Ender 3 Pro Double Drawer V2 by SouthernTraceCircle

Last crawled date: 2 years, 11 months ago

Thanks to DWS_design for the inspiration on this project. This is a re-design of the Creality Ender 3 Pro dual drawer by DWS_Design - https://www.thingiverse.com/thing:3416444
Somehow, the original design didn't fit my printer correctly - one of the bolts on the bottom of the Y-axis wheel kept scraping the top of the drawer, so I redesigned the case to notch out that area, and made it a little longer for additional storage and a little thicker. I used 30% infill to keep it a little more sturdy.
The bottom drawer includes a storage cylinder for a regular Elmer's Glue Stick, which is conveniently positioned under the Y-axis, so as to not get in the way. The drawer is also sectioned with storage bins and a built-in area for extruder nozzles. If you don't want this, or you want just a plain drawer, you can TinkerCad and remove the sectioned area easily.
The top drawer is a simple, open drawer with no sections. Again, TinkerCad is your friend if you want to section this drawer.
You'll want to print two knobs, which are keyed so they lock into place on the drawer face. The knobs will accommodate a 7mm nut to allow for a tight fit with a 22mm bolt and a washer (see photo).
Printing:
Use supports for the knob (touching the baseplate), and print upside down for the slot. Print the drawer case vertically with supports for the guides only. No supports needed for the drawers.
Please comment. Thanks.