Thingiverse
Ender 3 v2 4040 4020 V-slot Service stands standoffs by bryfdir
by Thingiverse
Last crawled date: 3 years, 1 month ago
To work underneath the machine is rather awkward, it doesn't stay still when placed on a table and makes life awkward.
I searched for some standoffs but couldn't find anything (which I find surprising, as all of this really annoyed me!).
I decided to make some quick standoffs that clear the Ender 3 V2 control screen and the x-axis belt adjustment. I fitted them to the right hand side by the screen, there's nothing stopping you from fitting them on the left hand side if you desire, or even both sides if you need to flip the machine from side to side!
I made three sizes, all 95mm long with 5mm thick bases.
The sizes refer to the size of the base, so the 40 20 is 40mm by 20 mm, to fit the vertical extrusion.and has two mounting holes.
The 40 30 fits nicely behind the control screen and has four mounting screws as it fits a 40mm wide rail.
the 40 60 is just a larger one with a larger diameter standoff, again four holes, the 40 30 could be used instead of this one.
I used M4 x 10mm screws with standard T-nuts, this means they hold tight but are easily removed if required, the smaller one on the vertical extrusion is the only one you would have to remove, if you were making a tall print as it could limit the gantry's height.
The standoffs are hollow to save on material, but have radiuses inside and out to keep them strong..
They work remarkably well, are sturdy and allow the printer to be flipped on its side giving great access to the motherboard and psu. One thing that might be advisable is to move the hotend to the end of the gantry as it's likely to move itself!
They also make great handles to help move the printer!
If you would like them longer or shorter, load them into tinkercad, cut them up and add in the required length.
No supports needed. I printed them vertically, in low quality (0.28) but that's really up to you. Better quality would yield a nicer finish, but I did 'up' the infil to about 40% and the shell wall line count to 3..
I hope they come in handy for you.
I searched for some standoffs but couldn't find anything (which I find surprising, as all of this really annoyed me!).
I decided to make some quick standoffs that clear the Ender 3 V2 control screen and the x-axis belt adjustment. I fitted them to the right hand side by the screen, there's nothing stopping you from fitting them on the left hand side if you desire, or even both sides if you need to flip the machine from side to side!
I made three sizes, all 95mm long with 5mm thick bases.
The sizes refer to the size of the base, so the 40 20 is 40mm by 20 mm, to fit the vertical extrusion.and has two mounting holes.
The 40 30 fits nicely behind the control screen and has four mounting screws as it fits a 40mm wide rail.
the 40 60 is just a larger one with a larger diameter standoff, again four holes, the 40 30 could be used instead of this one.
I used M4 x 10mm screws with standard T-nuts, this means they hold tight but are easily removed if required, the smaller one on the vertical extrusion is the only one you would have to remove, if you were making a tall print as it could limit the gantry's height.
The standoffs are hollow to save on material, but have radiuses inside and out to keep them strong..
They work remarkably well, are sturdy and allow the printer to be flipped on its side giving great access to the motherboard and psu. One thing that might be advisable is to move the hotend to the end of the gantry as it's likely to move itself!
They also make great handles to help move the printer!
If you would like them longer or shorter, load them into tinkercad, cut them up and add in the required length.
No supports needed. I printed them vertically, in low quality (0.28) but that's really up to you. Better quality would yield a nicer finish, but I did 'up' the infil to about 40% and the shell wall line count to 3..
I hope they come in handy for you.
Similar models
thingiverse
free
Ender 3 v2 spool clip by davidruane
...ender 3 v2 spool clip by davidruane
thingiverse
i use two to keep the spool from moving side to side. it's a tight fit.
thingiverse
free
Ender 3 V2 Screen Cover by jackindex
...9;s still very flimsy and not the greatest especially the clips on the side because they don't hold onto the screen too well.
thingiverse
free
Ender 3 V2 Improved screen Knob by Woxtrot
...v2 and i don't see it coming of by itself any time soon.
update 1 - 16/11/2020
flipped model so correct face faces downwards.
thingiverse
free
Ender 3 V2 tool holder by fulior
...mproved cooling, otherwise the whole thing would be too low to fit calipers and hex keys without touching the base below printer.
thingiverse
free
Ender 3 V2 Screen left side holder by juanitolol
...it allow you to set the screen on the left side for those who don't have space on the right side like me.
