the SKR also the MKS Gen_L and Sgen_L and any other board with similar mounting points can be used.
If you use this mount, the SD Card an the USB port are no longer accessible without opening the Control Box.
As i use OctoPrint, i do not feel the need to get in touch with the SD Card and I have an USB cable coming out of the hole for the display cable.
Wondering why my Control Box is not between the extrusions? Check my Ender 5 Control Box rear mount
Parts needed for mounting:
3x M3 nut which should go tight into the mount
3x original board screw (those flat screws leave enough clearance for the bottom of the new board)
4x M3x10mm screws
There are only 3 nuts, because one mountinghole uses a stock mountingpoint.
It is based on TeachingTech's Simple Adaptor which did noch fit in my Printer, probably because Creality changed from Meanwell to Landis PSU.
Besides the SKR also the MKS Gen_L and Sgen_L and any other board with similar mounting points can be used.
If you use this mount, the SD Card an the USB port are no longer accessible without opening the Control Box.
As i use OctoPrint, i do not feel the need to get in touch with the SD Card and I have an USB cable coming out of the hole for the display cable.
Wondering why my Control Box is not between the extrusions? Check my Ender 5 Control Box rear mount
Parts needed for mounting:
3x M3 nut which should go tight into the mount
3x original board screw (those flat screws leave enough clearance for the bottom of the new board)
4x M3x10mm screws
There are only 3 nuts, because one mountinghole uses a stock mountingpoint.
Similar models
thingiverse
free
Ender 5 Control Box rear mount by Khtarg
...s to the frame
6 screws m5x10 (length does not really matter) to fix the control box to the mount. stock screws will be too long.
thingiverse
free
Ender 5 Plus SKR Turbo 1.4 Standoff/Mount by davidkobey
...flush with the heater control mosfet and leaves margin on the side for usb cable.
requires - the 4 original screws + 4 m4 screws.
thingiverse
free
Robo3D R1+ / Bigtreetech SKR Pro Adapter Mount by rodsmith
...screws. very helpful items include: 1x usb extension cable, similar to https://www.amazon.com/gp/product/b071p2bgk5/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=utf8&psc=1 1x micro-sd extension cable, similar to https://www.amazon.com/gp/product/b085hgtjwt/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=utf8&psc=1...
thingiverse
free
Ender 3 SD Card cable Adaptor Extension by jaruwit
...om/thing:2943750.
it use only micro sd card.
i remix to fit my sd card adaptor cable. and add bottom plate to protect flat cable.
thingiverse
free
USB Micro SD and SD Card Holder for Ender 3 by Mikaelangelo
... needed a place where i can put my usb sticks and my sd cards so i won´t loose them all the time.
3x usb type a
4x micro sd
1x sd
thingiverse
free
Ender-5 Micro SD Card Extension Box
...gp/product/b072x27v58/ref=ppx_yo_dt_b_asin_image_o05_s00?ie=utf8&psc=1
used 2-m3 x 8 screws and 2 m3 t slot nut to secure it.
thingiverse
free
SKR V 1.3 dual fan adapter for CR10
...e controlbox, you can feed the flex cable from a micro sd to sd adapter in underneath the mount to use the onboard micro sd slot.
thingiverse
free
Ender 3 LCD Box
...screws and t-slot nuts.
you will need a new power cable, i used 12 gauge wire. might also need longer y axis motor/endstop wire.
thingiverse
free
Ender Extender LCD Box by EnderExtender
...oard in one box. attach to the side of the ender 3 with m5 screws and tslot nuts.
works with skr boards and stock ender 3 boards
thingiverse
free
Ender 3 USB/SD/MicroSD Card Holder
...sd cards.
if it doesnt fit snugly enough for you, you can wrap a piece of masking tape over the edge of the control board panel.
Genl
thingiverse
free
support motherboard MKS GENL v2.0 and 2.1 for AM8 printer by xenon2
...mosfet and for motherboard. you need spacer. you can adjust high as you want. the spacer of mosfet is more high than motherboard.
thingiverse
free
Tevo Nereus LCD case mount adapter
...nereus. robin nano stock board was swapped to a genl to be able to use the...
thingiverse
free
HyperCube 300/235 v2.0 SKR Control Box by adrianm1972
...printer! this works will all controllers from the mks genl 8 bit to the srk 1.3, 1.4, 1.4 turbo...
thingiverse
free
Temperature Controlled Stepper Cooling For Sidewinder X1 by ShomarrFPV
...recommend it because its very loud. fits on mks genl holder from rics3d too, if u have that mod...
thingiverse
free
Ender 3 MKS Gen L frame with micro USB connector by gtortone
...pins and gnd available on aux-1 connector (see mks genl pinout) then use three cables to connect micro usb...
thingiverse
free
Filament Welder by Tada3
...tried 1.9mm tube, https://www.aliexpress.com/item/1005001370675514.html, and works better) (3) mks genl with tft32 (4) 12v power supply. i used 40w...
thingiverse
free
Tevo Tarantula Pro Filament Runout Sensor From Z Endstop
...to 19 this was done on the stock mks genl that came with the ttpro. if you changed your...
