Thingiverse
Ender 3 Direct Drive Mount for Ditan Dual Extruder
by Thingiverse
Last crawled date: 4 years, 3 months ago
I designed this very basic part as I wanted to be able to mount the Ditan Dual Extruder as a Direct Drive on my Ender 3.
I had been using the Ditan for a while as a Bowden Setup and was very impressed with the design and performance but wanted to reduce the length of the filament path to the nozzle to improve my overall printing quality/speeds, etc.
The primary goal was not loose any of the Ender 3's build volume(height or width) while still using the standard stepper motor.
To achieve this meant that I would need to mount the Ditan in an orientation which prevented the setup from colliding with the frame, but still let the couplers line up, creating a straight filament path from the Ditan intto the Nozzle.
I printed the part shown in the images in PETG with a 0.8mm nozzle, @ 0.6mm layer height, 6walls (to have most of the part solid), 50% infill, 20% fan(2x 50x15 blowers) and at 50mm/s and with brim & support from the build plate.
**That said, I would recommend printing in PETG/ABS/PLA with at least 5walls, and a max of 0.4mm layer height to get a neater part.
I printed it with the above settings as I wanted to quickly print a test part, and then intended to reprint a neater version once I confirmed it worked the way I designed it too.
BUT the first "fast & ugly" test part I printed proved that the design worked as intended and it was strong enough plus working well enough to simply leave it on the setup... so I did just that.
How to install:
This plate must be installed in place of the two spacers which are located on the 2x Bolts holding the two top wheels in the correct position on the hotend assembly to run in the v-slot.(see design images)
I added a 3rd wheel to help support the motor which protrudes out to the right of the hotend assembly as I had some spare wheels , but I am sure you could first try it without fitting this third wheel and it should work just as well.
You will need to cut a piece off of your PTFE tubing which is long enough to fit from inside the hotend (touching the nozzle inside) to into the Ditan. This should be a snug fit to the inside of the Ditan Part which the coupler screws into and line up with the filament hole.
Note the HeroME (as seen in the images) does not fit as a standard part. I had to remove the cable guide and also the part of the base which hooks around the right hand side of the hotend mounting plate to get it to fit.
I will be changing to the CR-10 / Ender 3 Dual 40mm Part Cooling Fan Ductinator (thing:3594440) for part cooling in the near future.
I had been using the Ditan for a while as a Bowden Setup and was very impressed with the design and performance but wanted to reduce the length of the filament path to the nozzle to improve my overall printing quality/speeds, etc.
The primary goal was not loose any of the Ender 3's build volume(height or width) while still using the standard stepper motor.
To achieve this meant that I would need to mount the Ditan in an orientation which prevented the setup from colliding with the frame, but still let the couplers line up, creating a straight filament path from the Ditan intto the Nozzle.
I printed the part shown in the images in PETG with a 0.8mm nozzle, @ 0.6mm layer height, 6walls (to have most of the part solid), 50% infill, 20% fan(2x 50x15 blowers) and at 50mm/s and with brim & support from the build plate.
**That said, I would recommend printing in PETG/ABS/PLA with at least 5walls, and a max of 0.4mm layer height to get a neater part.
I printed it with the above settings as I wanted to quickly print a test part, and then intended to reprint a neater version once I confirmed it worked the way I designed it too.
BUT the first "fast & ugly" test part I printed proved that the design worked as intended and it was strong enough plus working well enough to simply leave it on the setup... so I did just that.
How to install:
This plate must be installed in place of the two spacers which are located on the 2x Bolts holding the two top wheels in the correct position on the hotend assembly to run in the v-slot.(see design images)
I added a 3rd wheel to help support the motor which protrudes out to the right of the hotend assembly as I had some spare wheels , but I am sure you could first try it without fitting this third wheel and it should work just as well.
You will need to cut a piece off of your PTFE tubing which is long enough to fit from inside the hotend (touching the nozzle inside) to into the Ditan. This should be a snug fit to the inside of the Ditan Part which the coupler screws into and line up with the filament hole.
Note the HeroME (as seen in the images) does not fit as a standard part. I had to remove the cable guide and also the part of the base which hooks around the right hand side of the hotend mounting plate to get it to fit.
I will be changing to the CR-10 / Ender 3 Dual 40mm Part Cooling Fan Ductinator (thing:3594440) for part cooling in the near future.