hope you enjoy it!
thingiverse
free
Ender 3 V2 Knob Covers by HypnoticGuy
...e on my v2 was black, and i wanted these to be black too. but, i didn't want to paint them. so, i came up with these covers.
thingiverse
free
Ender 3 v2 X-carriage by BalintFurstner
... adapter for the v2.
i heard that the v2 has multiple versions this is one of them. i am curious to see are there differences....
thingiverse
free
SV01 or Ender3 Gantry Leveling Blocks by haduken8675309
...9;re adjusting eccentric nuts or resetting the gantry tension. cutouts to avoid sv01 gantry brace and fits behind ender 3 screen.
thingiverse
free
Ender 3 Max OctoPrint base by thething84
...ocated behind the installed lcd screen. and hole for 40mm fan is in the side to allow air cooling and a slot for a camera ribbon.
thingiverse
free
Ender 3 Pro PSU side mount by SpyderGiant
...eed any new hardware. this is a tight fit, but it doesn't move. i added both sides so you don't have to rotate it in cura
Bryfdir
thingiverse
free
Ender 3 v2 Asymmetric Riser foot by bryfdir
...or the psu cover to fit well.
one side sticks out a little bit more than the other.
fit with the sticking out section outwards.
thingiverse
free
Ender 3 v2 Motherboard cover for 92 x 25 fan no buck mounting by bryfdir
...ath the printer with thick 'car trim' double sided tape, they seem to be fine, this file might be handy for someone else.
thingiverse
free
Creality Ender 3 v2 Filament guide with spatula and cutter holder by bryfdir
...sy access for myself!
thanks to those who designed and remixed these before me, i hope my contribution will be of use to someone!
thingiverse
free
Raspberry Pi 3 (B/B+), Pi 2 B, and Pi 1 B+ case, 2020 mount with logo and deep base for standard screws by bryfdir
...might have some spares.
i hope this will help other in the same situation as me.
thank you to the original designers of the case.
4040
thingiverse
free
4040 by eplacek
...4040 by eplacek
thingiverse
thingiverse
free
4040 foot by peanutwarrior
...4040 foot by peanutwarrior
thingiverse
simple foot to attach to 4040 extrusion
thingiverse
free
MakerToolkit 4040 Extrusion by makertoolkit
...makertoolkit 4040 extrusion by makertoolkit
thingiverse
makertoolkit 4040 extrusion
thingiverse
free
4040 profile cover by Polbofree
...profile cover by polbofree
thingiverse
eng
printed cover for 4040 aluminium profiles
ita
coperture per profili in alluminio 4040
thingiverse
free
45° 4040 Mount by JacenRKohler
...45° 4040 mount by jacenrkohler
thingiverse
a 4040 mount at a 45 degree angle,
thingiverse
free
4040 corner by eplacek
...4040 corner by eplacek
thingiverse
thingiverse
free
4040 Aluminium Extrusion by ArkAngelLucifer
...4040 aluminium extrusion by arkangellucifer
thingiverse
my try on creating a 4040 aluminium extrusion model
thingiverse
free
t8 mount 4040 by peanutwarrior
...t8 mount 4040 by peanutwarrior
thingiverse
this block allows for a t8 aluminum guide to be bolted in onto 4040 extrusion
thingiverse
free
Fritzbox 4040 Shelf Holder
...0 shelf holder
thingiverse
this is a fritzbox shelf holder for the avm fritzbox 4040. it mounts the on the back side of a shelf.
thingiverse
free
4040 V-Slot Cover by icimdengelen
...4040 v-slot cover by icimdengelen
thingiverse
4040 v-slot cover
4020
thingiverse
free
Blower for 4020 by tuber
...blower for 4020 by tuber
thingiverse
blwer for 4020 fan
v2 has 30° angle
thingiverse
free
4020 remix
...4020 remix
thingiverse
2040 version
thingiverse
free
Vent. 4020 to Dymbox by glinder25
...vent. 4020 to dymbox by glinder25
thingiverse
reduction for ventilator 4020 on diy dymbox
thingiverse
free
Satsana dual 4020 by tikaroo
...satsana dual 4020 by tikaroo
thingiverse
a satsana fang remixed to use dual 4020 fans.
