Ender-5 Big Cooler by IamSLy

Last crawled date: 3 years, 2 months ago

Big Cooler for the Creality Ender-5.
Compatible with the original hot-end and the Micro-Swiss all metal hot-end.
Extra parts needed:
Chinese blowing fan 40mm x 20mm
Some M3 screws:
4 M3 x 20mm screws
2 M3 x 14mm screws (*)
1 M3 x (8mm ~ 12mm) screw
1 M3 x (6mm ~ 8mm) screw
2 M3 Nuts

Some printed parts need to be glued together in this order:
Blower Duct in the Blower Base
Blower Shell on the Blower Base + Duct
Blower Spacer on the Blower Shell
Blower Attach on the Blower Shell
Printing:
No supports are needed.
Have the "Horizontal Expansion" slicer setting calibrated as I added no clearance.
(*):
These screws need to go through the slot of the Ender-5 shuttle plate. Take cheap ones as the quality ones have a thread too wide and will not go through the slot.