Similar models
thingiverse
free
Creality Ender 3 Pi Cam Extender Arm by SFLeBrun
...en when positioning the camera to make sure that the hotend box does not touch the camera when the hotend is at the x 0 position.
thingiverse
free
Ender 3 Pro Filament Sensor Mount by rgruian
...ind over time. i am using it without the additional tube, however, and it works just fine. print in pla or petg for best results.
thingiverse
free
Dual gear extruder direct mount with BL Touch mount
... mounts together in shapr3d and printed in petg.
you will need to add spacers under the bl touch to adjust this to your hotend.
thingiverse
free
Tevo Stock Dual Hotend Magnetic Mount by cardiac4
... setup on the dual extruder so i made this. i did shave a little off the sides so parts like fang fans would fit a little better.
grabcad
free
Pizza Cutter Cover
...irst layer, 70 c for the rest
layer height: 0.12 (i used the stock 0.4mm nozzle)
dynamic layer height: yes (speeds up print time)
thingiverse
free
Ender6 Filament Relocation by kysham
... of the printer, this setup might work for you too. i don't know. you have to try it out yourself. but i can see it can work.
thingiverse
free
Ender 3 + Micro Swiss Hot End Cooling Ring by Lassidor
... the modified design fits perfect! i recommend printing in petg or some other high-temp filament due to proximity to the nozzel.
thingiverse
free
Creality Ender 3 (Pro) Extruder plate for Bondtech Push-Fit Adapter by Alphaelectric
...ive / push-fit adapter. you can get them anywhere on the net. simply put it in and lock the amount of desired ptfe tube in place.
thingiverse
free
Bowden Tube Cutter for Ender by lysithea81
...increased thickness of fragile parts for improved strength (i had printed the original design, which worked great, but it broke).
thingiverse
free
Ender Filament Spool Insert. by jwestonh
....
upd, i am not waiting 5 hours x2 for this. alternatively, i simply used a carboard tube which i had laying around which fit. ;)
Ditan
thingiverse
free
DITAN - mount on CR10
...flatwasher - use it as spacer to mount your ditan on the upper holes.
done
still under construction and feedback welcome.
thanks
thingiverse
free
One-sided Bridged Ditans by Compu22le
...are joined with bridges all corners must be rounded to get space for the bridges. the concept is also shown at the logelium site.
3dwarehouse
free
ditan
...ditan
3dwarehouse
Ender
3ddd
$1
Enders / Elegance
...enders / elegance
3ddd
обогреватель
уличный газовый обогреватель enders elegance
высота: 2200 мм
3d_export
free
ender 3 frame cavity covers
... of the creality ender 3 - makes it look a bit more attractive it just slides into the open channels of the aluminium framework
turbosquid
$1
pen support for ender 3
...y free 3d model pen support for ender 3 for download as blend on turbosquid: 3d models for games, architecture, videos. (1611282)
3d_ocean
$9
Ender Dragon Minecraft
...ojang obj poly videogames
ender dragon minecraft created with cinema 4d r15 formats included: max 2013 – fbx 2012 – c4d r15 – obj
3d_export
free
Creality ender enclosure webcam mount
...e creality enclosure. sure is better than a tripod. change it up if it helps. i printed pla with 50% infill on my dd ender 3 pro.
3d_export
free
ender 3 enclosure corners
...er corners and 4 upper corners, using 25mmx25mm angled aluminium pieces that gets covered on inside of the frame with plexiglass
3d_export
free
ender 3 3d print bed clips
...ed + normal aluminium bed frame of the creality ender 3 = 6mm (b) these clips are designed for glass plate + aluminium bed = 4mm
3d_export
$5
GRUMPY CAT
...grumpy cat 3dexport grumpy cat to print in ender ...
3d_export
$5
Logs fire
...with one multi material for corona and vray r ender. albedo, normal, uvmap, roughness format jpg 4096x4096 models:...
3d_export
$42
excavator
...is the original size. 0.12 mm printing surface creality ender5 ...
Dual
turbosquid
free
Dual Pistols
...ls
turbosquid
free 3d model dual pistols for download as fbx on turbosquid: 3d models for games, architecture, videos. (1320360)
turbosquid
$2
Dual Axe
...urbosquid
royalty free 3d model dual axe for download as fbx on turbosquid: 3d models for games, architecture, videos. (1332372)
turbosquid
$10
Dual Lesaths
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
плитка Dual Bianco (Испания)
...й плитки venis dual (испания). технические качества: устойчивость к стирания, отличная геометрия, отсутствие проблем при укладке.
turbosquid
$35
Dual Mesh Fonts
...ree 3d model dual mesh fonts for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1352989)
turbosquid
$29
Dual Flask with Bungs
...del dual flask with bungs for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1210512)
turbosquid
$19
Dual Socket Plug
...3d model dual socket plug for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1303912)
turbosquid
$13
Dual Adjustable Pulley
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Amoi N809 Dual
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Dual Turret Tank
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Direct
design_connected
free
Compas Direction
...compas direction
designconnected
free 3d model of compas direction by vitra designed by prouvé, jean.