thingiverse
free
Micro Swiss Satsana 4020 by viniciusro
...micro swiss satsana 4020 by viniciusro
thingiverse
remix for micro swiss direct drive, using 4020 fan and 4020 blower.
thingiverse
free
4020 Fan by webasti321
... designed 4020 fanducts, just click inside the fan.
no problem with z-endstops.
needs 6x m2x16mm screws for mounting the two fans
thingiverse
free
2020 to 4020 joint by darkpiro
...020 to 4020 joint by darkpiro
thingiverse
this is a piece designed to join two single 2020 extrusions to create a 4020 extrusion
thingiverse
free
Noctua 4020 fan cover by mikap84
...noctua 4020 fan cover by mikap84
thingiverse
full cover for noctua 4020 fan
thingiverse
free
4020 to 5015 fan adapter by tikaroo
...020 to 5015 fan adapter by tikaroo
thingiverse
this adapter will allow to use a 4020 fan on the satsana shroud for part cooling.
thingiverse
free
4020 Cooling Fan Grill
...4020 cooling fan grill
thingiverse
enjoy!
Service
thingiverse
free
SERVICE STATION by leonk
...service station by leonk
thingiverse
service station
thingiverse
free
customer service by XReaper87X
...customer service by xreaper87x
thingiverse
a new customer service sign for work
thingiverse
free
Service Plate Aliens Extermination
...service plate aliens extermination
thingiverse
service plate for diy aliens extermination
thingiverse
free
1,75 serviceable oiler by DCrispy
...se
a small 1.75 serviceable oiler, dont need to remove the cap to refill your oil, just fill trough the 2 service holes and done
thingiverse
free
long service by Pat_ME
...long service by pat_me
thingiverse
award part
thingiverse
free
Service à Moka by AlbertKarlen
...service à moka by albertkarlen
thingiverse
service à moka - tasse à expresso avec sous-tasse
thingiverse
free
New 9 Service-Oriented by jasperl
...new 9 service-oriented by jasperl
thingiverse
new 9 service-oriented
thingiverse
free
Service Switch Actuator for Pinball by mjenison
...led a service switch actuator. it keeps the high voltage turned off underneath the pinball playfield while you service the game.
thingiverse
free
VW Service Man by stefanosg
...vw service man by stefanosg
thingiverse
what to do what to do. i know, i'll create and print the volkswagen service guy.
thingiverse
free
E-Revo Service Stand by Roomik
...e-revo service stand by roomik
thingiverse
simple stand for service rc cars 1:8
Standoffs
thingiverse
free
20x20 standoff
...20x20 standoff
thingiverse
standoff for 8mm linear rails.
standoff distance 20mm
thingiverse
free
Standoff by charlespax
...standoff by charlespax
thingiverse
this is a standoff created to hold up a friend's monitor.
thingiverse
free
Standoff Holder by jfaller
...standoff holder by jfaller
thingiverse
holder for for m3x6 standoff.
thingiverse
free
Commodore 64 Standoffs
...odore 64. cut off old standoffs, sand smooth then attach these standoffs with epoxy. be sure to align with the holes in the case.
thingiverse
free
BTS7960 Standoff by AlbaTito
...bts7960 standoff by albatito
thingiverse
standoff for bts7960. m3 hardware
thingiverse
free
MXQ105fpv No Standoffs by VAXHeadroom
...of the quad copter, but without the standoffs and with 3mm holes below where the standoffs were. requested by fb user ian paine.
thingiverse
free
Motherboard Standoff by maxharrison
...doff by maxharrison
thingiverse
this is a motherboard standoff that is designed to be positioned into place and then glued down.
thingiverse
free
Standoff capacitor holder
...standoff capacitor holder
thingiverse
25v/35v standoff capacitor holder. fits a 13mm capacitor.
thingiverse
free
printbed standoff feet by shawdreamer
...printbed standoff feet by shawdreamer thingiverse standoffs ...
thingiverse
free
Standoff by intijk
...standoff by intijk
thingiverse
12 + 4 mm height
Ender
thingiverse
free
Ender-5
...ngiverse
3d model of ender-5.
attention: there are some changes in later versions on ender-5, so use this 3d model with caution.
