Electrified Terminator with LED eyes by DrPFF

Last crawled date: 2 years, 12 months ago

Here I have modified the T-800 model published by machina to embed a 3D printed circuit inside of it. The circuit is made of Electrifi filament and powers two 5050 LEDs in the eyes. I've included the separate stl files as well as an amf file for your convenience. The model includes a compartment for inserting a battery, screw terminals for an easy, secure connection, and ample room for your connecting wires and more. Special thanks to all who have worked on designing the T-800 model before it got to me.
EDIT
I collaborated with multi3d to publish an instructable which will walk you through the details. You can find it here: http://www.instructables.com/id/Electrified-Terminator-With-LED-Eyes/
To make this you will need:
• Dual extruder 3D printer (Autolift hot ends highly recommended http://www.dglass3d.com/shop/autolift-all-metal-hot-ends/)
• 2 x 5050 red LEDs
• Electrifi conductive filament (https://www.multi3dllc.com/product/electrifi-3d-printing-filament/)
• Regular PLA filament
• A solder reflow workstation (a hair dryer can also work in a pinch)
• Lithium polymer battery and charger
• JST connectors
• 2 x 2mm bolts
• 2 x 2mm washers
• 2 x 2mm nuts
• wrench or screwdriver to fit your bolts
• small needle nose pliers or tweezers
Printing Parameters:
Bed Temperature: 75 C
Layer Height: 0.2 mm
Electrifi filament parameters:
• Print Speed: 30 mm/s
• Temperature: 150 C
• Retraction Speed: 600 mm/min
• Normal Retraction: 3 mm
• Dual Retraction: 12 mm
• Nozzle diameter: 0.5 mm
• Infill: 100%
• Perimeters: 1
• Prime tower
PLA filament parameters:
• Print Speed: 50 mm/s
• Temperature: 195 C
• Retraction Speed: 600 mm/min
• Normal Retraction: 3 mm
• Dual Retraction: 12 mm
• Nozzle diameter: 0.5 mm
• Infill: 20%
• Perimeters: 2