design_connected
$18
Direction Pivotant
...direction pivotant
designconnected
vitra direction pivotant computer generated 3d model. designed by prouvé, jean.
turbosquid
$6
not direct the front
...oyalty free 3d model not direct the front for download as max on turbosquid: 3d models for games, architecture, videos. (1213034)
turbosquid
$10
Rails Direct
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Picto toilet directions
...lude 3d files next to rhino6: x3dv, step, igus, obj and stl. double-sided, flipping changes the gender directions to the toilets.
3ddd
$1
fauteuli direction
...d
chair , vitra , fauteuli
fauteuli vitra chair
design_connected
$18
Fauteuil Direction, 1951
...fauteuil direction, 1951
designconnected
vitra fauteuil direction, 1951 computer generated 3d model. designed by prouvé, jean.
3d_export
$5
Directional tactile 3D Model
...tactile 3d model
3dexport
directional tactile braille tile flooring interior
directional tactile 3d model renob000 71068 3dexport
turbosquid
$26
Radio direction finder A
...ty free 3d model radio direction finder a for download as fbx on turbosquid: 3d models for games, architecture, videos. (1212490)
turbosquid
$7
Wooden direction signage
...ty free 3d model wooden direction signage for download as max on turbosquid: 3d models for games, architecture, videos. (1453747)
Drive
turbosquid
$90
Drive
...turbosquid
royalty free 3d model drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1654393)
3d_export
$10
cycloidal drive
...cycloidal drive
3dexport
cycloidal drive
3d_ocean
$5
Flash Drive
...h drive included : – materials – scene ( lighs / room ) – .c4d + .obj for any questions please feel free to contact me thank you.
3d_ocean
$5
Usb drive
...s shaders and a lighting setup. it also has a small animation of it going in and out. i saved it out as both a .blend file and...
3d_ocean
$5
Pen Drive
...est computer drive game model good low poly new pen pen drive textured unwrapped uv very low poly
a very beautiful low poly model
3d_ocean
$10
External hard drive
... is a detailed model of a trekstor external hard drive. you can easily modify the label on the top. simply edit the text objects.
turbosquid
$60
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1254314)
turbosquid
$50
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1263524)
turbosquid
$45
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1287060)
turbosquid
$40
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1261902)
Extruder
3ddd
$1
Extruded Chair
...extruded chair
3ddd
extruded , tom dixon
inspired by tom dixon extruded chair
turbosquid
$15
Extruded Table
... extruded table for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1634137)
turbosquid
$2
3D Printer Extruder
...d
royalty free 3d model 3d printer extruder for download as on turbosquid: 3d models for games, architecture, videos. (1537359)
turbosquid
$1
Zombie extruded text
...oyalty free 3d model zombie extruded text for download as obj on turbosquid: 3d models for games, architecture, videos. (1322198)
turbosquid
$4
Extruder conical screw
...el extruder conical screw for download as sldpr, ige, and stl on turbosquid: 3d models for games, architecture, videos. (1524433)
turbosquid
$50
3d PRINTER - Extruder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Extruded Table 2
...xtruded table 2 for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1621846)
turbosquid
$10
Maya Extrude Tool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
world earth extrude map
...world earth extrude map
3dexport
3ddd
$1
Simply Elegant Extruded Tree Coffee Table Design
...ble by link studios. the silhouette of a tree is visible at one angle, extruded from the surface to create the support structure.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
3
turbosquid
$10
Mountain Bike 3 -3 of 3
...model mountain bike 3 (#3 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438752)
turbosquid
$6
Rock 3-3
...urbosquid
royalty free 3d model rock 3-3 for download as obj on turbosquid: 3d models for games, architecture, videos. (1628065)
turbosquid
$29
Books 150 pieces 3-3-3
...books 150 pieces 3-3-3 for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1384033)
turbosquid
$3
Genesis 3 Clothing 3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
hinge 3
...hinge 3
3dexport
hinge 3
3ddd
$1
Розетка 3
...розетка 3
3ddd
розетка
розетка 3
turbosquid
$50
is-3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Mountain Bike 3 -2 of 3
...model mountain bike 3 (#2 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438750)
turbosquid
$10
Mountain Bike 1 -3 of 3
...model mountain bike 1 (#3 of 3) for download as fbx and blend on turbosquid: 3d models for games, architecture, videos. (1438743)
3d_export
$5
3 CATS
...3 cats
3dexport
3 cats pen holder