thingiverse
free
USB Holder (Ender 3 / Ender 3 Pro)
...usb holder (ender 3 / ender 3 pro)
thingiverse
usb holder that easily mounts to the ender 3 / ender 3 pro lcd housing
thingiverse
free
Ender 3V2 LCD Cover with Ender Dragon by PhotoBud
...mplistic cover with extruded ender dragon and handle designed on fusion 360 to cover and protect the lcd screen of the ender 3v2.
thingiverse
free
ENDER 3
...ender 3
thingiverse
this is my first upgrade for ender 3 printer from long extruder to short extruder
thingiverse
free
Simple QUICK PRINT LCD Cover for Creality Ender-3/Ender-3s/Ender-3 Pro/Ender-5 by 1MavZ
...e quick print lcd cover for creality ender-3/ender-3s/ender-3 pro/ender-5 by 1mavz
thingiverse
quick and simple upgrade print...
thingiverse
free
Mini Ender 3
...mini ender 3
thingiverse
mini ender 3
thingiverse
free
Ender Dragon by piisawesome314159
...ender dragon by piisawesome314159
thingiverse
the ender dragon with a base.
thingiverse
free
Ender 3 / Ender 3 / Pro - 3D Filament Support
...ender 3 / ender 3 / pro - 3d filament support
thingiverse
filament holder for plug-in ender 3 / ender 3 / pro 3d printers
thingiverse
free
Filament Guide for ENDER 3 and ENDER 3 V2 by muhannad703
...filament guide for ender 3 and ender 3 v2 by muhannad703
thingiverse
ender 3 v2
thingiverse
free
fancover ender 3
...fancover ender 3
thingiverse
fan cover for ender 3
V2
thingiverse
free
Schleuder V2 / Slingshot V2 by Ju5tMak3
...schleuder v2 / slingshot v2 by ju5tmak3
thingiverse
schleuder v2 / slingshot v2
have fun
thingiverse
free
V2 by LeoRadstrom
...v2 by leoradstrom
thingiverse
v2
thingiverse
free
Yugioh V2
...yugioh v2
thingiverse
yugioh v2
thingiverse
free
WOPR v2
...wopr v2
thingiverse
wopr v2
from the "wargame" film
thingiverse
free
KeyHolder V2
...keyholder v2
thingiverse
keyholder v2.
for those who don't like to hear keys shaking.
thingiverse
free
v2 deck by ltl20
...v2 deck by ltl20
thingiverse
v2 deck
thingiverse
free
pinquin v2 by bjarkemape
...pinquin v2 by bjarkemape
thingiverse
pinquin v2
thingiverse
free
Minion v2 by bjarkemape
...minion v2 by bjarkemape
thingiverse
minion v2
thingiverse
free
LogoAlpha v2 by AlphaProject
...logoalpha v2 by alphaproject
thingiverse
logoalpha v2
thingiverse
free
Arrowhead V2 by ogill117
...arrowhead v2 by ogill117
thingiverse
arrowhead v2
V
thingiverse
free
Saturn V
...saturn v
thingiverse
saturn v rocket
thingiverse
free
V-Slot_Filament_Guide
...v-slot_filament_guide
thingiverse
v-slot_filament_guide
anet a8 plus
thingiverse
free
V-Plate for V-Slot 20x20 by Oscard
... extrusion. with this design those two functions are separated.
to mount the two split v-plates you will need a v-slot extrusion.
thingiverse
free
V for Villanova by mfritz
...v for villanova by mfritz
thingiverse
v for villanova, v for victory
thingiverse
free
V Card
...v card
thingiverse
this v-card can be made using any filament. i only have pla, so i used that.
thingiverse
free
V-Block
...wn with freecad with the same dimensions of the one i machined when an engineering apprentice in 1971. printed with geeetech a10.
thingiverse
free
V by dcread
...v by dcread
thingiverse
miscellaneous décor.
thingiverse
free
Letra V by Xbertus
...letra v by xbertus
thingiverse
letra v
thingiverse
free
Saturn V by Romax
...saturn v by romax
thingiverse
saturn v
thingiverse
free
V-bucks by Nesvik
...v-bucks by nesvik
thingiverse
v-bucks
Slot
thingiverse
free
PC slot cover for 3.5 inch drive slot
...pc slot cover for 3.5 inch drive slot
thingiverse
pc slot cover for 3.5 inch drive slot
thingiverse
free
Slot Cover - Bosch Rexroth - 8mm Slot by ChrisWhite85
...emix of the 10mm slot extrusion cover by bagabooo.
