Enclosure for new SMD-based geiger counter by impexeris for SBM20 and STS-5 tubes by glassy

Last crawled date: 3 years, 1 month ago

--- update 2020-02-01 I have added a cap for SBM-20M (shorter tubes) adapterM-SBM-20.stl
This is a revised enclosure for the new - SMD based hardware version of the DiY geiger counter ( http://www.ebay.com/itm/162282227238?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 and https://github.com/impexeris/DiY-Arduino-Geiger-Counter-SMD/tree/master/Enclosure%20.files%20for%203D%20printing ) by my colleague - eBay vendor impexeris ( http://www.ebay.com/usr/impexeris) .
note: this enclosure is originally for SBM-20 Geiger Müller tube.
if you have an STS-5 (CTC-5) tube print Top-for-STS-5-geiger-tube.stl Bottom-for-STS-5-geiger-tube.stl files. STS-5 is very similar to SBM-20 but it is 2 mm longer.
https://youtu.be/GOD-LSD_Pks
This enclosure is for use with SBM-20 or CTC-5 geiger tubes.
Besides adjusted geometry for LCD / buzzer / LED, iR receiver power switch and push-buttons new features of the enclosure are:
additional opening for for the "click/tone" switch
additional opening for for the "tone" button
additional opening for serial header access (this opening is semi closed so if it is needed, it can easily be cut-open)
now the LCD rests on the support pins which direct the display more precisely to its place.
whole device snaps in and is held by springy-clips
battery is kept in place by springy-clips
screw holes and columns are introduced to allow bottom cover to be securely held by two ∅2mm diameter/10mm long screws (∅4mm head diameter)
If you found my design useful or inspiring and would like to buy me a cup of espresso you are welcome to tip me:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=U25V96GZNVL3N&source=url
Thank you!