thingiverse
free
V1.0 Scalar - Electronic Box for MKS GEN 1.4 / MKS GEN L + LCD2004 + RPI3 by 3DModularSystems
...compatible with : mks gen 1.4 (http://3dmodularsystems.com/en/eletronic-boards/514-mks-gen-14-controler-board-for-3d-printer.html) mks gen-l (http://3dmodularsystems.com/en/eletronic-boards/515-mks-genlcontroler-board-for-3d-printer.html) rrd lcd2004 (http://3dmodularsystems.com/en/electronic/65-reprapdiscount-lcd-2004-4x20-caracters-for-ramps-14-3d-printers.html) 60mm / 40mm fan (http://3dmodularsystems.com/en/eletronic-components/341--3500rpm-60mm-12v-fan-143cfm.html) raspberry...
grabcad
free
SHOEMA SHUNTER DIESEL LOCO
...narrow 6020-001 gauge railways scale 1:6 gauge 184mm (7.25") genl arrangement 4 01-wheel 2 02 wheel axle 1 03a-l-h-side...
Skr
turbosquid
$130
Fenerbahce Stadyumu - Skr saracoglu stadium
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Box SKR V1.3 & SKR V1.4 - Ender 3
...sfrutta il coperchio originale in metallo.
english:
box skr v1.3 and skr 1.4 for ender 3 standard, uses the original metal cover.
thingiverse
free
Mount for the Bigtreetech SKR 1.3
...mount for the bigtreetech skr 1.3
thingiverse
mount for the bigtreetech skr 1.3
thingiverse
free
AM8 box SKR 1.3
...am8 box skr 1.3
thingiverse
box for am8 printer with skr 1.3 and 1 mosfet.
thingiverse
free
SKR TFT35 lid by Foxx_PL
...ingiverse
remixed lid for skr pro xxl coltroller box. it includes place for 80mm fan, skr tft35 and two lm2596 dc-dc converters.
thingiverse
free
Tatara SKR 1.3 case
...tatara skr 1.3 case
thingiverse
modification for skr 1.3 board and tatara frame with 120mm fan.
thingiverse
free
Anycubic Chiron skr mount
...anycubic chiron skr mount
thingiverse
skr 1.3 mount plate for anycubic chiron. for usb drill a hole.
thingiverse
free
SKR E3 DIP box by srprint
...skr e3 dip box by srprint
thingiverse
skr e3 dip
thingiverse
free
BTT SKR v1.1 case by atiszoft
...btt skr v1.1 case by atiszoft
thingiverse
bigtreetech skr v1.1 mainboard case.
thingiverse
free
SKR pro V1.1 Housing
....3 and v1.4 are also available. https://www.youtube.com/watch?v=f7b39z-rley
donation appreciated https://www.paypal.me/klauskorte
Ender
3ddd
$1
Enders / Elegance
...enders / elegance
3ddd
обогреватель
уличный газовый обогреватель enders elegance
высота: 2200 мм
3d_export
free
ender 3 frame cavity covers
... of the creality ender 3 - makes it look a bit more attractive it just slides into the open channels of the aluminium framework
turbosquid
$1
pen support for ender 3
...y free 3d model pen support for ender 3 for download as blend on turbosquid: 3d models for games, architecture, videos. (1611282)
3d_ocean
$9
Ender Dragon Minecraft
...ojang obj poly videogames
ender dragon minecraft created with cinema 4d r15 formats included: max 2013 – fbx 2012 – c4d r15 – obj
3d_export
free
Creality ender enclosure webcam mount
...e creality enclosure. sure is better than a tripod. change it up if it helps. i printed pla with 50% infill on my dd ender 3 pro.
3d_export
free
ender 3 enclosure corners
...er corners and 4 upper corners, using 25mmx25mm angled aluminium pieces that gets covered on inside of the frame with plexiglass
3d_export
free
ender 3 3d print bed clips
...ed + normal aluminium bed frame of the creality ender 3 = 6mm (b) these clips are designed for glass plate + aluminium bed = 4mm
3d_export
$5
GRUMPY CAT
...grumpy cat 3dexport grumpy cat to print in ender ...
3d_export
$5
Logs fire
...with one multi material for corona and vray r ender. albedo, normal, uvmap, roughness format jpg 4096x4096 models:...
3d_export
$42
excavator
...is the original size. 0.12 mm printing surface creality ender5 ...
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
5
turbosquid
$6
Rock 5-5
...urbosquid
royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)
3d_export
$5
hinge 5
...hinge 5
3dexport
hinge 5
turbosquid
$10
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Calligraphic Digit 5 Number 5
...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)
3ddd
$1
5 роз
...5 роз
3ddd
5 роз в стеклянной вазе
design_connected
$11
iPhone 5
...iphone 5
designconnected
apple iphone 5 computer generated 3d model.
3ddd
$1
Lola 5
...lola 5
3ddd
miniforms
lola 5 miniforms 300*65*134
3ddd
$1
Nexus 5
...dd
nexus , phone , телефон
google nexus 5 phone
3d_ocean
$15
iPhone 5
...iphone 5
3docean
3d 4d apple cinema iphone model modeling phone screen texture
iphone 5 3d model and texture realistic iphone 5.