this one designed for 8mm slots in extrusion, tested on bosch rexroth profile.
thingiverse
free
Narrower slot
...h the slot in the case narrowed. it now works perfectly with my business cards - feeding one at a time and without any blockages.
thingiverse
free
Hidden T slot for 2020 Aluminium V slot by magfurramdhani
...slot for 2020 aluminium v slot by magfurramdhani
thingiverse
this hidden t slot for aluminium v slot
give it 100% for more rigid
thingiverse
free
Slot Cover by pwing
...slot cover by pwing
thingiverse
pc part slot cover
thingiverse
free
Butter with spreader slot
...spreader slot
thingiverse
added a slot to hold relatively standard butter spreaders. slot is 22mm wide, 2mm deep, and 25mm tall.
thingiverse
free
V-slot V slot Smooth rod 10mm mount by Zwiep
...v-slot v slot smooth rod 10mm mount by zwiep
thingiverse
v-slot v slot smooth rod 10mm mount
thingiverse
free
Slots of Oval Slotted Convex Bracelet for Dual Color Print by teil3
...convex bracelet for dual color print by teil3
thingiverse
slots of oval slotted convex bracelet to use with a dualhead extruder.
thingiverse
free
v slot bearing by emxyz
...v slot bearing by emxyz
thingiverse
v-slot bearing. cuscinetto v-slot
thingiverse
free
slotted knob by derben
...slotted knob by derben
thingiverse
slotted knob for a gravy pot or anything else that it will fit.
Stands
thingiverse
free
Stand-stand by Fank86
...stands! dont have a stand to put all your stands in? well just print this and watch all your...
thingiverse
free
stand
...stand
thingiverse
a stand
thingiverse
free
A stand
...a stand
thingiverse
a stand.
thingiverse
free
Stand
...stand
thingiverse
this is a stand, nothing more !
thingiverse
free
stand
...stand
thingiverse
this is a stand that you can put things on
thingiverse
free
Headset stand with phone stand
...dset stand that doubles as a phone stand, the phone also can be charged while on the stand.
leave a comment if you have feedback
thingiverse
free
hairdryer stand and Curling iron stand
...hairdryer stand and curling iron stand
thingiverse
hairdryer stand and curling iron stand
thingiverse
free
Inbus Stand / Inbuskey Stand
...workshop.
this inbuskeys fitts perfectly in that stand:
8 ; 6 ; 5 ; 4 ; 3 ; 2,5 ; 2
enjoy your print :)
comment below if it works
thingiverse
free
Stand by cmaines
...stand by cmaines
thingiverse
stand
thingiverse
free
stand by Syzguru11
...stand by syzguru11
thingiverse
stand
3
thingiverse
free
Raspberry 3 and 3+ case
...raspberry 3 and 3+ case
thingiverse
case for raspberry 3 and 3+ wit fan
thingiverse
free
Cube Dissection Puzzle/ Model for 3^3 + 4^3 +5^3 = 6^3 by lgbu
...: oxford university press. (p. 203). the authors gave credit to a solution in eureka, the magazine of the cambridge archimedeans.
thingiverse
free
Makeblock Aluminum Pieces 3*3/3*9
...makeblock aluminum pieces 3*3/3*9
thingiverse
makeblock pieces 3x3 and 3x9 recreated for 3d printing
thingiverse
free
Floss 3 Lite - lollipop 3
...floss 3 lite - lollipop 3
thingiverse
antenna mount for floss 3 lite.
thingiverse
free
3 by obstacledaddy
...3 by obstacledaddy
thingiverse
3
thingiverse
free
????????? ??? ??????? 3 ?? by Rigel
...????????? ??? ??????? 3 ?? by rigel
thingiverse
????????? ??? ??????? 3 ??
thingiverse
free
oloid 3
...oloid 3
thingiverse
oloid 3
thingiverse
free
A stand 3
...a stand 3
thingiverse
a stand 3.
thingiverse
free
Tischlampe #3
...tischlampe #3
thingiverse
tischlampe #3
thingiverse
free
3/8 to 3/4 grommet by quikniq
...3/8 to 3/4 grommet by quikniq
thingiverse
3/8" to 3/4" grommet.